This project is a LoRa telemetry with ATGM336H GNSS controlled by ESP32-S2-mini Template #drone #LoRa #rfm9x #ESP32 #controller #referenceDesign #project #template #ATGM336H #GNSS

The SparkFun ZOE-M8Q GPS Breakout is a high accuracy, miniaturized, GPS board that is perfect for applications that don't possess a lot of space. The on-board ZOE-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, BeiDou, and Galileo constellations. This increases precision and decreases lock time and thanks to the onboard rechargable battery you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally, this u-blox receiver supports I2C (u-blox calls this Display Data Channel) which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.

ESP32 Dual-Band RTK GNSS Reference Design with u-blox ZED-F9P

Ruggedized battery-powered PeakNode 1 LoRa PWAN node with SX1262 LoRa mesh over SPI, LTE Cat-M1/NB-IoT modem, GNSS, LPCNet-capable audio path, USB-C charging and LiFePO4 power management. Targets a 4-layer 90 mm x 60 mm IPC Class 2 layout with 3.3 V main and 1.8 V I/O rails, dual SMA antennas, two RGB status LEDs, three tactile buttons, low-leakage power architecture for sub-10 uA sleep, and defined RF keep-out zones under the LoRa and LTE antenna regions.

This project is a LoRa telemetry with ATGM336H GNSS controlled by ESP32-S2-mini Template #drone #LoRa #rfm9x #ESP32 #controller #referenceDesign #project #template #ATGM336H #GNSS

NEO-M9N GPS Breakout with on-board chip antenna is a high quality GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations witn ~1.5 meter accuracy. This breakout supports concurrent reception of four GNSS. This maximizes position accuracy in challenging conditions, increasing precision and decreases lock time; and thanks to the onboard rechargeable battery, you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally, this u-blox receiver supports I2C (u-blox calls this Display Data Channel) which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.

The Wio-WM1110 is a fusion positioning module for developing low-power, long-range IoT applications. It's embedded with Semtech LR1110 and Nordic nRF52840, features Semtech's LoRa technology for long-range wireless communication, GNSS, Wi-Fi, and Bluetooth for location tracking services.

ZED-F9P series GNSS (Beidou, Galileo, GLONASS, GPS) Evaluation Board #EvaluationBoard #ZED-F9P #GPS #project #template

ZED-F9P series GNSS (Beidou, Galileo, GLONASS, GPS) Evaluation Board #EvaluationBoard #ZED-F9P #GPS #project #template

This project is a LoRa telemetry with ATGM336H GNSS controlled by ESP32-S2-mini Template #drone #LoRa #rfm9x #ESP32 #controller #referenceDesign #project #template #ATGM336H #GNSS

This project is a LoRa telemetry with ATGM336H GNSS controlled by ESP32-S2-mini Template #drone #LoRa #rfm9x #ESP32 #controller #referenceDesign #project #template #ATGM336H #GNSS

Raspberry Pi-based drone control PCB focused on mission endurance for an assumed 10 km travel mission. Camera-specific circuitry and storage subsystems are removed. The Raspberry Pi remains the central processing unit and interfaces to power management, RF telemetry/control, GNSS, IMU, ESC/PWM outputs, battery monitoring, and debug interfaces. Assumption: the 10 km requirement is treated as mission travel/range rather than 10 km altitude, subject to later airframe and regulatory review.

4-layer marine GPS timing and communication device using nRF52840, u-blox ZED-F9P GNSS with external active antenna via u.FL, 915 MHz LoRa radio, Li-ion battery with USB-C charging, separate clean GNSS LDO and digital 3.3V rail, SPI memory LCD, RGB LEDs, buzzer, and 6-axis IMU. PCB target is a 70 mm circular layout with strict RF zoning, dedicated ground plane, 50 ohm RF traces, physical separation between GNSS and LoRa, and low-noise placement suitable for harsh marine environments.

Passive BLE tracker locator with ESP32-S3, 2.4-inch TFT UI, USB-C charging, LiPo battery power, GNSS logging, 2.4 GHz BLE/Wi-Fi energy detection, passive BLE advertisement identification in firmware, and optional ADL5904 cellular-band sensing.

Compact wearable smart cat collar PCB focused on ultra-low power, miniaturized size, curved-edge waterproof-friendly mechanical fit, GNSS tracking, motion sensing, RFID compatibility, Li-ion charging, and robust mass-production readiness.

Production-defensible Rev B ear tag tracker using nRF9151 with separate LTE and GNSS antennas, solar-assisted LiPo charging, battery protection, SPI NOR flash, NFC, eSIM, I2C sensors, Tag-Connect SWD, grouped EVT test points, and RF/power zoning on a 40 mm x 24 mm 4-layer PCB.

Falcon One v1 – Compact STM32-Based GNSS + LoRa 915 MHz Telemetry Node with LiPo Power and USB-C

AT6558R-5N32 기반 GNSS/GPS 수신 모듈 회로 설계