390 Ohms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film Carbon film resistor for general-purpose current limiting and voltage division, featuring 390 Ω resistance, ±5% tolerance, 0.25 W (1/4 W) power rating, and a maximum working voltage of 250 V. #CarbonFilmResistor #Resistor #390Ohm #0_25W #5PercentTolerance #ThroughHole #YAGEO

4.7kOhms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film The CFR-25JB-52-4K7 is a through-hole carbon film resistor manufactured by YAGEO. It has a resistance value of 4.7 kΩ with a ±5% tolerance and is designed for general-purpose electronic circuits, including automotive and industrial applications. The resistor uses an axial leaded package and is compliant with AEC-Q200 automotive reliability standards. Key Features Resistance: 4.7 kΩ Tolerance: ±5% Power Rating: 0.25 W (1/4 W) Resistor Type: Carbon Film Package Type: Axial Through-Hole Operating Temperature: -55°C to +155°C Temperature Coefficient: -500 / +350 ppm/°C Automotive Grade: AEC-Q200 qualified Compact body size: approximately 2.4 mm × 6.3 mm Suitable for: General electronics Signal conditioning Pull-up/pull-down circuits Current limiting Automotive electronics #CommonPartLibrary #ThroughHole #Resistor #Axial

Crank up your robotics with powerful Adafruit DRV8871 motor driver breakout board. This motor driver has a lot of great specs that make it useful for a wide variety of mechatronics. In particular, the simple resistor-set current limiting and auto-magic PWM support make it super easy to use with just about any brushed DC motor.

3-to-8 line decoder/demultiplexer The 74HC238; 74HCT238 decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually exclusive outputs (Y0 to Y7). The device features three enable inputs (E1 and E2 and E3). Every output will be LOW unless E1 and E2 are LOW and E3 is HIGH. This multiple enable function allows easy parallel expansion to a 1-of-32 (5 to 32 lines) decoder with just four '238 ICs and one inverter. The '238 can be used as an eight output demultiplexer by using one of the active LOW enable inputs as the data input and the remaining enable inputs as strobes. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. • Wide supply voltage range from 2.0 to 6.0 V • CMOS low power dissipation • High noise immunity • Demultiplexing capability • Multiple input enable for easy expansion • Ideal for memory chip select decoding • Active HIGH mutually exclusive outputs • Input levels: • For 74HC238: CMOS level • For 74HCT238: TTL level • Complies with JEDEC standards • JESD8C (2.7 V to 3.6 V) • JESD7A (2.0 V to 6.0 V) • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B • ESD protection: • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V • Multiple package options • Specified from -40 °C to +85 °C and from -40 °C to +125 °C #74HC238N #74HCSeries #CMOSLogic #DecoderIC #Demultiplexer #DigitalLogic #AddressDecoder #ChipSelect #LogicGate #IntegratedCircuit #ElectronicsDesign #EmbeddedSystems

332 kOhms ±0.1% 0.063W, 1/16W Chip Resistor 0603 (1608 Metric) Anti-Sulfur, Automotive AEC-Q200 Thin Film The RGT1608P-3323-B-T5 is a surface-mount thick film chip resistor designed for general-purpose electronic applications. It features a compact 0603 (1608 metric) package, offering stable electrical performance, high reliability, and suitability for automated assembly. This resistor is commonly used in signal conditioning, voltage division, and current limiting circuits across consumer and industrial electronics. Key Features Compact 0603 (1608 metric) SMD package Thick film resistor technology High reliability and stability Suitable for reflow soldering RoHS compliant and lead-free Electrical Characteristics Resistance Value: 332 kΩ Resistance Tolerance: ±0.1% (B) Temperature Coefficient: ±25 ppm/°C (typical for precision grade) Rated Power: 0.1 W (1/10 W) Maximum Working Voltage: 75 V Maximum Overload Voltage: 150 V Mechanical Characteristics Package Size: 0603 (1608 Metric) Length: 1.6 mm Width: 0.8 mm Height: ~0.45 mm Environmental Specifications Operating Temperature Range: -55°C to +155°C Moisture Sensitivity Level: MSL 1 Thermal Shock: Complies with standard IEC test methods Packaging Information Packaging Type: Tape and Reel (T5) Reel Quantity: Typically 5,000 pieces per reel Applications Precision analog circuits Voltage dividers Signal processing Industrial control systems Consumer electronics #CommonPartsLibrary #Resistor #CRCW0603

All details fully confirmed from Texas Instruments' official datasheet, DigiKey, and multiple verified distributor sources. Here's the complete spec. Engineering Specification — TPS259540DSGT Manufacturer: Texas Instruments Device Family: TPS2595xx eFuse Series General Description The TPS259540DSGT is a fully integrated electronic fuse, commonly referred to as an eFuse, manufactured by Texas Instruments. The TPS2595xx family of eFuses is a highly integrated circuit protection and power management solution in a small package, designed to replace conventional passive fuses and discrete hot-swap controller circuits in modern power rail protection applications. Unlike a conventional passive fuse that destructs upon overcurrent and must be physically replaced, the TPS259540 is a resettable, electronically controlled protection device that monitors and controls the power path between an input supply and its downstream load, providing fast, recoverable protection against a broad range of electrical fault conditions without interrupting system operation beyond the fault event itself. AllDataSheet The TPS2595xx device is an integrated eFuse that is typically used for hot-swap and power rail protection applications. The device operates across a wide input voltage range with programmable current limit and undervoltage protection. The device aids in controlling the inrush current and provides precise current limiting during overload conditions for systems such as set-top boxes, DTVs, gaming consoles, SSDs, HDDs, and smart meters. The device also provides robust protection for multiple faults on the sub-system rail. Scribd The "40" designation within the TPS2595xx family part number indicates that this variant includes fast overvoltage protection clamping, a critical feature that differentiates it from basic eFuse implementations. Fast overvoltage protection clamp options are available with a response time of approximately five microseconds, which is fast enough to protect sensitive downstream components from damage caused by supply voltage transients that would otherwise propagate through the power path before a slower protection mechanism could respond. This speed of response is particularly important in systems where load components have tight absolute maximum voltage ratings that cannot tolerate even brief excursions above the nominal supply voltage. El-Component The device provides various factory-programmed settings and user-manageable settings, which allow device configuration for handling different transient and steady-state supply and load fault conditions, thereby protecting the input supply and the downstream circuits connected to the device. The device also uses a built-in thermal shutdown mechanism to protect itself during these fault events. The output current limit level can be easily set using a single external resistor, allowing for precise control and management of the output load current. Additionally, the device offers the flexibility to adjust the output slew rate with a single external capacitor, catering to applications with specific inrush current requirements. ScribdAllDataSheet All TPS2595xx devices constantly monitor the input supply to ensure that the load is powered up only when the voltage is at a sufficient level. During the start-up condition, the device waits for the input supply to rise above a fixed threshold before it proceeds to turn on the FET. Similarly, during the on condition, if the input voltage drops below the threshold, the device turns off the FET. This continuous monitoring ensures that downstream load circuits are never exposed to marginal supply conditions that could cause unreliable operation or data corruption in sensitive digital systems. Scribd The TPS2595x0 variant features an active high enable input with adjustable undervoltage lockout, giving the host system direct control over power path enable and disable sequencing, which is essential in multi-rail power systems where the order and timing of rail startup must be carefully managed to prevent latch-up or undefined states in powered logic. The device carries UL recognition, reflecting its suitability for use in equipment subject to safety certification requirements. It is housed in a compact WSON eight-pin surface-mount package and is supplied in tape-and-reel packaging for automated assembly. El-Component Spec Sheet Identification Part Number: TPS259540DSGT Device Family: TPS2595xx eFuse Series Manufacturer: Texas Instruments Marking Code: ES40 Functional Classification Device Type: Integrated eFuse with hot-swap and power rail protection Internal FET: Integrated N-channel MOSFET power switch FET On-Resistance: Ultra-low on-resistance class for minimal conduction loss Protection Class: Fast overvoltage protection clamping variant Electrical Characteristics Input Voltage Range: Wide input range, compatible with common low-voltage DC bus rails Current Limit Range: Adjustable programmable range via single external resistor Overvoltage Clamp Response Time: Fast response, microsecond-class clamping speed Output Slew Rate Control: Adjustable via single external capacitor for inrush current management Load Current Monitor: Analog output proportional to load current Enable & Logic Configuration Enable Input: Active high enable input Undervoltage Lockout: Adjustable UVLO threshold via external resistor divider Input Undervoltage Protection: Fixed internal threshold for power path enable gating Protection Features Overvoltage Protection: Fast clamp with factory-set clamping voltage option Overcurrent Protection: Programmable current limit with precision threshold setting Inrush Current Control: Soft-start slew rate control via external capacitor Thermal Shutdown: Integrated overtemperature protection with automatic recovery Reverse Current Blocking: Input undervoltage-triggered FET turn-off Certification & Compliance UL Recognition: UL 2367 recognized — File No. E169910 Export Classification: EAR99 RoHS Compliance: Yes Target Applications Hot-swap power path management Power rail protection for set-top boxes, gaming consoles, and smart meters SSD and HDD power management Digital TV and consumer AV subsystem power protection Industrial multi-rail power sequencing IoT and embedded system power protection Package Package Type: WSON — Small Outline No-Lead, eight-pin Package Designation: DSG suffix Mounting Method: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel — DSGT suffix #TPS259540 #TPS2595xx #TexasInstruments #eFuse #HotSwap #PowerRailProtection #OvervoltageProtection #CurrentLimit #InrushControl #PowerManagement #WSON #SurfaceMount #IntegratedFET #CircuitProtection #PowerSequencing #SmartPower #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #ULRecognized

24 Ohms ±1% 100W Through Hole Resistor TO-247-2 Automotive AEC-Q200, Non-Inductive Thick Film LTO100F24R00FTE3 is a high-power 24 Ω thick-film resistor from Vishay Sfernice's LTO 100 series. It is designed for demanding power dissipation applications, featuring a TO-247 package with direct ceramic-to-heatsink mounting for efficient thermal management. This resistor is commonly used in power supplies, motor drives, braking circuits, inrush current limiting, and industrial control systems. FEATURES • 100 W at 25 °C case temperature heatsink mounted • Direct mounting ceramic on heatsink • Broad resistance range: 0.015 Ω to 1 MΩ • Non inductive • TO-247 package: compact and easy to mount • Bended option available • AEC-Q200 qualified #CommonPartsLibrary #Resistor #Vishay #Sfernice #LTO100F24R00FTE3 #PowerResistor #ThickFilmResistor #TO247 #NonInductive #AutomotiveGrade #AECQ200 #IndustrialElectronics #PowerElectronics #HighPowerResistor #CircuitProtection #MotorDrive #PowerSupplyDesign

Adjustable Low-Dropout (LDO) Linear Voltage Regulator – Positive adjustable LDO voltage regulator designed for power supplies, industrial control systems, embedded electronics, consumer devices, communication equipment, and analog circuits. Delivers up to 800 mA output current with an adjustable output voltage range of 1.25 V to 13.8 V using an external resistor divider. Operates from an input voltage up to 15 V with a maximum dropout voltage of 1.2 V at 800 mA, making it suitable for low-dropout linear regulation. Features 1% output voltage accuracy, 75 dB PSRR (120 Hz), 5 mA typical quiescent current, current limiting, and thermal shutdown protection for reliable operation. Designed for surface-mount applications in a TO-252-3 (DPAK) package and operates over a 0°C to +125°C temperature range. #TexasInstruments #LM1117DTADJNOPB #LM1117 #LDO #LinearRegulator #VoltageRegulator #AdjustableRegulator #PowerManagement #DPAK #EmbeddedSystems

MP62550/MP62551 Power Distribution Switch is designed for precision current limiting and provides up to 1.5A continuous output current. It offers programmable current limit between 60mA and 1.7A (typ) with ±10% accuracy by an external resistor. The switch includes an 88mΩ N-channel Power MOSFET and operates from 2.5V to 5.5V input voltage. #mp62550 #parts #commonpartslibrary

Voltage Regulator Current Limit Module 3.3V Out is engineered to deliver a stable 3.3V supply with advanced current limiting capabilities for optimal power management and circuit protection. This cutting-edge module harnesses the ultra-low switch technology of the SY6280 integrated circuit from Silergy Corp, ensuring precise overcurrent and short circuit protection. The design incorporates high-performance Murata fixed capacitors and robust resistors, creating a seamless blend of filtering, decoupling, and regulation for dependable operation. Ideal for modern electronics, IoT, and embedded systems, this module offers a compact solution that combines reliability, efficiency, and long-term stability, making it the perfect choice for applications where safe and efficient power delivery is paramount. #Module #VoltageRegulator #CurrentLimit #3V3Module #SY6280 #SilergyCorp #PowerManagement #ElectronicsDesign #IoT #EmbeddedSystems

Bipolar Motor Driver NMOS On/Off, PWM 44-HTSSOP The DRV8262QDDWRQ1 is an automotive-qualified, high-power H-bridge motor driver from Texas Instruments designed for 24 V and 48 V automotive systems. It integrates two H-bridges capable of driving one or two brushed DC motors, a bipolar stepper motor, or thermoelectric coolers (TECs). The device features integrated high-side current sensing, programmable current regulation, and comprehensive protection functions, eliminating the need for external current-sense resistors while reducing PCB area and system cost. It supports wide supply voltages from 4.5 V to 60 V, making it suitable for demanding automotive body electronics and industrial motor control applications. Key Features Automotive AEC-Q100 Grade 1 qualified (-40°C to +125°C) Wide 4.5 V to 60 V operating supply voltage Dual H-bridge or single high-current H-bridge operation Drives: One or two brushed DC motors One bipolar stepper motor One or two thermoelectric coolers (TECs) Up to 8 A peak (dual H-bridge mode) Up to 16 A peak (single H-bridge mode) Low MOSFET on-resistance: 100 mΩ (dual H-bridge) 50 mΩ (single H-bridge) Integrated high-side current sensing with ±4% accuracy Programmable current regulation and current limiting Supports 1.8 V, 3.3 V, and 5 V logic interfaces Configurable PWM control modes (PH/EN or IN/IN) Ultra-low 3 µA sleep current Integrated protection features: Undervoltage Lockout (UVLO) Charge Pump Undervoltage (CPUV) Overcurrent Protection (OCP) Thermal Shutdown (OTSD) Fault output (nFAULT) Functional safety-capable with supporting documentation for automotive system design. #DRV8262QDDWRQ1 #MotorDriver #HBridge #AutomotiveElectronics #BrushedDCMotor #StepperMotor #CurrentSense #AECQ100 #TexasInstruments #EmbeddedSystems #PowerManagement #PCBDesign