Part Audit Review

Worked for 3 mins 26 sec

Created a project doc

Part Audit

Part Audit Result

The stored official datasheet URL is already populated, so no Datasheet property update was required. The MPN and 8-pin TSOT-23 package identity match the Analog Devices ordering information.

Verification note: the datasheet extraction returned official Analog Devices OCR evidence but did not expose resolvable inline citation IDs in this session. Values below were cross-checked against the attached official datasheet; inline provenance markers are therefore unavailable.

Current part information Key specifications

Function: micropower pushbutton on/off controller with microprocessor interrupt.
Variant: LTC2954-2, with a low-true, open-drain enable output.
Supply operating range: 2.7 V to 26.4 V.
VIN absolute maximum: −0.3 V to 33 V.

flux

Audit complete. The official Analog Devices datasheet was already correctly attached; MPN, 8-pin mapping, TSOT-23 package family, body outline, and 0.65 mm pitch match.

Flagged issues include missing Part Type/pin descriptions, unspecified pin electrical types, ambiguous pin-6 EN/~EN naming, and footprint pads that differ from the recommended land pattern. Full details: Part Audit.

adrian95

Set Part Type, add pin descriptions and electrical types, and rename pin 6 to ~EN.

Thought for 7 sec

flux

I’ll update the part classification and all terminal metadata, rename pin 6 to ~EN, then verify the symbol definitions.

Worked for 59 sec

flux

Updated and verified:

Part Type: Power Management
Added descriptions and valid electrical types to all eight pins
Renamed pin 6 from EN/~EN to ~EN
Set ~INT and ~EN as Open Collector
Component review checks are clear

Correct footprint geometry

Complete part metadata

Review pad manufacturability

Add usage guidance

Files

Pins

Symbol

Layout

3D View

LTC2954ITS8-2#PBF