Sublayout for the ME6211C33M5G-N only in 8mm x 10mm, using 1206 Capcitors.

Sublayout for the ME6211C33M5G-N only in 8mm x 10mm.

LDO Regulator 500mA 3.3V SOT223-3 Microchip MCP1825S-3302E/DB, LDO Voltage Regulator, 0.5A, 3.3 V +/-0.5%, 2.1 6 Vin, 4-Pin SOT-223 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-regulator #LDO #MCP1825

133MHz LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHS RP2040 The RP2040 is a high-performance, low-cost 32-bit microcontroller developed by Raspberry Pi Ltd.. It features dual ARM Cortex-M0+ processor cores, flexible digital interfaces, and a unique Programmable I/O (PIO) subsystem that enables custom hardware protocols and timing-critical applications. The device is widely used in embedded systems, IoT devices, robotics, industrial control, consumer electronics, and educational projects. Key Features Dual ARM Cortex-M0+ CPU cores operating up to 133 MHz (up to 200 MHz under specific conditions) 264 KB on-chip SRAM organized in six independent memory banks External QSPI Flash interface with Execute-In-Place (XIP) support and up to 16 MB Flash memory capability 30 multifunction GPIO pins with extensive peripheral multiplexing 2 × UART interfaces 2 × SPI controllers 2 × I²C controllers 16 PWM channels for motor control and signal generation USB 1.1 Host and Device support with integrated PHY 12-bit ADC with four external analog inputs and internal temperature sensor, up to 500 ksps sampling rate 12-channel DMA controller for efficient data transfers Programmable I/O (PIO) subsystem with 8 state machines for implementing custom communication interfaces and precise timing applications Integrated PLLs and programmable LDO regulator for clock and power management Operating voltage range: 1.8 V to 3.3 V Available in a compact 7 mm × 7 mm QFN-56 package Typical Applications IoT and connected devices Industrial automation Robotics and motor control Human-machine interfaces (HMI) Consumer electronics USB peripherals Sensor data acquisition systems Educational and maker projects Custom communication protocol implementations using PIO #CommonPartsLibrary #IntegratedCircuit #Microcontroller

LDO Regulator Pos 3.3V 1A 4-Pin(3+Tab) SOT-223 T/R #commonpartslibrary #integratedcircuit #powermanagement #voltageregulator

6 to 50 V, Triple half-bridge gate driver with programmable currents and SPI configuration Motor Driver NMOS SPI 48-VFQFPN (6x6) STDRIVE102BP is a highly integrated triple half-bridge gate driver designed for driving 3-phase brushless DC (BLDC) motors. It can control six external N-channel MOSFETs with programmable gate drive currents, enabling optimized switching performance and reduced EMI. The device features SPI-configurable settings, integrated charge pump circuitry for 100% high-side duty-cycle operation, built-in voltage regulators, programmable analog front-end blocks, and comprehensive protection mechanisms, making it suitable for battery-powered motor control applications such as power tools, vacuum cleaners, e-bikes, robotics, and industrial automation. Key Features Triple half-bridge gate driver for 3-phase BLDC motor control Operating supply voltage range: 6 V to 50 V Programmable gate drive capability up to: 1 A source current 2 A sink current Integrated charge pump supporting 100% high-side duty cycle Embedded 12 V LDO regulator for gate-drive circuitry Embedded 3.3 V LDO regulator for low-voltage circuitry SPI-configurable parameters and diagnostic functions Up to three programmable-gain amplifiers (PGAs) Up to three high-speed comparators VDS monitoring for MOSFET protection Thermal shutdown protection Undervoltage lockout (UVLO) protection Dual control modes (ENx/INx or INHx/INLx) TTL-compatible logic inputs up to 5 V Ultra-low standby current consumption (<50 nA) Matched propagation delay across all channels #CommonPartsLibrary #IntegratedCircuit #STDRIVE102BP #STMicroelectronics #GateDriver #BLDCMotor #MotorControl #ThreePhaseMotor #MOSFETDriver #PowerTools #Robotics #IndustrialAutomation #EBike #SPI #BrushlessMotor #EmbeddedSystems #PowerElectronics

Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-223-5 Linear Voltage Regulator (LDO) providing a fixed 3.3 V output with up to 500 mA output current from an input voltage range of 2.3 V to 6.0 V. It features low dropout voltage, stable operation with ceramic output capacitors, current limiting, short-circuit protection, and overtemperature protection, making it suitable for low-voltage power regulation applications. #LDO #LinearVoltageRegulator #FixedOutput #3V3 #500mA #LowDropout #PowerManagement #Microchip

LD1117 Series 1300mA 5V Fixed Output Positive Voltage LDO Regulator - SOT-223 #Commonpartslibrary #Integratedcircuit #Powermanagement #Linearregulator #Voltageregulator

Fixed Positive LDO Regulator 3.3V Dropout PSSO3 TO-263-3 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

Linear Voltage Regulator IC Positive Fixed 1 Output 1A SOT-89-3 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-Regulator #LDO #Regulator #AZ1117C

FIXED POSITIVE LDO REGULATOR 3.3V DROPOUT PDSO4 SOT-223 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

Adjustable Positive LDO Regulator, 1.25V to 25V Max 0.6V Dropout BIPolar TO-220-5 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

LDO Regulator Neg -3.8V to -19.3V 0.5A Automotive TO-220-5 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

Linear Voltage Regulator IC Positive Fixed 1 Output 1A SOT-89-3 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-Regulator #LDO #Regulator

Linear Voltage Regulator IC Positive Fixed 1 Output 150mA SOT23R #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-Regulator #Linear #LDO #Regulator #AP7313

Linear Voltage Regulator IC Positive Fixed 1 Output 300mA SOT23R #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-Regulator #Linear #LDO #Regulator #AP7333

IC REG LDO ADJ 30MA LDO Regulator Positive 1.24V to 28V 0.03A SOT-23-5 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

Linear Voltage Regulator IC Positive Fixed 1 Output 1A SOT-89-3 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-Regulator #LDO #Regulator

Linear Voltage Regulator IC Positive Fixed 1 Output 300mA SOT23R #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-Regulator #Linear #LDO #Regulator #AP7333

2A, Low-Dropout Voltage Regulator, 1.425-6.5V Input, Adjustable Min 0.5V Output, PowerPad SO-8 ldo regulator voltage linear TI*SO*PowerPAD*

Buck Switching Regulator IC 0.5V~1.5V 1 Output 7A WLCSP-20 The RK860-2 is a low-dropout (LDO) linear voltage regulator IC designed to provide a stable, low-noise output voltage from a higher input supply. It is commonly used in small electronic modules, microcontroller power rails, and low-power analog/digital circuits where clean voltage regulation is important. Type: Low Dropout Linear Regulator (LDO) Input voltage: Typically up to ~6V (varies by variant) Output voltage: Fixed or adjustable (depends on suffix version) Dropout voltage: Low (suitable for battery-powered systems) Output current: ~300 mA to 600 mA class (package dependent) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #RK860

Low-Noise Low-Dropout (LDO) Voltage Regulator – Fixed 3.0 V positive-output LDO regulator providing up to 300 mA output current for low-noise power regulation. Operates from a 1.6 V to 6.0 V input voltage, features 140 mV maximum dropout voltage at 300 mA, 15 µA typical quiescent current, 65 dB to 40 dB PSRR (100 Hz to 1 MHz), and an enable input for power management. Includes overcurrent protection, thermal shutdown, and undervoltage lockout (UVLO). Specified for an operating junction temperature range of −40°C to +125°C and housed in a 5-pin SOT-23 (DBV) package. #TexasInstruments #TPS7A2030PDBVR #LDO #VoltageRegulator #LowDropout #300mA #3V #LowNoise #PowerManagement #SOT23 #EmbeddedSystems #PMIC

300mA 2V to 5.5V 500nA IQ Step-Down Converter with 300nA IQ 2V to 5.5V 100mA LDO Regulator in CSP-12 (1.2mmx1.6mm) #ultralibrarian

300mA, Low Noise, Linear Regulator with output active discharge function, 1.7-5.5V input voltage range, 1.2V fixed positive output, TSOT-23-5 linear regulator ldo fixed positive TSOT?23*

Low Quiescent Current LDO Regulator, 3.3V, 250mA, Vin<=16V, SOT-23 REGULATOR LDO SOT?23*