A buck boost converter that can be powered from a Li-Ion battery and output 3.3V @ 500mA. Powered by the TPS63051YFFR and in the same package as a standard Adafruit buck converter. Expect to squeeze around 5-10% SoC from a typical Li-Ion battery. Input Voltage Range: 2.5V to 5.5V Assembled at pcbway.com

This project is a DC-DC Buck converter based on the LM2596 IC. It is designed to step down the input voltage from 12V to a regulated output of 5V #Buck #LM2596 #project

Build your own Modular LED Sign! This design prioritizes accessibility which means that the BoM can be ordered on Amazon and that everything was designed with solder-ability in mind. NOTE: This board is still an unfinished prototype that has not been built and verified. Operating Instructions: 1. [Important!] Power your buck converter and adjust the output voltage to 1.5V output before attempting to power the LEDs. If you cannot power the buck converter, just turn the potentiometer counterclockwise to its maximum setting.

IMPORTANT NOTICE: Hey, I opened editing permissions and this doc is broken, see the frozen version here: https://www.flux.ai/markwuflux/on-air-markwu2001-remix-r1-backup-freeze-0b49 R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

This project is designed to measure water level of two tanks using ultrasonic sensors interfaced with the ESP32 microcontroller. The design leverages the processing power and wireless connectivity of the ESP32 to accurately monitor water levels and support automated water management processes. Key components include two ultrasonic sensors for precise distance measurement, robust voltage regulation using an LM2596 buck converter, and reliable power management circuits. Its modular design approach facilitates easy expansion and integration with other systems, making it an ideal solution for both DIY enthusiasts and professionals in automated fluid control and IoT applications. #ESP32 #UltrasonicSensor #WaterLevelSensor #LM2596 #VoltageRegulator #ModularDesign #IoT #DIYProjects #ElectronicsDesign #automation

Buck converter from 5V to 3.75V without dedicated IC

This project appears to be a power supply circuit using the TPS54331 step-down (Buck) converter from Texas Instruments. The target output voltage is 3.3V. It also features electromagnetic interference (EMI) mitigation components such as an inductor, capacitors and a diode. An LED is included for indication purposes. #Buck #TPS54331 #project

LM2596 Buck Converter DC to DC Converter High Efficiency Voltage Regulator 3.0-40V to 1.5-35V Buck Converter Adjustable Power Supply Module #part #LM2596

Welcome to your new project. Imagine what you can build here.

A Buck converter that can be power by Li-ion Battery and output 3.3 volt and 500mA Power by the TPS63051YFFR and the same package as a In the same as a Package as a standard dafruit buck converter. input Voltage Range : 3.3 v to 5.5 v

A buck boost converter that can be powered from a Li-Ion battery and output 3.3V @ 500mA. Powered by the TPS63051YFFR and in the same package as a standard adafruit buck converter . Input Voltage range : 2.5V to 5.5V

Lethal Company Pro Flashlight Broken Features: - U2M cannot be line powered from this circuit so the LED driver does not regulate. [Find the acompanying button board here](https://www.flux.ai/markwuflux/lethal-company-pro-flashlight-button-board) -Ultra bright -Makes click noise from speaker -Wirelessly transmits battery life (maybe use Ubo to receive this) -Drive a SST-40 Chinese LED I want this thing to be super bright! The brighter the better, but keep it simple. These LEDs will draw a lot of power, so we need some sort of CC source. It doesn't have to have high bandwidth. I am thinking about a DIY microcontroller buck converter with PID duty cycle control. Mistakes in this V1 design: - No pullup resistor on PG of Module1

This project is a DC-DC Buck converter based on the LM2596 IC. It is designed to step down the input voltage from 12V to a regulated output of 5V #Buck #LM2596 #project

R2 w Thread changes: -Moving to Letter Modules for ease of design -Adding MGM210L for Matter on Thread On/Off and intensity control -Shifted A and R letters closer to fix Kerning -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template #arduino-matter

This is a reference design of a buck converter based on LTC3406 with 1.2V 0.6A output #referenceDesign #powermanagement #analogdevices #template

24–30 V to 12 V / 100 W Single-Layer Synchronous Buck Converter with Robust Protection

R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

This is a reference design of a buck converter based on LTC3406 with 1.2V 0.6A output #referenceDesign #powermanagement #analogdevices #template #reference-design #polygon

Welcome to your new project. Imagine what you can build here.

MP1584-Based 3.3 V/3 A Buck Converter with Integrated ESP32-WROOM-32E and Dual-Row Expansion Headers

Buck converter , input voltage range 2.5v-5v

Abukc onverter in the same package as a standar Adafruit buck civerter Input Voltage Range:2.5V to 5.5V

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

This is a voltage regulator steps down a DC of up to 40V to 3.3V current 3A

This is a voltage regulator. It steps down an input DC voltage of up to 40V to a stable output voltage of 3.3V with a maximum output current of 3A.

Welcome to your new project. Imagine what you can build here.

Buck converter

LM2596 Buck Converter DC to DC Converter High Efficiency Voltage Regulator 3.0-40V to 1.5-35V Buck Converter Adjustable Power Supply Module #part #LM2596

LM2596 Buck Converter DC to DC Converter High Efficiency Voltage Regulator 3.0-40V to 1.5-35V Buck Converter Adjustable Power Supply Module #part #LM2596

DC Power Supply Voltage Regulator Buck Converter 8A/100W https://www.amazon.com/DROK-90483-Voltage-Regulator-Converter/dp/B00C4QVTNU/

This project is a DC-DC Buck converter based on the LM2596 IC. It is designed to step down the input voltage from 12V to a regulated output of 5V #Buck #LM2596 #project

Buck Converter Module with 5 V Output and Power-Present Indicator

Your power supply problems just got SUPER SOLVED! This 3.3V Buck Converter Breakout board is great for supplying power to low voltage circuits from a single Li-Ion cell battery or USB power. This chip provides up to 600-mA load current across the entire input voltage range of 3.5 to 5.5V.

LM3671 3.3V Buck Converter Breakout - 3.3V Output 600mA Max. Your power supply problems just got SUPER SOLVED! This 3.3V Buck Converter Breakout board is great for supplying power to low voltage circuits from a single Li-Ion cell battery or USB power. This chip provides up to 600-mA load current across the entire input voltage range of 3.5 to 5.5V. Great for your portable project, we made this "pin compatible" with the LM1117-3.3V TO-220 chip so you can swap it in for better performance (90-95% efficiency!) There's also an ENable pin, tie it low to shut down the output completely.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Voltage regulator

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

A raspberry pi project

Welcome to your new project. Imagine what you can build here.