ECS Part Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 9 sec
I’ll audit the part metadata, source the official ECS documentation if needed, cross-check the symbol and footprint pin-by-pin, and update the Datasheet property when absent.
Worked for 2 mins 51 sec
Audit complete. The official ECS datasheet URL was already set; MPN, 4-pin count, 12.288 MHz, 3.3 V HCMOS output, ±2.5 ppm stability, −30 to +85°C range, and pin mapping all match.
- Symbol: Pin functions are correct, but pin descriptions are absent and pin types are “Unspecified.”
- Footprint: Embedded geometry matches ECS’s recommended land pattern, but rendered PCB geometry is 1000× undersized due to a unit-scaling defect.
- Metadata: Manufacturer is correctly stored as ECS, though the library manufacturer classification shows “Other” and Part Type is blank.
I filed an internal part-quality report for the footprint scaling defect.
Fix metadata and rerun
Correct footprint scaling
Add audit document
Check 3D alignment
