Audit complete. The existing Datasheet URL already points to the official ST L9396 datasheet, so no update was needed.
Key issues: the exposed pad is 6 × 6 mm instead of the specified 4.5 × 4.5 mm, Part Type is incorrectly set to Inductors, package metadata is missing, and all 65 terminals lack descriptions, electrical types, and grouping metadata. Full findings are in Part Datasheet Audit.
Suggested next steps
Correct the exposed-pad footprint geometry.
Populate pin descriptions/types and repair symbol rendering.
Correct the part classification and package properties.
Confirm the exposed-pad electrical connection with ST before assigning a net.
I’ll organize all 65 terminals into datasheet-based functional groups, keep Section equal to Pin Group, apply consistent side orientations, and verify the regenerated symbol for completeness and readability.
Organized all 65 terminals into 10 datasheet-based functional groups. Every terminal now has a matching Pin Group and Section, consistent orientation, and unique pin-number-ordered Terminal Order.
Power: Top
Ground: Bottom
Analog, wheel-speed, motor-pump, and reserved: Left
Fail-safe, VCORE, switching regulators, and digital interface: Right
Pin names, numbers, footprint mappings, and assets were preserved. EP remains grouped under Ground without asserting an undocumented electrical net.