JST PH Connector Header Through Hole 2-pin 0.079" (2.00mm) battery connector JST PH 2 pin The B2B-PH-K-S is a 2-position vertical header connector with a 2.0 mm pitch, designed for mating with JST PH series crimp housings (e.g., PHR-2). It is commonly used in consumer electronics, battery connections, and small embedded systems due to its compact size and secure locking mechanism. Key Features Series: JST PH Series Number of Pins: 2 Pitch: 2.0 mm Mounting Type: Through-hole (vertical) Contact Type: Male pin header Mating Type: Friction lock (secure connection) Current Rating: ~2 A (typical, depends on wire and conditions) Voltage Rating: ~100 V Contact Material: Copper alloy (tin-plated) Housing Material: UL94V-0 rated plastic (flame-retardant) Operating Temperature: Typically -25°C to +85°C Typical Applications Battery connectors (Li-ion/LiPo packs) Power supply connections in small devices Embedded systems (e.g., Arduino, sensors) Consumer electronics (fans, LEDs, small appliances) #CommonPartsLibrary #Connector #Header #JST-PH

XIAO nRF52840 Breakout with Centered Accelerometer, Precision Mounting Holes, and Additional Battery Connector

Power Connectors RoHS Battery Connector — High-current polarized power connector designed for secure DC power connections. The XT90PB-F.G.Y features a female bullet terminal configuration with a rated voltage of 500V DC and rated current of 90A, suitable for power connection applications requiring high current handling. #Connector #PowerConnector #BatteryConnector #DCConnector #XT90 #Amass #PCBComponent #CommonPartsLibrary #plug #XT90PB

Battery Retainer Coin, 16.0mm 1 Cell SMD (SMT) Tab #CommonPartsLibrary #Connector #battery holder

ESP32-WROOM32 ESP32 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® Smart 4.x Low Energy (BLE) Transceiver 2.4GHz Evaluation Board ESP32-POE is an ESP32-based IoT development board that combines Wi-Fi, Bluetooth, Ethernet connectivity, and Power over Ethernet (PoE) in a single platform. It is designed for industrial automation, smart home systems, remote monitoring, and other network-connected embedded applications where both power and data can be delivered through a single Ethernet cable. The board supports the ESP32 dual-core processor and provides expansion interfaces for sensors, storage, and peripherals. FEATURES • ESP32-WROOM-32 WiFi/BLE module • Ethernet 100Mb interface with IEEE 802.3 PoE support • LiPo battery charger • LiPo battery connector • UEXT connector • User button • Reset button • Micro USB with programmer for ESP32 programming • MicroSD card • Two extension connectors 0.1" step spaced at 1" • PCB dimensions: (75 x 28)mm ~ (3 x 1)" #ESP32 #ESP32POE #IoT #Ethernet #PoE #WiFi #Bluetooth #EmbeddedSystems #IndustrialIoT #SmartHome #OpenSourceHardware #Microcontroller #EdgeComputing #Automation #MakerProjects

78171-0003 Battery Connector Amass https://datasheet.datasheetarchive.com/originals/distributors/Datasheets_SAMA/048897738af1e2a6d1ad1b4edfa70138.pdf Pico-Ezmate SMT PCB header, 3w Molex PICO-EZMATE Series, Series Number 78171, 1.2mm Pitch 3 Way 1 Row Straight PCB Header, Solder Termination, 1.5A 538-78171-0003 https://www.mouser.co.uk/ProductDetail/Molex/78171-0003?qs=rg3U%2F5nEhHfwDfjly946YA%3D%3D Molex 78171-0003

Wire To Board / Wire To Wire Connector S2B-PH-K-S(LF)(SN) CONN-TH_S2B-PH-K-S-LF-SN LCSC Part Number: C173752 JLCPCB Part Class: Extended Part Manufactured by JST Connector Header Through Hole, Right Angle 2 position battery connector JST PH 2-pin

Battery holder -25℃~+85℃ CR1220 SMD Button And Strip Battery Connector ROHS CR1220-2ZX BAT-SMD_CR1220-2ZX LCSC Part Number: C969906 JLCPCB Part Class: Extended Part Manufactured by Q&J

Button And Strip Battery Connector MY-927-02 BAT-SMD_MY-927-02 LCSC Part Number: C2902336 JLCPCB Part Class: Extended Part Manufactured by MYOUNG(美阳)

Button And Strip Battery Connector MY-1220-04 BAT-TH_MY-1220-04 LCSC Part Number: C2979172 JLCPCB Part Class: Extended Part Manufactured by MYOUNG(美阳)

Battery Connector, Snap 9V 1 Cell PC Pin #Battery-connector #36-968-ND

Battery Connector, Snap 9V 1 Cell PC Pin

9V Battery Connector, Snap 9V 1 Cell PC Pin (through hole THT) BATTERY CONTACT 9V 9V battery clip

Battery Connector, Snap 9V 1 Cell PC Pin BATTERY CONTACT 9 V 9 V battery clip through hole

TP4056 1S 1C charger with USB-c connector and battery protection. Copied everything from here: https://easyeda.com/modules/TP4056-Charging-module-USB-C-data_a4752b5b6c6a4c93afdd8b7119d0622c P+ and P- are the outputs but don't have a connector or solder pad yet. Only the schematic has been designed. I didn't do anything on the PCB part! Place these components at your own design! DISCLAIMER: I did not design this nor do i have knowledge about electronics. I'm still learning and i copied this for own use. USE AT OWN RISK!

3 Position Spring Battery Contact Connector Surface Mount #CommonPartsLibrary #Connector #Interconnect #Rectangular-Connector #Spring-Loaded #292448

The ePaper driver board features a 24-pin FPC connector, built-in charging IC for efficient and safe battery charging, and a JST 2-pin BAT connector for easy battery connection. Ideal for creating WiFi-enabled digital photo frames.

This project is a reference design for a 2A Solar Panel Power Manager With 7.2V LiFePO4 Battery and 17V Peak Power Tracking based on LT3652 IC. It includes components like resistors, capacitors, LEDs, and a JST connector for power input and battery connection. The design caters to high input voltage applications and ensures efficient charging with minimal components. #Module #LT3652 #ReferenceDesign #charger #BatteryManagement #solar #reusable #module #bms #analog #LiFePO4 #sublayout

CONN HEADER TH R/A 6POS 2.5mm The M2557R-2x3-N0 is a 2×3 position (6-pin) right-angle wire-to-board header connector from XFCN. It is part of the 2.50 mm pitch M2557 series, commonly used for power and signal connections in consumer electronics, industrial control boards, power supplies, battery systems, and embedded devices. The connector is designed for through-hole PCB mounting and mates with the corresponding P2557 series housing and crimp terminals. Key Features Connector Type: Wire-to-board male header Positions: 6 pins (2 rows × 3 pins) Pitch: 2.50 mm Mounting Style: Through-hole, right-angle Current Rating: 3 A per contact Voltage Rating: 250 V AC/DC Operating Temperature: −25°C to +85°C Contact Material: Brass or phosphor bronze contacts Housing Material: Nylon 66, UL94V-0 flame-retardant Contact Resistance: 30 mΩ max Insulation Resistance: 1000 MΩ minimum Withstanding Voltage: 800 V AC for 1 minute RoHS Compliant Typical Applications Power distribution connections Battery-powered equipment Home appliances Industrial control systems Development boards and embedded electronics General-purpose signal and power interconnects Mechanical Description Configuration: 2 rows × 3 positions PCB Orientation: Right-angle (90°) Mating Housing: P2557 series receptacle housing Pitch Between Pins: 2.50 mm #CommonPartsLibrary #Connector

CONN HEADER TH 8POS 2.5mm 2.54mm-8P ZZ is a through-hole wire-to-board header connector from the XH-style connector family. It features a single-row 8-position configuration with approximately 2.5 mm pitch spacing, making it suitable for power and signal connections in consumer electronics, industrial controls, LED modules, battery systems, and embedded electronics. The connector is designed for PCB mounting and provides a reliable, low-cost interconnect solution for cable assemblies. Key Features Single-row 8-position (1×8) connector 2.5 mm / 2.54 mm pitch wire-to-board interface Through-hole PCB mounting Compatible with XH-series style housings Rated up to 3 A current Rated up to 250 V Tin-plated brass contacts for reliable conductivity UL94V-0 flame-retardant housing material Operating temperature range: -25°C to +85°C Suitable for power distribution and signal connections in electronic equipment Hashtags #Connector #WireToBoard #XHConnector #2_54mmPitch #ThroughHole #PCBConnector #8PinConnector #ElectronicComponents #Interconnect #EmbeddedSystems #IndustrialElectronics #PowerConnector #SignalConnector #RoHSCompliant

Plug Power Connectors The XT60U-M is a high-current 2-pin male DC power connector from the XT60 series, commonly manufactured by AMASS. It is widely used in RC batteries, drones, e-bikes, battery packs, power distribution systems, and other applications that require reliable high-current connections. The connector uses gold-plated brass contacts and a flame-retardant polyamide housing to provide low contact resistance, durability, and safe operation under high loads. Key Features Connector Type: XT60 series male plug Number of Pins: 2 Rated Current: 30 A continuous Rated Voltage: 500 V DC Contact Material: Gold-plated brass Housing Material: Polyamide (PA), UL94 V-0 flame-retardant Wire Size Support: Up to 12 AWG Mounting Method: Cable mount, solder termination Mechanical Life: Approximately 1000 mating cycles Operating Temperature Range: −20 °C to +120 °C Low Contact Resistance for efficient power transfer Polarized Design prevents reverse connection and incorrect mating Compact and Lightweight construction for battery-powered systems Typical Applications RC LiPo battery packs Drones and UAVs Electric bicycles and scooters Robotics projects Portable power systems Battery chargers and power distribution modules #CommonPartsLibrary #Connector

Coin Cell Battery Holders SFC MNT FOR CR2032 #Battery-holder #Coin #Connector #SMD

Battery Holder -25℃~+85℃ Nickel SMD Blade Type Power Connector Assemblies RoHS #CommonPartsLibrary #Connector #battery-holder #21700

Battery Contact Clip 18650 1 Cell PC Pin #CommonPartsLibrary #Connector #Battery-Holder #Clips #Contact #18650

OMGS3 ultra-compact ESP32-S3 board/module, based on dual-core Xtensa LX7 32-bit processor up to 240MHz with RISC-V ultra-low-power coprocessor, 2.4GHz Wi-Fi 802.11b/g/n and Bluetooth LE 5.0, 8MB QSPI Flash and 2MB QSPI PSRAM, integrated 3D high-gain antenna, RGB LED, PMIC, MAX17048G+T10 fuel gauge, 700mA 3.3V LDO regulator, LiPo battery charging, native USB and USB Serial/JTAG support, Qwiic/QT connector, 17 GPIOs, ultra-low deep sleep current, compact 25 x 10mm size. Search Keywords: OMGS3, Unexpected Maker OMGS3, ESP32-S3 module, ESP32-S3 board, ultra compact ESP32-S3, ESP32-S3 WiFi Bluetooth board, ESP32-S3 8MB flash 2MB PSRAM, ESP32-S3 LiPo charger, ESP32-S3 fuel gauge, MAX17048 fuel gauge, Qwiic ESP32-S3 board, tiny ESP32-S3 module Hashtags: #OMGS3 #UnexpectedMakerOMGS3 #ESP32S3 #ESP32S3Board #ESP32S3Module #WiFiBluetoothBoard #BLE5 #8MBFlash #2MBPSRAM #LiPoCharger #FuelGauge #MAX17048 #QwiicConnector #TinyESP32S3 #IoTModule