Datasheet Pin Grouping

flux

Done — I generalized the functional groups and set every pin’s Section to match its Pin Group exactly.
Open items:
  • None.
Suggested next steps:
  1. Review the symbol visually to confirm the new broad groups read the way you want.
  2. If desired, I can also reorder the symbol pins by these generalized sections.
A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

I’ll assign Terminal Order and Orientation by group, keeping Power at order 1/top and Ground at order 10/bottom; since there are more groups than four orientation values, I’ll distribute the remaining groups across left/right rather than forcing an impossible unique orientation per group.

flux

Done — Terminal Order and Pin Orientation are assigned across the pin groups.
Open items:
  • Because the part has more functional groups than unique orientation values, I distributed non-power/ground groups between Left and Right rather than making every group uniquely oriented.
Suggested next steps:
  1. Visually inspect/regenerate the symbol to confirm the grouping layout reads well.
  2. If you want, I can revise the group ordering to prioritize RF/USB/debug differently.
Review and arrange
Arrange symbol pins
Verify pin metadata
Fix ordering conflicts
Export symbol preview
Sign up to send

Files

Pins

Symbol

Layout

3D View

LBUA5QJ2AB-828