CONN HEADER SMD 10POS 1.27MM 10-pin 1.27mm SMD

USB Connectors USB-PG 10PIN 040 USB-SMD-LIGHTNING_USB-PG LCSC Part Number: C2858295 JLCPCB Part Class: Extended Part Manufactured by SHOU HAN(首韩)

Connector Header Surface Mount 10 position 0.050" (1.27mm) ARM JTAG SWD #ARM_JTAG_SWD_10

Connector Header Through Hole 10 position 0.100" (2.54mm) ARM JTAG SWD without Key #ARM_JTAG_SWD_10

Connector Header Through Hole 10 position 0.100" (2.54mm) ARM JTAG SWD without Key, with text on footprint #ARM_JTAG_SWD_10

Atmel 10-pin JTAG connector with text pinout on footprint, Header Through Hole 10 position 0.100" (2.54mm), Shrouded - 4 Wall

Atmel 10-pin ISP connector, Header Through Hole 10 position 0.100" (2.54mm), Shrouded - 4 Wall

SP Amp Current Sense Amp Single 80V Automotive 10-Pin MSOP #commonpartslibrary #ADC #integratedcircuit

Atmel 10-pin JTAG connector, Header Through Hole 10 position 0.100" (2.54mm), Shrouded - 4 Wall

Atmel 10-pin ISP connector with text pinout on PCB footprint, Header Through Hole 10 position 0.100" (2.54mm), Shrouded - 4 Wall

Texas Instruments LM5069MM-2/NOPB, Hot Swap Controller, 9 80 V, 10-Pin, MSOP

IC LTC1733EMSE Battery Charger Chip Li-Ion 4.2 volt 1500ma 10-pin MSOP #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

Buck Switching Regulator IC Positive Adjustable 2.5V 1 Output 1A 14-PowerTSSOP (0.173", 4.40mm Width) The LM5010 step-down switching regulator features all the functions needed to implement a low-cost, efficient, buck bias regulator capable of supplying in excess of 1-A load current. This high-voltage regulator contains an N-Channel Buck Switch, and is available in thermally enhanced 10-pin WSON and 14-pin HTSSOP packages. The hysteretic regulation scheme requires no loop compensation, resulting in fast load transient response, and simplifies circuit implementation. The operating frequency remains constant with line and load variations due to the inverse relationship between the input voltage and the ON-time. The valley current limit detection is set at 1.25 A. Additional features include: VCC undervoltage lockout, thermal shutdown, gate drive undervoltage lockout, and maximum duty cycle limiter Features 1• Input Voltage Range: 8 V to 75 V • Valley Current Limit At 1.25 A • Switching Frequency Can Exceed 1 MHz • Integrated N-Channel Buck Switch • Integrated Start-Up Regulator • No Loop Compensation Required • Ultra-Fast Transient Response • Operating Frequency Remains Constant With Load and Line Variations • Maximum Duty Cycle Limited During Start-Up • Adjustable Output Voltage • Precision 2.5-V Feedback Reference • Thermal Shutdown • Exposed Thermal Pad for Improved Heat Dissipation 2 Applications • High Efficiency Point-of-Load (POL) Regulator • Non-Isolated Telecommunications Buck Regulator • Secondary High Voltage Post Regulator • Automotive Systems #TexasInstruments #LM5010MHXNOPB #BuckRegulator #DCDCConverter #SwitchingRegulator #PowerManagement #HighVoltage #StepDownConverter #IndustrialElectronics #EmbeddedSystems #PowerSupplyDesign #HTSSOP14 #PMIC #ElectronicsDesign #VoltageRegulator

Automotive 8 A Synchronous Buck Converter IC – High-efficiency synchronous step-down (buck) DC-DC converter optimized for automotive power supplies, industrial automation, networking equipment, point-of-load regulation, and embedded power applications. Operates from a 4.5 V to 28 V input voltage and provides an adjustable output voltage from 0.6 V to 13 V with up to 8 A continuous output current. Features integrated high-side (20.4 mΩ) and low-side (9.5 mΩ) MOSFETs, D-CAP3™ control architecture for fast transient response, 45 µA typical quiescent current, selectable switching frequencies of 500 kHz, 800 kHz, or 1.2 MHz, pre-biased startup, power-good (PG) output, soft-start, frequency synchronization, and light-load Eco-mode™ operation for improved efficiency. Includes comprehensive protection with cycle-by-cycle current limiting, undervoltage lockout (UVLO), overvoltage protection (OVP), thermal shutdown, and hiccup-mode short-circuit protection. Specified for operation over a −40°C to +150°C junction temperature and housed in a compact 10-pin VQFN-HR (3 × 3 mm) package. #TexasInstruments #TPS56837RPAR #TPS56837 #BuckConverter #SynchronousBuck #DCDCConverter #PowerManagement #PointOfLoad #IndustrialElectronics #AutomotiveElectronics #VQFN10 #EmbeddedSystems

6-Pin \"No Legs\" Cable with 10-pin micro-connector for Cortex processors Cable assembly, designed for ARM Cortex® SWD debugging and programming, featuring a 6-pin Tag-Connect™ Plug-of-Nails™ connector that mates with the TC2030 target footprint and a 10-pin FTSH-105 compatible ribbon connector. The cable supports SWD signals including VCC, SWDIO/TMS, SWCLK/TCK, SWO/TDO, nRESET, and GND for direct connection between compatible debuggers and target PCBs. #CableAssembly #DebugCable #ARMCortex #SWD #TagConnect #TC2030 #ProgrammingCable

Electronic Fuse Regulator 5.5A 10-VQFN-HR (2x2) eFuse (Electronic Fuse) providing overcurrent, short-circuit, overvoltage, reverse-current, and reverse-polarity protection for power paths. It operates from 2.7 V to 23 V, supports up to 5.5 A continuous switch current, has 28.3 mΩ typical on-resistance, and integrates back-to-back FETs with adjustable current limiting. The device is housed in a 10-pin, 2 mm × 2 mm QFN package. #eFuse #PowerProtection #OvercurrentProtection #TexasInstruments

Current Limit Switch 5-Input 2-Output, 1.7mA, 10-Pin, VSSOP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LM5060

Power Switch/Driver 1:1 N-Channel 10A 10-WQFN-HR (1.5x2) Single-channel load switch designed to control power distribution with a configurable rise time for inrush-current control. It operates from a 0.1–5.5 V input and supports up to 10 A continuous current with 4 mΩ typical on-resistance, adjustable quick output discharge, open-drain Power Good signal, and thermal shutdown. The device is housed in a 10-pin WQFN (RYZ) package and operates from −40°C to +125°C. #LoadSwitch #PowerManagement #TexasInstruments #TPS22997 #10A #WQFN

10-Pin Transition-Mode PFC Controller, SSOP-10 SMPS pfc controller SSOP*3.9x4.9mm*P1.00mm*

Digital MEMS Barometric Pressure Sensor – Ultra-compact absolute MEMS barometric pressure sensor with an integrated temperature sensor and 24-bit digital output for altimeters, weather stations, GPS, drones, wearables, industrial monitoring, and IoT applications. Operates from a 1.7 V to 3.6 V supply, measures 260 hPa to 1260 hPa (26 kPa to 126 kPa) absolute pressure with ±0.5 hPa absolute accuracy, and communicates via I²C, SPI, or MIPI I3C℠ interfaces. Features low power consumption (4 µA typical at 1 Hz), embedded temperature compensation, 24-bit pressure output, integrated FIFO, programmable output data rates from 1 Hz to 200 Hz, interrupt generation, and 22,000 g shock survivability. Specified for operation over a −40°C to +85°C temperature range and housed in a 10-pin HLGA (2.0 × 2.0 × 0.73 mm) surface-mount package. #STMicroelectronics #LPS22HHTR #MEMSSensor #PressureSensor #Barometer #DigitalPressureSensor #TemperatureSensor #I2C #SPI #I3C #WeatherStation #Altimeter #EmbeddedSystems