1/1 Transceiver Half RS422, RS485 8-SOIC These devices have robust 3.3-V drivers and receivers in a small package for demanding industrial applications. The bus pins are robust to ESD events with high levels of protection to Human-Body Model and IEC Contact Discharge specifications. Each of these devices combines a differential driver and a differential receiver which operate from a single 3.3-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. These devices feature a wide common-mode voltage range making the devices suitable for multi-point applications over long cable runs. These devices are characterized from –40°C to 125°C 1• Small-size VSSOP Packages Save Board Space, or SOIC for Drop-in Compatibility • Bus I/O Protection – >±15 kV HBM Protection – >±12 kV IEC 61000-4-2 Contact Discharge – >±4 kV IEC 61000-4-4 Fast Transient Burst • Extended Industrial Temperature Range –40°C to 125°C • Large Receiver Hysteresis (80 mV) for Noise Rejection • Low Unit-Loading Allows Over 200 Connected Nodes • Low Power Consumption – Low Standby Supply Current: < 2 µA – ICC < 1 mA Quiescent During Operation • 5-V Tolerant Logic Inputs Compatible With 3.3-V or 5-V Controllers • Signaling Rate Options Optimized for: 250 kbps, 20 Mbps, 50 Mbps • Glitch Free Power-Up and Power-Down Bus Inputs and Outputs 2 Applications • Factory Automation • Telecommunications Infrastructure • Motion Control #SN65HVD75D #RS485 #RS422 #Transceiver #TexasInstruments #IndustrialCommunication #FactoryAutomation #MotionControl #TelecomInfrastructure #ESDProtection #HalfDuplex #InterfaceIC #EmbeddedSystems #IndustrialElectronics #DataCommunication

Dual-channel H-bridge motor driver The DRV8833PWR is a dual H-bridge motor driver IC from Texas Instruments designed for driving small DC motors, stepper motors, solenoids, and other inductive loads in low-voltage battery-powered systems. It integrates two full H-bridge outputs that allow independent or combined control of two motors or one bipolar stepper motor. It is commonly used in robotics, toys, printers, and embedded motion-control applications due to its compact size and built-in protection features. Key Features Dual H-Bridge Motor Driver Drives 2 DC motors independently or 1 bipolar stepper motor Wide Supply Voltage Range Operates from 2.7 V to 10.8 V motor supply (VM) Output Current Capability Up to 2 A peak per H-bridge (package-dependent RMS limits apply) Supports parallel operation for higher current drive Low On-Resistance MOSFET Output Stage Reduces power loss and improves efficiency in battery-powered designs PWM Current Regulation Built-in current limiting and chopping control for better motor performance Multiple Control Modes Forward, reverse, brake, and coast control via simple logic inputs Protection Features Overcurrent protection Short-circuit protection Undervoltage lockout (UVLO) Thermal shutdown Low-Power Sleep Mode Reduces standby current for battery applications Compact Package 16-pin TSSOP (PW package), optimized for space-constrained PCB designs #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Motor Drivers TMC2209-LA-T QFN-28_L5.0-W5.0-P0.50-BL-EP LCSC Part Number: C2150710 TRINAMIC TMC2209-LA two-phase stepper motor driver IC with STEP/DIR interface, up to 2.8A peak coil current (2A RMS), ultra-quiet StealthChop2 operation, SpreadCycle current control, StallGuard4 sensorless stall detection, CoolStep automatic current reduction, MicroPlyer interpolation up to 256 microsteps, integrated pulse generator, UART configuration interface, internal sense resistor option, low RDS(on) MOSFETs, 4.75V to 29V motor supply range, QFN package with exposed thermal pad, designed for 3D printers, CNC machines, robotics, automation and battery-powered equipment. Search Keywords: TMC2209, TMC2209-LA, Trinamic TMC2209, stepper motor driver, silent stepper driver, StealthChop2, SpreadCycle, StallGuard4, CoolStep, MicroPlyer, UART stepper driver, STEP DIR driver, 2A RMS stepper driver, 2.8A peak motor driver, 3D printer driver, CNC motor driver, QFN stepper driver Hashtags: #TMC2209 #TMC2209LA #Trinamic #StepperDriver #StepperMotorDriver #StealthChop2 #SpreadCycle #StallGuard4 #CoolStep #MicroPlyer #UARTDriver #3DPrinterElectronics #CNCElectronics #MotionControl #MotorDriverIC #SilentStepperDriver