Infrared (IR) Emitter 940nm 1.25V 50mA 20° Radial The IR928-6C-F specification defines the engineering requirements for an electromechanical relay component intended for signal or power switching applications in industrial, commercial, and electronic control systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure dependable switching performance, long-term operational reliability, and compatibility with applicable engineering standards. It serves as the primary technical reference for design integration, manufacturing, inspection, testing, and product acceptance. The component is designed to provide reliable isolation and controlled switching of electrical circuits while maintaining stable performance under specified operating conditions. It shall be suitable for integration into printed circuit board assemblies and electronic control equipment where dependable relay operation and electrical isolation are required. Engineering Requirements The component shall be manufactured using qualified materials and validated production processes to ensure consistent electrical characteristics, mechanical durability, and long service life. Construction shall provide reliable contact operation, insulation integrity, and resistance to mechanical and environmental stresses encountered during normal operation. Electrical performance shall comply with the specified operating voltage, switching capacity, insulation resistance, dielectric strength, and contact reliability requirements. The relay shall maintain stable switching characteristics throughout its specified operating temperature range and expected service life. Workmanship shall be free from defects including cracks, contamination, corrosion, misalignment, or physical damage that could impair electrical performance or mechanical operation. Manufacturing, inspection, and functional testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with approved engineering specifications. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change management process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical specifications, material certifications, inspection reports, qualification records, manufacturing instructions, and revision-controlled technical documentation. All records shall be maintained in accordance with the organization's quality management and configuration control procedures. Revision Control All revisions to this specification shall be processed through the formal engineering change control system. Technical changes shall be reviewed, validated, and approved to ensure continued compliance with design intent, manufacturing requirements, and applicable industry standards. #EngineeringSpecification #ElectromechanicalRelay #RelayComponent #ElectricalEngineering #IndustrialElectronics #QualityAssurance #Manufacturing #EngineeringDocumentation #Compliance

1 Pin Screw Terminal, Power Tap M4 Surface Mount The 7466004R specification defines the engineering requirements for an electronic component intended for use in control, signal, or power management systems within industrial and embedded electronic applications. This specification establishes the functional, mechanical, electrical, environmental, and quality requirements necessary to ensure consistent performance, long-term reliability, and compatibility with standard electronic manufacturing processes. The component is intended for integration into electronic assemblies requiring stable operation, predictable electrical behavior, and dependable performance under defined operating conditions. It is suitable for use in systems where reliability, repeatability, and controlled electrical characteristics are essential for proper system function. Engineering Requirements The component shall be manufactured using qualified materials and controlled production processes to ensure consistent electrical performance and mechanical integrity. Construction shall support stable operation under intended environmental and electrical conditions without degradation of functionality. Electrical characteristics shall remain stable under normal operating conditions, ensuring reliable signal or power handling performance as applicable to the component’s function. The device shall maintain consistent behavior during system startup, steady-state operation, and controlled shutdown conditions. Mechanical construction shall ensure durability and secure integration into printed circuit board assemblies or mechanical mounting systems. The component shall resist physical deformation, contamination, corrosion, and other defects that may compromise performance or reliability. Workmanship shall be free from visible or functional defects including cracks, misalignment, poor solderability, or material inconsistencies. Manufacturing and inspection shall be performed under controlled quality systems using calibrated equipment to ensure compliance with engineering requirements. Any deviation from this specification shall require formal engineering evaluation, documented justification, and approval through established engineering change control procedures prior to implementation. Documentation Supporting documentation shall include engineering drawings, material specifications, inspection reports, qualification data, and revision-controlled manufacturing documentation. All records shall be maintained under formal configuration management and quality assurance systems to ensure traceability and consistency. Revision Control All changes to this specification shall be managed through formal engineering change control processes. Each revision shall undergo technical review, validation, and approval prior to release to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #ElectronicComponents #IndustrialElectronics #EmbeddedSystems #Manufacturing #QualityAssurance #EngineeringDesign #ProductReliability #EngineeringDocumentation #Compliance

Sensor Evaluation Boards RoHS The OV2640 Camera Board integrates the OV2640 2MP CameraChip™ sensor with onboard circuitry to simplify interfacing with microcontrollers. It captures images up to UXGA resolution (1622 × 1200 / 1632 × 1232 depending on configuration) and supports both raw and compressed output formats. The sensor also includes an internal image signal processor (ISP), allowing direct JPEG compression without external processing. This makes it especially suitable for low-cost embedded systems where bandwidth and MCU resources are limited. ⭐ Key Features 📸 Image Performance 2 Megapixel CMOS sensor (OV2640) Max resolution: UXGA (up to ~1600 × 1200 class) Frame rates (typical): UXGA / SXGA: up to ~15–30 fps (depending on mode) SVGA: up to 30 fps CIF: up to 60 fps 🎨 Output Formats Supports multiple image data formats: JPEG (hardware compressed) YUV 422 / 420 RGB565 / RGB555 YCbCr 4:2:2 8-bit raw / compressed output modes ⚡ Electrical Characteristics Supply voltage: 3.3V I/O voltage range: 1.7V – 3.3V Low-power CMOS design optimized for embedded devices

The ESP32-DEVKITC-VE evaluation kit from Espressif Systems is a high-performance development platform for RF, RFID, and wireless applications. It features the ESP32-WROVER-E with embedded Xtensa dual-core 32-bit LX6 microprocessor running up to 240 MHz, with 8MB Flash and 8MB PSRAM for efficient data processing. This board supports Wi-Fi 802.11 b/g/n and Bluetooth® Smart Ready 4.x (BLE) connectivity at 2.4GHz, offering wireless communication options. With 448KB ROM, 520KB SRAM, and 16KB SRAM in RTC, it provides ample memory for complex applications. It includes up to 24 GPIOs, SD card, UART, SPI, SDIO, I2C, LED and motor PWM, I2S, IR, pulse counter, capacitive touch sensor, ADC, DAC, and TWAI® (compatible with ISO 11898-1/CAN 2.0) #commonpartslibrary #ESP32-WROVER-E #evaluationboard

SMD,22x16mm Sensor Evaluation Boards ROHS #Module #part #Sensor-board

QTR-1A - Phototransistor Sensor Evaluation Board #Module #Sensor

Audio D/A Converter ICs 2VRMS DirectPath Aud io Stereo DAC 20-TSSOP The PCM5102AQPWRQ1 specification defines the engineering requirements for an automotive-grade digital-to-analog audio converter integrated circuit intended for high-performance digital audio applications. The specification establishes the functional, electrical, mechanical, thermal, and quality requirements necessary to ensure reliable conversion of digital audio signals into high-fidelity analog outputs. It serves as the governing technical reference for component selection, system integration, manufacturing, verification, and quality assurance throughout the product lifecycle. The device is designed to provide high-resolution audio performance with low distortion, low noise, and stable operation under automotive environmental conditions. It is suitable for use in infotainment systems, digital audio processing equipment, communication systems, and other embedded electronic applications requiring reliable digital-to-analog signal conversion. Engineering Requirements The component shall be manufactured using qualified semiconductor fabrication processes and approved materials to ensure consistent electrical performance, mechanical integrity, and long-term reliability. The device shall comply with applicable automotive qualification requirements and maintain stable operation within its specified voltage, temperature, and environmental operating ranges. Electrical performance shall meet the specified requirements for signal integrity, dynamic range, total harmonic distortion, noise performance, and output accuracy. The package shall be compatible with standard surface-mount assembly processes and shall withstand soldering and handling conditions without degradation. Workmanship shall be free from physical defects, contamination, package damage, or manufacturing irregularities that could affect functionality or reliability. Inspection, testing, and validation shall be performed using calibrated equipment and controlled procedures to verify compliance with all applicable engineering and quality requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approved change authorization prior to implementation. Documentation Supporting documentation shall include engineering drawings, electrical specifications, qualification reports, material declarations, inspection records, manufacturing documentation, and revision-controlled technical files. All documentation shall be maintained in accordance with established engineering configuration management and quality control procedures. Revision Control Changes to this specification shall be managed through the formal engineering change control process. All revisions shall undergo technical review, validation, and approval to ensure continued compliance with design intent, automotive quality standards, and applicable regulatory requirements. #EngineeringSpecification #AutomotiveElectronics #DigitalToAnalogConverter #AudioEngineering #EmbeddedSystems #QualityAssurance #Semiconductor #EngineeringDocumentation #Compliance #CommonPartsLibrary #IntegratedCircuit #Data-Acquisition #ADCs #DACs #PCM5102

- LR1110 Transceiver; LoRa® Evaluation Board #CommonPartsLibrary #EvaluationBoard #RF #Transceiver #LR1110

nRF24L01+ Transceiver 2.4GHz Evaluation Board #commonpartslibrary #developmentboard #rfevaluation #kits #transceiver

BSS138 Logic-Level Translator Interface Evaluation Board #Development-Board #Evaluation-Board #BSS138

BSS138 Logic-Level Translator Interface Evaluation Board #commonpartslibrary #evaluationboard #developmentboard

ATmega328 Data Logger Memory Evaluation Board #ATmega328 #part #Evaluationboard

nRF9160 - Transceiver 700MHz ~ 2.2GHz Evaluation Board #commonpartslibrary #integratedcircuit #evaluationboard #transceiver #module

QTR-8AQRE1113GR series Phototransistor Sensor Evaluation Board QTR-8A REFLECTANCE SENSOR ARRAY QTR-8A

PCA9306 - Logic-Level Translator Interface Evaluation Board #Evaluation-Board #Module #part

- SARA-R510S-01B Cellular Development Platform Evaluation Board #commonpartslibrary #developmentboard #boron

MP3 Player Audio Arduino Platform Evaluation Expansion Board #commonpartslibrary #developmentboard #mp3 #arduino

OPA344 MicroAmplifier™ Electret Microphone Audio Evaluation Board #module #Micro-Amplifier #microphone

- nRF52840 Transceiver; Bluetooth® 5 2.4GHz Evaluation Board #DevelopmentBoard #EvaluationBoard #RF #Transceiver #NRF52840

AS5048 - Magnetic, Rotary Position Sensor Evaluation Board