LSM6DS3TR C Review

Worked for 39 sec

Updated and verified all pins.

Generalized groups: Power, Ground, Interface, Digital I/O, Other
Added/updated Section on every pin to exactly match its Pin Group
Kept the one-pin-one-group rule intact; no pin is assigned to multiple groups.

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

Thought for 7 sec

flux

I’ll assign terminal ordering and orientations by group, keeping Power at order 1/top and Ground at order 10/bottom, with the remaining groups split across left/right.

Worked for 1 min 20 sec

flux

Assigned and verified Terminal Order and Pin Orientation.

Power: order 1, orientation Top
Interface: order 2, orientation Left
Digital I/O: order 3, orientation Right
Other: order 9, orientation Right
Ground: order 10, orientation Bottom

Note: there are three remaining non-power/non-ground groups but only two allowed remaining orientations (Left/Right), so Other shares Right with Digital I/O while the left/right distribution requirement is still met.

Fix labels and review

Fix pin 1

Update footprint reference

Add MEMS keepout

Run part review

Files

Pins

Symbol

Layout

3D View

LSM6DS3TR-C