Set the Datasheet URL to the official Maxwell PDF and completed the part review in BCAP0360 P270 S18 Part Review.

Key flags: metadata is broadly correct, but the symbol is under-specified—no polarity, no pin descriptions, and all four terminals are Unspecified; the two blank mechanical terminals must be clearly isolated/NC per datasheet. The footprint body diameter looks plausible, but pad polarity mapping and drill/hole geometry need verification before publishing or ordering.

I’ll update the four terminal definitions so the symbol explicitly shows +, −, and two isolated mechanical/NC support terminals, then verify the properties.

Updated and verified the symbol terminal properties:

Open item: the footprint pad-to-datasheet mechanical mapping and drill size still need separate verification if you want this part fully publish-ready.