Part Datasheet Review
Thought for 6 sec
I’ll inspect the part metadata, look for an official datasheet if needed, then compare the symbol/footprint/pin data against it and summarize any mismatches.
Worked for 3 mins 50 sec
Found an official TE Connectivity source for the apparent underlying part and added the Datasheet URL property; I’m now checking the symbol and footprint details against it.
Worked for 10 mins 38 sec
Created a project doc
Part Datasheet Review: TE Connectivity 1-1761608-5
Date: 2026-07-17 | Field | Current project value / observed value | Datasheet / official source value | Result |
Completed the part review and set the Datasheet URL to the official TE Connectivity digital datasheet for 1-1761608-5. I found no blocking symbol/footprint mismatch; only metadata refinements are recommended: terminal pin types are still
Unspecified, per-pin descriptions are absent, and the drill size is within TE tolerance but near the upper limit.Full details are in Part Datasheet Review.
Fix metadata and review
Set pin types
Add contact descriptions
Check footprint margins
Export part data
Refine this doc
Ask about this doc
Part Datasheet Review: TE Connectivity 1-1761608-5
Date: 2026-07-17
Reviewed Part Information
Table
| Field | Current project value / observed value | Datasheet / official source value | Result |
|---|---|---|---|
| Manufacturer | TE Connectivity | TE Connectivity | Match |
| Manufacturer Part Number | 1-1761608-5 | 1-1761608-5 | Match |
| Description | Connector Header Through Hole 50 position 0.100" (2.54mm) | Wire-to-Board, 50 Position, 2.54 mm [.1 in] Centerline, Vertical, Through Hole - Solder, 2 Row, Plug, Low Profile, AMP-LATCH / AMP-LATCH - NOVO ribbon cable connector | Match; project description is shorter |
| Part Type | Connector | Ribbon Cable Connector / Wire-to-Board Connector Assembly / Pin Header | Match |
| Designator Prefix | J | Connector/header | Match |
| Datasheet URL | https://www.te.com/en/product-1-1761608-5.datasheet.pdf | Official TE Connectivity digital datasheet | Set/verified |
| Footprint asset | TYCO_1-1761608-5 with 1-1761608-5.stp model | TE drawing 1761608 / product page for 1-1761608-5 | Match |
| Symbol Style | parametric-v1 | 50 numbered connector contacts | Match |
Official sources used:
- TE digital datasheet: https://www.te.com/en/product-1-1761608-5.datasheet.pdf
- TE customer drawing: https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1761608&DocType=Customer%20Drawing&DocLang=English&DocFormat=pdf&PartCntxt=1-1761608-5
- TE product page: https://www.te.com/en/product-1-1761608-5.html
Key Datasheet Specs
Table
| Spec | Value |
|---|---|
| Series | AMP-LATCH / AMP-LATCH - NOVO |
| Connector system | Wire-to-Board |
| Header type | Pin Header / Plug |
| Positions | 50 |
| Rows | 2 |
| Pitch / centerline | 2.54 mm [0.100 in] |
| Row spacing | 2.54 mm [0.100 in] |
| Mounting / termination | Vertical, through-hole solder, board mount |
| Profile | Low profile |
| Mating retention | Ejection latch, short / latch lock-eject hooks |
| Mating alignment / polarization | Center alignment / center keying slot |
| Contact type | Square pin, 0.64 mm [0.025 in] |
| Current rating | 1 A max per contact |
| Operating voltage | 250 VAC |
| Dielectric strength | 1000 Vrms |
| Insulation resistance | 5000 MΩ |
| Operating temperature | -65 °C to +105 °C |
| Housing | Black PBT, UL 94V-0 |
| Contacts | Phosphor bronze |
| Contact plating | Gold flash mating area, nickel underplate, tin solder tail |
| Packaging | Tube |
Footprint Cross-Check
Table
| Footprint item | Current footprint | Datasheet / customer drawing | Result |
|---|---|---|---|
| Pad count | 50 through-hole pads | 50 positions | Match |
| Row count | 2 rows | 2 rows | Match |
| Pitch along row | 2.54 mm | 2.54 mm | Match |
| Row spacing | 2.54 mm | 2.54 mm | Match |
| Numbering pattern | Odd/even pairs across two rows; pad 1 rectangular | Pos #1 reference and two-row 2.54 mm grid | Match |
| Drill diameter | 0.9652 mm | Ø0.89 ± 0.08 mm | Within tolerance: max allowed 0.97 mm |
| Pad diameter | 1.4478 mm | Not specified in extracted drawing | No mismatch; annular ring ≈0.24 mm |
| Overall outline length | 71.12 mm from footprint outline | B = 71.12 mm for 50-position part | Match |
| Body/outline width | ~9.144 mm | 9.19 mm / ~9.14 mm drawing width | Match within rounding/source notation |
| 3D model | 1-1761608-5.stp | MPN-specific TE model reference | Match |
Notes:
- The footprint includes the through-hole pattern and main connector body outline. No separate PCB latch/mounting holes are required because the datasheet lists PCB mount alignment/retention as "without".
- The drill size is very close to the upper end of the recommended hole tolerance but still inside the TE customer drawing tolerance.
Symbol / Pin Cross-Check
Table
| Symbol item | Current symbol | Datasheet / drawing | Result |
|---|---|---|---|
| Terminal count | 50 terminals | 50 contacts | Match |
| Pin numbering | Terminals 1 through 50 present | Positions 1 through 50 | Match |
| Per-pin functions | No signal-specific names; connector contacts only | Datasheet defines numbered contacts, no unique signal functions | Acceptable |
| Pin type metadata | Each terminal has Pin Type = Unspecified | Connector contacts are passive signal contacts | Metadata improvement recommended, not a mechanical/electrical mismatch |
| Pin descriptions | Not populated per terminal | Datasheet does not assign unique functions | Acceptable; optional descriptions like "Contact 1" could improve clarity |
Mismatches / Issues Flagged
- No blocking datasheet mismatch found. MPN, manufacturer, pin count, pitch, row count, vertical through-hole package, and footprint geometry all align with TE Connectivity 1-1761608-5.
- Terminal Pin Type is still
Unspecified. For a connector library part, these could be set toPassiveorSignalto improve ERC behavior and metadata quality. - Per-pin descriptions are absent. This is acceptable because the datasheet defines generic numbered contacts rather than named signal functions, but adding descriptions such as
Contact 1...Contact 50would make the symbol clearer. - Drill size is near the upper tolerance limit. Footprint drill is 0.9652 mm versus TE recommended Ø0.89 ± 0.08 mm; this is within tolerance but leaves little margin above the drawing maximum of 0.97 mm.
Review Conclusion
The part is consistent with TE Connectivity 1-1761608-5, a 50-position, 2-row, 2.54 mm pitch, vertical through-hole AMP-LATCH low-profile IDC header with short eject latches. The official TE digital datasheet URL is set, and the footprint/pin numbering match the official TE datasheet and customer drawing. Only metadata refinements are recommended for terminal pin type and optional per-contact descriptions.
Reviewed Part Information
Key Datasheet Specs
Footprint Cross-Check
Symbol / Pin Cross-Check
Mismatches / Issues Flagged
Review Conclusion
