AP1302 Part Review

flux

I’ll inspect the part metadata, look for an official datasheet if needed, then compare the symbol/footprint/pin descriptions against the datasheet and update the Datasheet property if it’s missing.

flux

The part already has a Datasheet URL set, so I’ll use that as the source for the cross-check rather than changing it.
Created a project doc

AP1302CSSL00SMGA0-DR Part Review

View Document
Date: 2026-07-09 Reviewed available Flux part information for AP1302CSSL00SMGA0-DR: MPN, manufacturer, package/footprint, 120 schematic term...

flux

Completed the AP1302 part review and created AP1302CSSL00SMGA0-DR Part Review with the detailed findings.
Open items:
  • No pin-to-ball mismatches found.
  • Main issues flagged: all terminal Pin Types are still Unspecified, Pin Description metadata is missing, and the footprint pad size is plausible but not confirmed against an onsemi land-pattern table.
  • Datasheet URL was already set, so I did not change it.
Suggested next steps:
  1. Update terminal Pin Type properties from the datasheet.
  2. Add Pin Description properties from Table 12.
  3. Verify exported footprint dimensions/Gerbers before publishing.
Fix metadata and verify
Update pin metadata
Verify footprint dimensions
Run review checks
Use official datasheet
Sign up to send

Files

Pins

Symbol

Layout

3D View

AP1302CSSL00SMGA0-DR