Battery Power Management IC Lithium Ion/Polymer 24-QFN (4x4) nPM1100 is an integrated Power Management IC (PMIC) with a linear-mode lithium-ion/lithium-polymer battery charger in a compact 2.1x2.1 mm WLCSP package. It has a highly efficient, dual-mode configurable output DC/DC buck regulator. nPM1100 is an extremely compact PMIC device, created for space constrained applications with a small lithium-ion or lithium-polymer battery. It is compatible with all nRF52 and nRF53 Series SoCs and supports charging batteries at up to 500 mA through USB, and also delivers up to 150 mA of current to power external components with regulated voltage. A minimum of five passive components are required for operation and the device functions without a control interface. It is the perfect companion for nRF52 and nRF53 multiprotocol SoCs in battery powered designs. Low quiescent current (IQ) extends battery life during shipping and storage with Ship mode, or in operation using auto-controlled hysteretic buck mode for high efficiency down to 1 µA loads. Charge and error indication LED drivers are built in. Charge profile limits are configurable and VBUS current limits can be fixed or auto-controlled with on-chip USB port detection. • 400 mA linear battery charger • Linear charger for lithium-ion/lithium-polymer batteries • Adjustable charge current from 20 mA to 400 mA • Selectable termination voltage of 4.1 V or 4.2 V • Automatic trickle, constant current, and constant voltage charging • Battery thermal protection • Discharge current limitation • JEITA compliant • Li-ion/Li-polymer USB battery charger with a high efficiency buck regulator • 800 nA - Typical quiescent current • 460 nA - Shipping mode quiescent current • Thermal protection • Input regulator • USB compatible current limit of 100 mA and 500 mA • 4.1 V to 6.7 V input voltage range for normal operation • 20 V overvoltage protection • Reverse current protection • 3.0 V to 5.5 V system voltage output • USB port detection supporting the following types: • SDP • CDP/DCP • 1.8 V to 3.0 V, 150 mA step-down buck regulator • Step-down buck regulator with up to 92% efficiency • Automatic transition between hysteretic and pulse width modulation (PWM) modes • Forced PWM mode for clean power operation • Pin-selectable output voltage (1.8 V, 2.1 V, 2.7 V, 3.0 V) • Soft start-up • LED drivers for charger state indication • 5 mA low side LED driver for charging indication • 5 mA low side LED driver for error indication • 2.3 V to 4.35 V battery operating input range • 2.1x2.1 mm WLCSP package • Suitable for two layer PCB design #CommonPartsLibrary #IntegratedCircuit #NordicSemiconductor #nPM1100 #PMIC #BatteryCharger #PowerManagement #LiIon #LiPolymer #BuckConverter #Wearables #IoT #WirelessSensor #LowPowerDesign #USBCharging #EmbeddedSystems #nRF52 #nRF53 #PortableElectronics

The FS8205A is a dual N-channel enhancement-mode power MOSFET designed primarily for lithium-ion and lithium-polymer battery protection applications. Manufactured by several semiconductor vendors including Fortune Semiconductor, this device integrates two low on-resistance MOSFETs within a compact surface-mount package, enabling efficient bidirectional current control for battery charging and discharging systems. The device is commonly paired with single-cell battery protection controller ICs such as the DW01A to provide overcharge, overdischarge, overcurrent, and short-circuit protection in portable electronic products. Its low drain-to-source resistance minimizes conduction losses and improves overall battery efficiency while maintaining compact PCB layout requirements. The FS8205A is widely used in battery management systems, portable consumer electronics, rechargeable battery packs, USB-powered devices, IoT hardware, and embedded power management circuits requiring reliable load switching and battery protection functionality. Engineering Specification Device Type Dual N-channel power MOSFET Transistor Technology Enhancement-mode MOSFET architecture Channel Configuration Dual independent N-channel MOSFETs Switching Characteristics Low on-resistance for efficient power switching Gate Characteristics Logic-level gate drive compatibility Current Handling Optimized for battery charge and discharge current control Power Efficiency Low conduction loss for improved battery runtime Protection System Compatibility Designed for lithium battery protection controller integration Thermal Characteristics Compact thermal-efficient surface-mount structure Package Type SOP-8 surface-mount package Mounting Style Surface mount technology Reliability Features Stable switching performance and robust load handling capability Applications Lithium-ion battery protection Battery management systems Portable electronics Rechargeable battery packs USB-powered devices Power path switching Embedded systems Consumer electronics IoT hardware Load switching circuits Manufacturer Commonly manufactured by Fortune Semiconductor and compatible vendors #commonpartslibrary #mosfet #dualmosfet #nchannelmosfet #batteryprotection #batterymanagement #powermanagement #powerelectronics #embeddedhardware #consumerelectronics #surfaceountcomponents #electronicsdesign #lithiumbattery #loadswitch #portableelectronics

Battery Battery Protection IC Lithium Ion/Polymer SOT-23-6 S-8261ABJMD-G3JT2G is a high-accuracy lithium-ion/lithium-polymer battery protection IC designed for single-cell battery packs. It integrates voltage detection and timing circuits to protect rechargeable batteries against overcharge, overdischarge, overcurrent, and short-circuit conditions, helping improve battery safety, reliability, and lifespan. The device is commonly used in portable electronics, battery packs, IoT devices, and handheld equipment. It is housed in a compact SOT-23-6 package suitable for space-constrained designs. Key Features Single-cell Li-ion / Li-polymer battery protection IC High-accuracy overcharge detection High-accuracy overdischarge detection Overcurrent and short-circuit protection Built-in delay circuits to prevent false triggering Low current consumption (typical operating current in the µA range) Wide operating voltage range Support for 0 V battery charging function Compact SOT-23-6 package RoHS compliant and lead-free version available Typical Applications Li-ion battery packs Li-polymer battery packs Portable consumer electronics Wireless sensors and IoT devices Handheld instruments Rechargeable battery-powered equipment #BatteryProtectionIC #LiIonBattery #LiPoBattery #PowerManagement #BatteryPackProtection #OverchargeProtection #OverdischargeProtection #ShortCircuitProtection #SOT23 #ABLIC #SeikoInstruments #PortableElectronics #RechargeableBattery #PMIC #SingleCellBattery

I²C-Controlled Single-Cell Buck Battery Charger IC with Power Path Management – Highly integrated switch-mode battery charger for single-cell Li-Ion/Li-Polymer batteries used in portable electronics, IoT devices, wearables, handheld terminals, medical devices, and embedded battery-powered systems. Operates from a 3.5 V to 18 V input supply and delivers up to 2 A programmable charging current with support for USB and adapter inputs. Features NVDC power-path management, I²C interface, integrated power MOSFETs, narrow VDC architecture, dynamic power management, input current optimization, buck charging efficiency up to 93%, and an integrated 12-bit ADC for monitoring battery voltage, charge current, input voltage/current, system voltage, and temperature. Includes JEITA temperature profile support, programmable charging parameters, USB OTG boost mode (5 V output), power-good indication, and comprehensive protection including overvoltage, overcurrent, thermal regulation, thermal shutdown, watchdog timer, and short-circuit protection. Operates over a −40°C to +85°C temperature range and is housed in a compact 18-pin WQFN-HR (3 × 2.5 mm) package. #TexasInstruments #BQ25628ERYKR #BQ25628E #BatteryCharger #LiIonCharger #PowerPathManagement #BuckCharger #USBOTG #I2C #PowerManagement #PortableElectronics #EmbeddedSystems

Power Switch/Driver 1:1 P-Channel 2A SOT-23-5 The GLF1100 is an ultra-efficiency, 2 A rated, Load Switch with integrated slew rate control. The best in class efficiency makes it an ideal chose for use in IoT, mobile, and wearable electronics. The GLF1100 features ultra-efficient IQSmartTM technology that supports the lowest quiescent current (IQ) and shutdown current (ISD) in the industry. Low IQ and ISD solutions help designers to reduce parasitic leakage current, improve system efficiency, and increase battery lifetime. The GLF1100 integrated slew rate control can also enhance system reliability by mitigating bus voltage swings during switching events. Where uncontrolled switches can generate high inrush currents that result in voltage droop and/or bus reset events, the GLF slew rate control specifically limits inrush currents during turn-on to minimize voltage droop. GLF1100 Load Switch devices support an industry leading wide input voltage range and helps to improve operating life and system robustness. Furthermore, one device can be used in multiple voltage rail applications which helps to simplify inventory management and reduce operating cost. FEATURES • Wide Input Range: 1.1 V to 5.5 V 6 V abs max • RON : 82 mΩ Typ @ 5.5 VIN • IOUT Max: 2 A • Ultra-Low IQ: 10 nA Typ @ 5.5 VIN • Ultra-Low ISD: 25 nA Typ @ 5.5 VIN • Controlled Rise Time: 2.2 ms at 3.3 VIN • Internal EN Pull-Down Resistor • Integrated Output Discharge Switch • Wide Operating Temperature Range: -40 °C ~ 85 °C • HBM: 6 kV, CDM: 2 kV APPLICATIONS • Telecommunication Module • Low Power Subsystem • Mobile Devices #commonpartslibrary #integratedcircuit #powermanagement #LoadSwitch #PowerManagement #PMIC #HighSideSwitch #LowPower #BatteryPowered #PortableElectronics #GLFIntegratedPower #SOT23 #PowerDistribution

Wireless Power Receiver PMIC 20-VQFN (3.5x4.5) BQ51013BRHLT is a wireless power receiver integrated circuit from Texas Instruments designed for inductive power transfer applications compliant with wireless charging standards. The device integrates power rectification, voltage regulation, communication control, and protection circuitry to enable efficient wireless charging for portable and embedded electronic devices. This receiver IC is optimized for low-power wireless charging systems and supports seamless energy transfer from compatible transmitter platforms without the need for physical connectors. It provides regulated power output suitable for charging batteries and powering embedded systems while incorporating dynamic power management, foreign object detection support, thermal protection, and overvoltage protection for safe operation. The BQ51013BRHLT is widely used in wearable electronics, wireless sensor platforms, medical devices, mobile accessories, handheld products, and compact consumer electronics requiring cable-free charging capability. Its compact package and high integration level simplify PCB layout and reduce external component requirements for space-constrained wireless power designs. #commonpartslibrary #wirelesscharging #powermanagement #texasinstruments #wirelesspower #batterycharging #embeddedhardware #portableelectronics #electronicscomponents #inductivecharging

Flat Vibration Motor 3V Motors - AC, DC RoHS LCM1027A2445F is a compact electromechanical buzzer component designed for audible notification and alert functions in embedded electronic systems. The device is engineered to generate stable acoustic output with low power consumption, making it suitable for portable electronics, industrial control equipment, alarm systems, and user interface applications requiring reliable sound indication. This buzzer is commonly integrated into embedded hardware platforms for status indication, warning alerts, keypad feedback, and operational notifications. Its compact package and surface-mount compatibility enable efficient integration into space-constrained PCB layouts while supporting automated assembly processes. The LCM1027A2445F is optimized for dependable acoustic performance and long operational life across a wide range of environmental conditions. It is widely used in consumer electronics, smart devices, communication equipment, medical instruments, and battery-powered embedded applications requiring compact and efficient audible signaling functionality. #commonpartslibrary #buzzer #audioindicator #embeddedhardware #electronicscomponents #acousticdevice #surfacemountdevice #portableelectronics #industrialelectronics #alarmsystem

BQ29209DRBR – Integrated 2-cell Li-ion/Li-polymer battery protection and management IC. Provides overvoltage, undervoltage, and overcurrent protection for each cell while incorporating automatic cell balancing to maintain uniform charge levels. Designed for compact 2S battery pack applications, it ensures safe and reliable operation in portable electronics, battery-powered devices, and custom BMS circuits. Ideal for extending battery life, preventing overcharge or deep discharge, and supporting high-efficiency energy management. #2SLiIonBMS #BatteryProtectionIC #CellBalancing #OvervoltageProtection #UndervoltageProtection #OvercurrentProtection #PortableElectronics #BMSDesign

The TPS63802DLAR is a highly integrated synchronous buck-boost DC-DC converter designed to provide a regulated output voltage when the input voltage is either above, below, or equal to the desired output voltage. The device automatically transitions between buck and boost operating modes to maximize efficiency across a wide input range. It is optimized for battery-powered and portable electronic applications requiring high power conversion efficiency, low quiescent current, compact solution size, and stable operation under varying load conditions. The TPS63802DLAR is commonly used in wearable devices, IoT products, wireless modules, sensors, handheld electronics, and embedded systems. Engineering Specification Device Type Synchronous Buck-Boost DC-DC Converter Topology Automatic Buck and Boost Mode Operation Output Configuration Single Adjustable Output Control Method Current Mode Control Architecture Switching Operation High-Frequency Synchronous Switching Regulation Power Conversion Step-Up and Step-Down Voltage Regulation Efficiency Characteristics High Conversion Efficiency Across Wide Input and Load Conditions Quiescent Current Optimized for Low-Power and Battery-Operated Applications Protection Features Overcurrent Protection Thermal Shutdown Protection Short-Circuit Protection Undervoltage Lockout Protection Soft-Start Functionality Package Style VSON Surface-Mount Package Mounting Type Surface Mount Technology Input Source Compatibility Single-Cell and Multi-Cell Battery Systems USB Power Sources Portable Power Systems Applications Battery-Powered Electronics Wearable Devices Internet of Things Equipment Wireless Communication Modules Portable Medical Devices Handheld Consumer Electronics Embedded Control Systems Industrial Sensors Data Acquisition Systems Features Automatic Buck-Boost Transition Integrated Power Switches Low Quiescent Current Operation High Power Density Design Compact Footprint Fast Transient Response Wide Input Voltage Compatibility High Reliability Performance Optimized for Portable Applications RoHS Compliant Construction Manufacturer Texas Instruments #commonpartslibrary #integratedcircuit #powermanagement #dcdcconverter #buckboost #powersupply #voltageregulator #batterypowered #embeddedsystems #portableelectronics #iot #texasinstruments #powerelectronics #smps #electroniccomponents

OR Controller P-Channel 1:1 SC-70-6 The LM66100DCKR is an ideal diode and power path management device manufactured by Texas Instruments. This integrated circuit is designed to provide low-loss reverse polarity protection and automatic power path control for low-voltage DC power systems. By utilizing an integrated low-resistance MOSFET architecture, the device significantly reduces forward voltage drop and power dissipation compared to conventional Schottky diodes. The device supports automatic source selection, reverse current blocking, and efficient power OR-ing functionality, making it suitable for battery-powered devices, USB-powered electronics, industrial embedded systems, portable equipment, and redundant power supply architectures. Its ultra-low forward voltage characteristics improve overall system efficiency and help extend battery operating life in portable applications. The LM66100DCKR is optimized for compact embedded designs requiring efficient power routing, input protection, and seamless power source switching while minimizing thermal losses and PCB footprint requirements. Engineering Specification Device Type Ideal diode and power path protection IC Power Management Function Reverse current blocking and automatic power path control Switching Technology Integrated low-resistance MOSFET architecture Reverse Protection Reverse polarity and reverse current protection Forward Voltage Characteristics Ultra-low forward voltage drop for high-efficiency operation Power Path Features Automatic source selection and power OR-ing support Efficiency Characteristics Reduced conduction loss compared to conventional diode solutions Input Characteristics Designed for low-voltage DC power rail operation Thermal Characteristics Low thermal dissipation due to efficient MOSFET conduction Protection Features Reverse current blocking Reverse polarity protection Power path isolation Fault-tolerant operation Package Type SC70 surface-mount package Mounting Style Surface mount technology Applications Battery-powered electronics USB-powered systems Power multiplexing Portable devices Embedded systems Industrial electronics Redundant power supplies Power OR-ing circuits IoT hardware Low-power electronic systems Manufacturer Texas Instruments #commonpartslibrary #idealdiode #powermanagement #reversepolarityprotection #powerpathcontroller #texasinstruments #powerelectronics #embeddedhardware #portableelectronics #surfaceountcomponents #electronicsdesign #powersupply #usbpower #batterypowered #industrialelectronics

Buck-Boost Switching Regulator IC Positive Adjustable 1.2V 1 Output 3.5A (Switch) 14-VFDFN Exposed Pad The TPS63020DSJT is a high-efficiency synchronous buck-boost DC-to-DC converter manufactured by Texas Instruments. This integrated power management device is designed to provide a stable regulated output voltage from input power sources that may vary above or below the desired output level. The converter automatically transitions between buck and boost operating modes to maintain efficient and continuous voltage regulation across a wide input range. The device integrates low-resistance power MOSFETs, advanced control circuitry, and high-efficiency switching architecture to minimize power loss and optimize battery utilization in portable electronic systems. It is widely used in battery-powered applications, embedded systems, wireless communication devices, portable instrumentation, industrial electronics, and USB-powered hardware requiring compact and reliable voltage regulation. The TPS63020DSJT is optimized for systems powered by single-cell lithium-ion, lithium-polymer, or multi-cell alkaline battery configurations. Its compact package and integrated functionality reduce external component count and simplify PCB layout while delivering high power conversion efficiency and low quiescent current performance. Engineering Specification Device Type Synchronous buck-boost DC-to-DC converter Power Conversion Topology Automatic buck and boost regulation architecture Input Characteristics Supports input voltages above or below regulated output voltage Output Characteristics Stable regulated DC voltage output Switching Technology Integrated synchronous MOSFET switching architecture Efficiency Characteristics High-efficiency power conversion for battery-powered systems Control Features Automatic operating mode transition and load regulation Power Consumption Low quiescent current operation for portable electronics Thermal Characteristics Integrated thermal management and protection features Protection Features Overcurrent protection Thermal shutdown Undervoltage lockout Short-circuit protection Package Type WSON surface-mount package Mounting Style Surface mount technology Applications Portable electronics Battery-powered systems Embedded hardware Wireless communication devices USB-powered electronics Industrial control systems Portable instrumentation IoT devices Consumer electronics Power management systems Manufacturer Texas Instruments #commonpartslibrary #buckboostconverter #dcdcconverter #powermanagement #texasinstruments #powerelectronics #powersupply #embeddedhardware #portableelectronics #batterypowered #surfaceountcomponents #electronicsdesign #voltageregulator #iothardware #industrialelectronics

SIM Card Connectors 1040310811 SIM-SMD_8P-1040310811 LCSC Part Number: C585350 JLCPCB Part Class: Extended Part Manufactured by MOLEX Molex 104031-0811 microSD card socket connector, push-pull type, surface mount (SMT), 8-position microSD memory card receptacle with card-detect switch, 1.42mm profile height, liquid crystal polymer (LCP) housing UL94V-0, phosphor bronze contacts with gold plating, stainless steel shell, designed for removable microSD storage applications in embedded systems, IoT devices, consumer electronics and portable equipment. Search Keywords: 104031-0811, Molex 104031-0811, Molex microSD socket, microSD card connector SMT, push pull microSD connector, microSD card receptacle, card detect microSD socket, 8 pin microSD connector, low profile microSD socket, SMT memory card connector, Molex 104031 series, microSD holder with card detect Hashtags: #1040310811 #Molex1040310811 #Molex #MicroSDSocket #MicroSDConnector #MemoryCardConnector #PushPullSocket #CardDetectSwitch #SMTConnector #EmbeddedStorage #MicroSDHolder #LCPHousing #PortableElectronics #IoTHardware #PCBConnector

Buck-Boost Switching Regulator IC Positive Adjustable 2.5V 1 Output 2A 15-PowerVFQFN The TPS63070RNMT is a high-efficiency buck-boost DC-to-DC converter manufactured by Texas Instruments. This power management integrated circuit is designed to provide a stable regulated output voltage from input sources that may be above, below, or equal to the desired output voltage. The device automatically transitions between buck and boost operating modes to maintain efficient and continuous power delivery across varying supply conditions. The converter integrates low-resistance power MOSFETs and advanced control circuitry to achieve high conversion efficiency, low quiescent current, and compact implementation. It is widely used in battery-powered systems, portable electronics, embedded devices, industrial control systems, wireless communication equipment, and USB-powered applications requiring stable voltage regulation from fluctuating power sources. The TPS63070RNMT is optimized for applications demanding high power density, extended battery life, and reliable operation under dynamic load conditions. Its compact package and integrated functionality reduce external component count and simplify PCB design for modern power management architectures. Engineering Specification Device Type Synchronous buck-boost DC-to-DC converter Power Topology Automatic buck and boost mode operation Input Voltage Characteristics Supports input voltages above, below, or equal to output voltage Output Characteristics Regulated fixed or adjustable DC voltage output Switching Technology Integrated synchronous power MOSFET architecture Efficiency Characteristics High-efficiency power conversion across wide operating conditions Control Architecture Advanced PWM/PFM power regulation control Current Capability Designed for medium-to-high current portable power applications Quiescent Current Low standby current for battery-powered operation Thermal Characteristics Integrated thermal protection and efficient heat management Protection Features Overcurrent protection Thermal shutdown Undervoltage lockout Short-circuit protection Package Type VQFN surface-mount package Mounting Style Surface mount technology Applications Battery-powered electronics Portable devices USB-powered systems Industrial automation Embedded systems Wireless communication equipment IoT devices Portable instrumentation Power banks Single-cell battery applications Manufacturer Texas Instruments #commonpartslibrary #powermanagement #buckboostconverter #dcdcconverter #texasinstruments #powerelectronics #powersupply #embeddedhardware #portableelectronics #batterymanagement #surfaceountcomponents #electronicsdesign #voltageregulator #industrialelectronics #usbpower

USBPD and Multiple Fast Charging Protocol Receiving Chip CH224 CH224K is a USB Power Delivery protocol controller integrated circuit designed for fast-charging and programmable USB Type-C power negotiation applications. The device enables intelligent voltage trigger and power profile selection from compatible USB Type-C and USB PD power sources, making it suitable for embedded power systems, portable electronics, development boards, and battery-powered devices. This controller supports automatic communication with USB Type-C power adapters to negotiate higher voltage and current profiles for efficient power delivery. It simplifies USB PD implementation by integrating protocol handling, voltage selection logic, and interface control into a compact low-power solution with minimal external component requirements. The CH224K is widely used in DIY electronics, portable charging systems, embedded controllers, IoT hardware, industrial devices, and USB Type-C powered applications requiring stable and configurable DC power input. Its compact surface-mount package and simplified design architecture enable rapid integration into space-constrained PCB layouts. #commonpartslibrary #usbtypec #usbpd #powerdelivery #powermanagement #embeddedhardware #fastcharging #electronicscomponents #portableelectronics #surfacemountdevice

DC-DC Converters TPS61023DRLT SOT-563-6_L1.6-W1.2-P0.5-LS1.6-BR LCSC Part Number: C1852149 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TPS61023 synchronous boost converter, ultra-low input voltage step-up DC/DC regulator with 0.5V to 5.5V input range, designed for battery and supercapacitor-powered applications. Features 3.7A switching current limit, adjustable output voltage from 2.2V to 5.5V, up to 94% efficiency, automatic PFM/PWM operation, pass-through mode, true load disconnect during shutdown, output overvoltage, short-circuit and thermal protection. Packaged in SOT563-6 (1.2mm × 1.6mm), suitable for portable electronics, backup power supplies, IoT devices and energy harvesting applications. Search Keywords: TPS61023, TPS61023DRLR, Texas Instruments TPS61023, synchronous boost converter, ultra low input voltage boost converter, 0.5V boost converter, 3.7A boost regulator, DC DC step up converter, supercapacitor boost converter, battery powered boost converter, SOT563 boost converter, energy harvesting power supply, low voltage startup boost converter Hashtags: #TPS61023 #TPS61023DRLR #TexasInstruments #BoostConverter #DCDCConverter #StepUpConverter #SynchronousBoost #PowerManagementIC #EnergyHarvesting #Supercapacitor #BatteryPowered #LowVoltageBoost #SOT563 #PMIC #PortableElectronics