NTC Thermistor 0603 (1608 Metric) Template NO default properties #simplifiedFootprint #noProp #commonpartslibrary #ntc #thermistor #sensor #temperature #transducer

1.5A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC with 4.2 VBAT The BQ24075TRGTR (from Texas Instruments) is a highly integrated single-cell Li-Ion / Li-Polymer linear battery charger IC with power-path management. It is designed for portable and space-constrained applications, allowing a device to be powered from a USB port or AC adapter while simultaneously charging the battery. The device integrates charging control, power-path management, and safety features into a compact package. A key feature is its Dynamic Power Path Management (DPPM), which ensures the system is powered even when the battery is low or absent, while intelligently managing charging current. Key Features Battery Charging Supports single-cell Li-Ion / Li-Polymer batteries Up to 1.5 A programmable charge current Three-phase charging: Pre-charge (conditioning) Constant current Constant voltage Fixed 4.2 V charge voltage Power Path Management Dynamic Power Path Management (DPPM): Powers system and charges battery simultaneously Prioritizes system load over charging Allows system operation even with: Deeply discharged battery No battery connected Input & Power Features Operates from: USB input (100 mA / 500 mA selectable) AC adapter Programmable input current limit up to 1.5 A Input voltage range: ~4.35 V to 6.4 V (28 V max rating) Input dynamic power management (VIN-DPM) prevents source overload Protection & Safety Thermal regulation and shutdown Over-voltage protection (OVP) Short-circuit and reverse current protection Battery temperature monitoring (NTC thermistor input) Battery disconnect (SYSOFF) feature Control & Status Standalone operation (no MCU required, resistor-programmable) Charge status outputs: Charging Charge complete Power good Physical Characteristics Package: 16-pin VQFN (3 mm × 3 mm) Operating temperature: –40°C to +85°C #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

Thermistor NTC 100K Ohm 5% 2-Pin 0805 Surface Mount Solder Pad 4150K T/R

NTC Thermistor 10k 3570K 0805 (2012 Metric) #commonpartslibrary #ntc #thermistor

NTC Thermistor 10k 0402 (1005 Metric) #CommonPartsLibrary #Sensor #Temperature-sensor #Transducer #Thermistor

NTC Thermistor 10k Disc, 4.5mm Dia x 4.5mm W #commonpartslibrary #thermistor

NTC Thermistor 10k 0603 (1608 Metric) NTC Thermistor 10k 0603 (1608 Metric)

Stand-alone single-cell linear battery charger with power path BQ24074RGTT is a highly integrated standalone linear charger and power-path management IC from Texas Instruments designed for single-cell Li-Ion/Li-Polymer battery-powered portable devices. It supports charging directly from USB ports or external adapters while simultaneously powering the system load through integrated Dynamic Power Path Management (DPPM). The device is commonly used in portable electronics, IoT devices, wireless accessories, handheld medical devices, and battery-powered embedded systems. Key Features Single-cell Li-Ion/Li-Polymer battery charger Up to 1.5 A programmable charge current Integrated Dynamic Power Path Management (DPPM) USB-compliant charging support Selectable 100 mA / 500 mA USB current limits Programmable input current limit up to 1.5 A Supports both USB input and wall adapters Input overvoltage protection up to 28 V absolute maximum Integrated thermal regulation and thermal shutdown Reverse-current and short-circuit protection Programmable pre-charge and fast-charge safety timers Battery temperature monitoring via NTC thermistor input Charge status outputs for charging/done indication Current monitoring output (ISET) Compact 16-pin VQFN (3×3 mm) package Wide operating temperature range suitable for industrial applications Typical Applications TWS charging cases and earbuds Portable medical devices IoT and asset tracking systems Handheld gaming accessories Video doorbells and IP cameras Portable embedded systems and development boards Important Design Notes Designed specifically for 1-cell battery applications Requires proper thermal PCB layout due to linear charging architecture DPPM allows the system to operate even with a deeply discharged or missing battery Recommended for compact designs needing integrated charging and system power-path control #CommonPartsLibrary #IntegratedCircuit #PowerManagement

10KF3950 is an NTC (Negative Temperature Coefficient) thermistor with a nominal resistance of 10 kΩ at 25°C and a B-value of 3950 K. Its resistance decreases as temperature increases, making it suitable for temperature sensing, compensation, monitoring, and control applications in electronic circuits. It is commonly available in compact SMD packages such as 0402, 0603, and 0805. Key Features Resistance at 25°C: 10 kΩ B Constant (25/50°C): 3950 K ±1% Resistance Tolerance: ±1% Operating Temperature Range: -40°C to +125°C Rated Power: 100 mW Fast thermal response due to small chip size High sensitivity to temperature changes RoHS compliant Available in 0402, 0603, and 0805 SMD packages for space-constrained designs Typical Applications Battery pack temperature monitoring Power supply thermal protection Consumer electronics Industrial control systems Automotive electronics HVAC equipment Smart home devices Temperature compensation circuits #CommonPartsLibrary #thermistor #NTC

The NTC5D-15 is a negative temperature coefficient thermistor designed for inrush current limiting and surge current suppression in power electronic circuits. It provides high resistance at ambient temperature to restrict excessive startup current and gradually decreases in resistance as it self-heats during operation, allowing normal current flow with minimal power loss. This component is commonly used in switched-mode power supplies, battery chargers, motor drives, lighting equipment, consumer electronics, industrial control systems, and other AC or DC power applications requiring reliable inrush current protection. Key Features Negative temperature coefficient thermistor technology Designed for inrush current limiting applications High surge current handling capability Low resistance during normal operating conditions Fast thermal response characteristics Stable electrical performance over repeated power cycles High reliability and long operational life Radial leaded through-hole package Suitable for AC and DC power systems Helps protect power supplies, rectifiers, capacitors, and switching devices from excessive startup current Electrical Characteristics NTC thermistor element Inrush current limiter function Low steady-state resistance after self-heating High energy absorption capability Wide operating temperature range Stable resistance-temperature behavior Suitable for continuous current operation within specified ratings Applications Switched-mode power supplies AC-DC converters Battery charging systems LED drivers and lighting equipment Industrial automation systems Motor control circuits Consumer electronics Home appliances Telecommunications equipment Power distribution modules Mechanical Characteristics Radial lead configuration Through-hole mounting Epoxy-coated thermistor body Compact package size for PCB installation RoHS-compliant construction depending on manufacturer version #commonpartslibrary #passivecomponent #thermistor #ntc #inrushcurrentlimiter #surgeprotection #powermanagement #powersupply #circuitprotection #industrialelectronics #powerelectronics #electroniccomponent