AP1302 Part Review

Thought for 5 sec

I’ll inspect the part metadata, look for an official datasheet if needed, then compare the symbol/footprint/pin descriptions against the datasheet and update the Datasheet property if it’s missing.

Worked for 58 sec

flux

The part already has a Datasheet URL set, so I’ll use that as the source for the cross-check rather than changing it.

Worked for 9 mins

Created a project doc

AP1302CSSL00SMGA0-DR Part Review

View Document

Date: 2026-07-09 Reviewed available Flux part information for AP1302CSSL00SMGA0-DR: MPN, manufacturer, package/footprint, 120 schematic term...

flux

Completed the AP1302 part review and created AP1302CSSL00SMGA0-DR Part Review with the detailed findings.

Open items:

No pin-to-ball mismatches found.
Main issues flagged: all terminal Pin Types are still Unspecified, Pin Description metadata is missing, and the footprint pad size is plausible but not confirmed against an onsemi land-pattern table.
Datasheet URL was already set, so I did not change it.

Suggested next steps:

Update terminal Pin Type properties from the datasheet.
Add Pin Description properties from Table 12.
Verify exported footprint dimensions/Gerbers before publishing.

Fix metadata and verify

Update pin metadata

Verify footprint dimensions

Run review checks

Use official datasheet

Files

Pins

Symbol

Layout

3D View

AP1302CSSL00SMGA0-DR