Part Audit and Datasheet Review

flux

Read the attached instructions and applied them by updating the project document with the full grouped Terminal Order table using the current renamed terminals.
Open items:
  • None for the terminal-order request.
  • Short check in the document reports: 94/94 OK terminals, 0 rename needed, 0 uncertain.
Suggested next step:
  1. Review ME310G1-W1 Part Audit and Terminal Order Table and publish/update the part if it looks good.
C

cherepanyadima

Read the file and follow all instructions.
pasted-text-1783019761465

flux

I’ll read the attached file and apply its instructions to the current part project.

flux

Read the attached file and applied its terminal-order instructions to the current ME310G1-W1 part.
Open items:
  • None for this instruction set.
  • The project currently has duplicate ME310G1-W1 Terminal Order Table documents, so I refreshed both entries.
Suggested next step:
  1. Optionally remove/merge the duplicate terminal-order document to keep one source of truth.
Merge docs and review
Merge duplicate docs
Rerun part review
Verify pin orientations
Check footprint export
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
GND_1
A3
Ground
Ground
12
CELL_MAIN_ANTENNA
A5
Bi-Directional
Interface
2
GND_2
A7
Ground
Ground
12
GND_3
A9
Ground
Ground
12
RES_1
A11
Reserved
Other
11
GND_4
A13
Ground
Ground
12
RES_2
A15
Reserved
Other
11
GND_5
A17
Ground
Ground
12
VBATT
AA3
Power In
Power
1
SPI_MOSI
AA5
Bi-Directional
Interface
7
SPI_CLK
AA7
Bi-Directional
Interface
7
RX_AUX
AA9
Input
Interface
6
C104/RXD1
AA11
Output
Interface
6
C105/RTS1
AA13
Input
Interface
6
C104/RXD0
AA15
Output
Interface
6
C106/CTS0
AA17
Output
Interface
6
S_LED
B2
Output
Control
3
GND_6
B4
Ground
Ground
12
GND_7
B6
Ground
Ground
12
RES_3
B8
Reserved
Other
11
GND_8
B10
Ground
Ground
12
GND_9
B12
Ground
Ground
12
GND_10
B14
Ground
Ground
12

ME310G1-W1