Part Datasheet Review

cherepanyadima

cherepanyadima

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll inspect the part metadata, look for an official datasheet if needed, then compare the symbol/footprint/pin data against it and summarize any mismatches.

flux

Found an official TE Connectivity source for the apparent underlying part and added the Datasheet URL property; I’m now checking the symbol and footprint details against it.
Created a project doc

Part Datasheet Review: TE Connectivity 1-1761608-5

View Document
Date: 2026-07-17 | Field | Current project value / observed value | Datasheet / official source value | Result |

flux

Completed the part review and set the Datasheet URL to the official TE Connectivity digital datasheet for 1-1761608-5. I found no blocking symbol/footprint mismatch; only metadata refinements are recommended: terminal pin types are still Unspecified, per-pin descriptions are absent, and the drill size is within TE tolerance but near the upper limit.
Full details are in Part Datasheet Review.
Fix metadata and review
Set pin types
Add contact descriptions
Check footprint margins
Export part data
Sign up to send

Files

Pins

Symbol

Layout

Preview

15
Pin Number
15
13
Pin Number
13
4
Pin Number
4
29
Pin Number
29
2
Pin Number
2
28
Pin Number
28
25
Pin Number
25
38
Pin Number
38
18
Pin Number
18
36
Pin Number
36
8
Pin Number
8
21
Pin Number
21
45
Pin Number
45
19
Pin Number
19
3
Pin Number
3
20
Pin Number
20
23
Pin Number
23
40
Pin Number
40
9
Pin Number
9
41
Pin Number
41
5
Pin Number
5
17
Pin Number
17
49
Pin Number
49
12
Pin Number
12
31
Pin Number
31
10
Pin Number
10
24
Pin Number
24
7
Pin Number
7
33
Pin Number
33
50
Pin Number
50
46
Pin Number
46
37
Pin Number
37
30
Pin Number
30
43
Pin Number
43
26
Pin Number
26
27
Pin Number
27
6
Pin Number
6
44
Pin Number
44
22
Pin Number
22
39
Pin Number
39
16
Pin Number
16
47
Pin Number
47
42
Pin Number
42
1
Pin Number
1
32
Pin Number
32
35
Pin Number
35
34
Pin Number
34
48
Pin Number
48
11
Pin Number
11
14
Pin Number
14
Part Datasheet Review: TE Connectivity 1-1761608-5
Date: 2026-07-17
Reviewed Part Information

Table

FieldCurrent project value / observed valueDatasheet / official source valueResult
ManufacturerTE ConnectivityTE ConnectivityMatch
Manufacturer Part Number1-1761608-51-1761608-5Match
DescriptionConnector Header Through Hole 50 position 0.100" (2.54mm)Wire-to-Board, 50 Position, 2.54 mm [.1 in] Centerline, Vertical, Through Hole - Solder, 2 Row, Plug, Low Profile, AMP-LATCH / AMP-LATCH - NOVO ribbon cable connectorMatch; project description is shorter
Part TypeConnectorRibbon Cable Connector / Wire-to-Board Connector Assembly / Pin HeaderMatch
Designator PrefixJConnector/headerMatch
Datasheet URLhttps://www.te.com/en/product-1-1761608-5.datasheet.pdfOfficial TE Connectivity digital datasheetSet/verified
Footprint assetTYCO_1-1761608-5 with 1-1761608-5.stp modelTE drawing 1761608 / product page for 1-1761608-5Match
Symbol Styleparametric-v150 numbered connector contactsMatch
Official sources used:
Key Datasheet Specs

Table

SpecValue
SeriesAMP-LATCH / AMP-LATCH - NOVO
Connector systemWire-to-Board
Header typePin Header / Plug
Positions50
Rows2
Pitch / centerline2.54 mm [0.100 in]
Row spacing2.54 mm [0.100 in]
Mounting / terminationVertical, through-hole solder, board mount
ProfileLow profile
Mating retentionEjection latch, short / latch lock-eject hooks
Mating alignment / polarizationCenter alignment / center keying slot
Contact typeSquare pin, 0.64 mm [0.025 in]
Current rating1 A max per contact
Operating voltage250 VAC
Dielectric strength1000 Vrms
Insulation resistance5000 MΩ
Operating temperature-65 °C to +105 °C
HousingBlack PBT, UL 94V-0
ContactsPhosphor bronze
Contact platingGold flash mating area, nickel underplate, tin solder tail
PackagingTube
Footprint Cross-Check

Table

Footprint itemCurrent footprintDatasheet / customer drawingResult
Pad count50 through-hole pads50 positionsMatch
Row count2 rows2 rowsMatch
Pitch along row2.54 mm2.54 mmMatch
Row spacing2.54 mm2.54 mmMatch
Numbering patternOdd/even pairs across two rows; pad 1 rectangularPos #1 reference and two-row 2.54 mm gridMatch
Drill diameter0.9652 mmØ0.89 ± 0.08 mmWithin tolerance: max allowed 0.97 mm
Pad diameter1.4478 mmNot specified in extracted drawingNo mismatch; annular ring ≈0.24 mm
Overall outline length71.12 mm from footprint outlineB = 71.12 mm for 50-position partMatch
Body/outline width~9.144 mm9.19 mm / ~9.14 mm drawing widthMatch within rounding/source notation
3D model1-1761608-5.stpMPN-specific TE model referenceMatch
Notes:
  • The footprint includes the through-hole pattern and main connector body outline. No separate PCB latch/mounting holes are required because the datasheet lists PCB mount alignment/retention as "without".
  • The drill size is very close to the upper end of the recommended hole tolerance but still inside the TE customer drawing tolerance.
Symbol / Pin Cross-Check

Table

Symbol itemCurrent symbolDatasheet / drawingResult
Terminal count50 terminals50 contactsMatch
Pin numberingTerminals 1 through 50 presentPositions 1 through 50Match
Per-pin functionsNo signal-specific names; connector contacts onlyDatasheet defines numbered contacts, no unique signal functionsAcceptable
Pin type metadataEach terminal has Pin Type = UnspecifiedConnector contacts are passive signal contactsMetadata improvement recommended, not a mechanical/electrical mismatch
Pin descriptionsNot populated per terminalDatasheet does not assign unique functionsAcceptable; optional descriptions like "Contact 1" could improve clarity
Mismatches / Issues Flagged
  1. No blocking datasheet mismatch found. MPN, manufacturer, pin count, pitch, row count, vertical through-hole package, and footprint geometry all align with TE Connectivity 1-1761608-5.
  2. Terminal Pin Type is still Unspecified. For a connector library part, these could be set to Passive or Signal to improve ERC behavior and metadata quality.
  3. Per-pin descriptions are absent. This is acceptable because the datasheet defines generic numbered contacts rather than named signal functions, but adding descriptions such as Contact 1 ... Contact 50 would make the symbol clearer.
  4. Drill size is near the upper tolerance limit. Footprint drill is 0.9652 mm versus TE recommended Ø0.89 ± 0.08 mm; this is within tolerance but leaves little margin above the drawing maximum of 0.97 mm.
Review Conclusion
The part is consistent with TE Connectivity 1-1761608-5, a 50-position, 2-row, 2.54 mm pitch, vertical through-hole AMP-LATCH low-profile IDC header with short eject latches. The official TE digital datasheet URL is set, and the footprint/pin numbering match the official TE datasheet and customer drawing. Only metadata refinements are recommended for terminal pin type and optional per-contact descriptions.

  • Reviewed Part Information

  • Key Datasheet Specs

  • Footprint Cross-Check

  • Symbol / Pin Cross-Check

  • Mismatches / Issues Flagged

  • Review Conclusion