Completed the MAX9526AEI+ datasheet review and grouped every pin exactly once by primary function. The official Analog Devices datasheet was already set, pinout matched the 28-QSOP datasheet, and I updated pin groups, sections, pin types, orientations, and descriptions.
Open items:
Exact Maxim/ADI land pattern 90-0173 dimensions were not available in the extracted datasheet text, so the footprint was verified by package type, 28-pad count, and QSOP pitch rather than full dimensional QA.
Add a Section property to all pins, and apply the same value used in the Pin Group property to each pin's Section property.
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
I’ll generalize the pin groups, mirror each Pin Group into Section, then assign Terminal Order and orientations with Power at top/order 1 and Ground at bottom/order 10.
Updated all pins with more general functional groups and matched each pin’s Section to its Pin Group.
Open items:
Flux warned that “Reserved” is not a standard suggested Pin Group/Section value, but I kept it for the I.C. pin because that best reflects its datasheet role without incorrectly mixing it into another group.
Suggested next steps:
Visually rearrange the symbol pins to reflect the new grouping/orientations.
Run a final symbol/footprint QA pass before publishing the part.