Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll review the part metadata and existing symbol/footprint, find the official datasheet if missing, update the Datasheet property if needed, then verify pins and summarize any mismatches.
Key issue flagged: the symbol is acceptable for a non-polarized 2-pin capacitor, but the footprint pads do not match the datasheet — expected 10.0 mm lead spacing and through-hole pads for 0.6 mm leads; current pad geometry appears near-zero spacing and far too small.