Pressure Sensors WF183DF 07BA LGA8 DT&R LGA-8_L3.8-W3.6-P0.90-TL_WF183D LCSC Part Number: C2886646 JLCPCB Part Class: Extended Part Manufactured by WF(伟烽)

Pressure Sensors WF183DB 11BA LGA8 DT&R LGA-8_L3.8-W3.6-P0.90-TL LCSC Part Number: C3001194 JLCPCB Part Class: Extended Part Manufactured by WF(伟烽)

Pressure Sensors WF183DB 07BA LGA8 DT&R LGA-8_L3.8-W3.6-P0.90-TL_WF183D LCSC Part Number: C3001655 JLCPCB Part Class: Extended Part Manufactured by WF(伟烽)

FLASH - NOR Memory IC 128Mbit SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC

FLASH - NOR Memory IC 128Mbit SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC #commonpartslibrary #integratedcircuit #memory

FLASH - NOR Memory IC 128Mbit SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC #CommonPartsLibrary #IntegratedCircuit #Memory #W25Q128

FLASH - NOR Memory IC 128Mbit SPI - Quad I/O, QPI, DTR 133 MHz 8-WSON (6x5) #commonpartslibrary #integratedcircuit #memory #nor

FLASH - NOR Memory IC 128Mbit SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC #CommonPartsLibrary #IntegratedCircuit #memory #W25Q128

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O, QPI, DTR 133 MHz 6 ns 8-WSON (6x5) #commonpartslibrary #integratedcircuit #memory #nor

FLASH - NOR Memory IC 128Mb (16M x 8) SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC 128M-bit Serial Flash Memory with uniform 4KB sectors and Dual/Quad SPI Winbond W25Q128JV is a 128-Mbit (16 MB) serial NOR Flash memory device designed for code and data storage in embedded systems. It supports standard SPI, Dual SPI, Quad SPI (QSPI), and Dual/Quad Peripheral Interface (DPI/QPI) modes, enabling high-speed data transfer rates up to 133 MHz clock operation and up to 532 MB/s equivalent throughput in Quad I/O DTR mode. The device supports Execute-In-Place (XIP), allowing processors and microcontrollers to run code directly from external flash memory without copying it to RAM. Features include 4 KB sector erase, 32 KB and 64 KB block erase, page programming, hardware/software write protection, security registers, JEDEC identification, SFDP support, suspend/resume operations, and low-power standby modes. Suitable for microcontrollers, FPGA configuration storage, IoT devices, industrial controllers, networking equipment, consumer electronics, and embedded systems requiring reliable non-volatile memory. Search Keywords: W25Q128JV, Winbond flash memory, SPI NOR Flash, QSPI Flash, Quad SPI memory, Serial Flash memory, 128Mbit Flash, 16MB Flash memory, Execute In Place XIP, external MCU flash, ESP32 flash memory, FPGA configuration memory, NOR flash storage, W25Q128, Dual SPI Flash, Quad I/O Flash, embedded nonvolatile memory, serial flash IC Hashtags: #W25Q128JV #Winbond #NORFlash #SPIMemory #QSPI #SerialFlash #FlashMemory #EmbeddedSystems #Microcontroller #ESP32 #FPGA #NonVolatileMemory #XIP #IoT #ElectronicsDesign #MemoryIC #FirmwareStorage #QuadSPI #EmbeddedHardware #ElectronicComponents

The CH9102X is a high-speed USB-to-UART bridge IC developed by WCH (Jiangsu Qinheng Microelectronics). It enables seamless communication between a USB host and UART-based embedded systems, making it ideal for programming, debugging, firmware updates, and serial data communication. The device integrates a USB 2.0 Full-Speed interface, an internal clock, power-on reset, and firmware, eliminating the need for an external crystal oscillator. The CH9102X variant supports 3.3 V UART I/O and is widely used on development boards such as ESP32 and other MCU-based designs. Key Features USB 2.0 Full-Speed (12 Mbps) compliant device interface USB-to-UART bridge supporting baud rates from 50 bps to 4 Mbps 3.3 V UART I/O (CH9102X variant) Integrated clock oscillator (no external crystal required) Built-in power-on reset circuit Hardware full-duplex UART with independent TX/RX buffers Supports 5, 6, 7, or 8 data bits Supports None, Odd, Even, Mark, and Space parity Supports RTS/CTS hardware flow control Supports MODEM signals: RTS, CTS, DTR, DSR, DCD, and RI TNOW output for automatic RS-485 transmit/receive control Compatible with built-in CDC drivers and vendor VCP drivers on major operating systems Available in compact RoHS-compliant QFN packages #CH9102X #USBtoUART #USBBridge #UART #SerialConverter #WCH #USB20 #EmbeddedSystems #ESP32 #MCU #RS485 #FirmwareUpdate #Debugging #IoT #PCBDesign

The W25Q02JVSFIM from Winbond Electronics is a 2G-bit (256M x 8) Serial NOR Flash Memory device designed for high-density non-volatile data storage applications. It supports high-speed SPI, Dual/Quad SPI, QPI, and DTR interfaces, providing fast data transfer and efficient memory access for embedded systems. The device operates from a 2.7V to 3.6V supply voltage and is available in a 16-pin SOIC surface-mount package. It is suitable for applications such as firmware storage, boot code memory, industrial controllers, IoT devices, automotive electronics, and embedded systems requiring large-capacity reliable flash memory. Key Features Memory Density: 2G-bit Serial NOR Flash (256M x 8) Flash Technology: Single-Level Cell (SLC) NOR Flash Interface Support: Standard SPI, Dual SPI, Quad SPI, QPI, and DTR modes High-Speed Clock Frequency: Up to 133 MHz operation Fast Access Time: Approximately 7.5 ns Supply Voltage Range: 2.7V to 3.6V Non-Volatile Data Storage: Retains stored data without power Memory Organization: 256M x 8-bit architecture Package Type: 16-pin SOIC (7.50 mm width) surface-mount package Operating Temperature Range: -40°C to +85°C Page Program Time: Approximately 3.5 ms Applications: Embedded firmware storage, BIOS/boot memory, industrial equipment, IoT devices, and consumer electronics Hashtags #W25Q02JVSFIM #Winbond #SerialFlashMemory #NORFlash #SPIFlash #QuadSPI #QPI #DTR #EmbeddedSystems #NonVolatileMemory #FlashMemory #FirmwareStorage #IoT #IndustrialElectronics #Semiconductor #MemoryIC

Linear Voltage Regulators (LDO) MC33269DTRK-012G TO-252-3_L6.5-W5.8-P4.58-LS9.8-BR LCSC Part Number: C903946 JLCPCB Part Class: Extended Part Manufactured by onsemi(安森美)

USB to Serial Interface, SSOP-28 FTDI USB Serial SSOP*5.3x10.2mm*P0.65mm* The FT232RL is a full-speed USB 2.0 to asynchronous serial data transfer IC. It integrates all the necessary USB protocol handling and UART interface logic, making it very easy to add USB connectivity to embedded devices without requiring complex firmware development. It is commonly used in development boards (like Arduino clones), USB-to-TTL converters, and debugging interfaces. Key Features USB Interface Fully compliant with USB 2.0 Full-Speed (12 Mbps) Integrated USB transceiver (no external components required) Supports USB suspend/resume modes Internal EEPROM for storing USB descriptors (no external EEPROM needed) Serial (UART) Interface Supports standard UART communication (TX, RX) Configurable baud rates from 300 bps up to 3 Mbps Supports hardware flow control (RTS/CTS, DTR/DSR) Bit-bang mode for simple GPIO control Integrated Components Built-in clock generator (no external crystal required) Internal EEPROM for configuration Integrated voltage regulator (3.3V output available for external use) Power Features Operates from 3.3V to 5V Can be powered directly from USB (bus-powered) Low power consumption with sleep mode Driver Support Virtual COM Port (VCP) drivers available for: Windows Linux macOS Also supports direct D2XX driver for advanced applications Package Typically available in SSOP-28 package Common Applications USB-to-serial converters (TTL/RS232) Microcontroller programming and debugging Embedded system communication Industrial and instrumentation interfaces