Part Audit Review
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 8 sec
I’ll audit the part metadata, locate the official Infineon datasheet if needed, update the Datasheet property, then verify the symbol pins and footprint against the manufacturer documentation.
Worked for 5 mins 38 sec
Created a project doc
Part Audit Report
Part Audit Report
Scope and sources
Reviewed the published Flux part, its project properties, ten schematic terminals, imported KiCad footprint, and attached 3D model. Cross-checked against the official Infineon product page and official BSC059N04LS6 datasheet URL:
- Official product page: https://www.infineon.com/part/BSC059N04LS6
- Official datasheet: https://www.infineon.com/assets/row/public/documents/24/49/infineon-bsc059n04ls6-datasheet-en.pdf
- Datasheet revision returned by extraction: Final Data Sheet Rev. 2.1, 2020-07-22
The part already had a Datasheet URL set (a Mouser-hosted copy), so it was not changed. The official Infineon URL above is preferred for future maintenance.
Current part metadata
Key specificationsAudit complete. The MPN, manufacturer, electrical ratings, and pins 1–8 are correct; the existing Datasheet URL was already populated, so it was not changed.
Key issues:
- High: 10 schematic terminals versus 8 datasheet pins.
- High: Full-area paste opening on the thermal/drain pad instead of segmented stencil apertures.
- Missing pin descriptions and electrical types.
- Inconsistent package designation.
Full findings: Part Audit Report. I also filed an internal part-quality report for the production-critical issues.
Fix symbol and stencil
Update datasheet source
Validate footprint geometry
Clean silkscreen labels
