DIN 8 (Full Size 13.2MM) Female Plug Connector 90° Panel PCB at horizontal panel position

96 Position Din Connector Header, Male Pins Through Hole, Right Angle #CommonPartsLibrary #Connector #Backplane-Connector #DIN-41612

LVDS Digital Isolator 5700Vrms 4 Channel 2.5Gbps 40kV/µs CMTI 32-WFQFN Exposed Pad, CSP The ADN4624 is a quad-channel, signal isolated, low voltage differential signaling (LVDS) buffer that operates at up to 2.5 Gbps with very low jitter. The device integrates Analog Devices, Inc., iCoupler® technology, enhanced for high speed operation to provide drop-in galvanic isolation of LVDS signal chains. AC coupling and/or level shifting to the LVDS receivers and from the LVDS drivers allows isolation of other high speed signals such as current mode logic (CML). The ADN4624 includes a refresh mechanism to monitor the input and output states and ensure they remain the same in the absence of data transitions (for example, at power-on). For lower power consumption and high speed operation with low jitter, the LVDS and isolator circuits rely on 1.8 V supplies. The ADN4624 is fully specified over a wide industrial temperature range and is available in a 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance (for 5.7 kV rms or 8 kVPEAK surge and impulse voltages and reinforced insulation at ac mains voltages) or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance (for basic/functional isolation). FEATURES ► 5.7 kV rms and 1.5 kV rms LVDS isolators ► Complies with TIA/EIA-644-A LVDS signal levels ► Quad-channel configuration ► Any data rate up to 2.5 Gbps switching with low jitter ► 10 Gbps total bandwidth across four channels ► 2.15 ns typical propagation delay ► Typical jitter: 0.82 ps rms random, 40 ps total peak ► Lower power 1.8 V supplies ► ±8 kV IEC 61000-4-2 ESD protection across isolation barrier ► High common-mode transient immunity: 100 kV/μs typical ► Safety and regulatory approvals (28-lead SOIC_W_FP package) ► UL (pending): 5700 V rms for 1 minute per UL 1577 ► CSA Component Acceptance Notice 5A (pending) ► VDE certificate of conformity (pending) ► DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 ► VIORM = 849 VPEAK (working voltage) ► Enable or disable refresh (low speed output correctness check) ► Operating temperature range: −40°C to +125°C ► 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance APPLICATIONS ► Isolated video and imaging data ► Analog front-end isolation ► Data plane isolation ► Isolated high speed clock and data links ► Multi-gigabit serialization/deserialization (SERDES) ► Board-to-board optical replacement (for example, short reach fiber) #CommonPartsLibrary #Isolator #ADN4624BCPZ #AnalogDevices #LVDS #DigitalIsolator #GalvanicIsolation #HighSpeedCommunication #SERDES

5 Position Circular Connector Receptacle, Female Sockets Solder The SDS-50J is a 5-position, right-angle PCB-mount DIN receptacle connector designed for reliable signal and power connections in audio, industrial control, instrumentation, and legacy DIN-based electronic equipment. It features a standard 180° DIN pin arrangement, through-hole mounting, and durable thermoplastic construction for secure board-level integration. The connector is part of the SDS-J series and is suitable for applications requiring dependable mating cycles and long-term mechanical stability. Key Features 5-pin standard DIN receptacle (180° pin configuration) Right-angle, through-hole PCB mounting Female socket contacts Rated up to 100 VAC Current rating up to 1–2 A (depending on operating conditions) Low contact resistance (20 mΩ typical) High insulation resistance (100 MΩ minimum) 500 VAC dielectric withstand voltage Operating temperature range: -40°C to +85°C UL94V-0 flame-retardant housing RoHS compliant Designed for approximately 1,000 mating cycles #SDS50J #DINConnector #RightAngleConnector #PCBMount #ThroughHole #CircularConnector #AudioConnector #IndustrialElectronics #CUIDevices #SameSky #ElectronicComponents #InterconnectSolutions

96 Position Din Connector Receptacle, Female Sockets Gold Through Hole #CommonPartsLibrary #Connector #DIN-41612

96 Position Din Connector Plug, Male Pins Gold or Gold-Palladium Through Hole #commonpartslibrary #connector

5.7 kV RMS/1.5 kV RMS, Quad-Channel LVDS 2.5 Gigabit Isolator (0 Reverse Channels) LVDS Digital Isolator 5700Vrms 4 Channel 2.5Gbps 40kV/µs CMTI 28-BSSOP (0.295", 7.50mm Width) The ADN4624 is a quad-channel, signal isolated, low voltage differential signaling (LVDS) buffer that operates at up to 2.5 Gbps with very low jitter. The device integrates Analog Devices, Inc., iCoupler® technology, enhanced for high speed operation to provide drop-in galvanic isolation of LVDS signal chains. AC coupling and/or level shifting to the LVDS receivers and from the LVDS drivers allows isolation of other high speed signals such as current mode logic (CML). The ADN4624 includes a refresh mechanism to monitor the input and output states and ensure they remain the same in the absence of data transitions (for example, at power-on). For lower power consumption and high speed operation with low jitter, the LVDS and isolator circuits rely on 1.8 V supplies. The ADN4624 is fully specified over a wide industrial temperature range and is available in a 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance (for 5.7 kV rms or 8 kVPEAK surge and impulse voltages and reinforced insulation at ac mains voltages) or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance (for basic/functional isolation). FEATURES ► 5.7 kV rms and 1.5 kV rms LVDS isolators ► Complies with TIA/EIA-644-A LVDS signal levels ► Quad-channel configuration ► Any data rate up to 2.5 Gbps switching with low jitter ► 10 Gbps total bandwidth across four channels ► 2.15 ns typical propagation delay ► Typical jitter: 0.82 ps rms random, 40 ps total peak ► Lower power 1.8 V supplies ► ±8 kV IEC 61000-4-2 ESD protection across isolation barrier ► High common-mode transient immunity: 100 kV/μs typical ► Safety and regulatory approvals (28-lead SOIC_W_FP package) ► UL (pending): 5700 V rms for 1 minute per UL 1577 ► CSA Component Acceptance Notice 5A (pending) ► VDE certificate of conformity (pending) ► DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 ► VIORM = 849 VPEAK (working voltage) ► Enable or disable refresh (low speed output correctness check) ► Operating temperature range: −40°C to +125°C ► 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance APPLICATIONS ► Isolated video and imaging data ► Analog front-end isolation ► Data plane isolation ► Isolated high speed clock and data links ► Multi-gigabit serialization/deserialization (SERDES) ► Board-to-board optical replacement (for example, short reach fiber) #CommonPartsLibrary #ADN4624BRNZ #DigitalIsolator #LVDS #AnalogDevices #HighSpeedInterface #GalvanicIsolation #LVDSIsolator #DigitalIsolation #IndustrialElectronics #HighSpeedData #SERDES #SignalIntegrity #EmbeddedSystems #ElectronicsDesign #InterfaceICs

Through hole IDC box header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows

8 Position Circular Connector Receptacle, Female Sockets Solder Mini DIN Receptacle Connector for wire-to-board signal connections, featuring 8 positions in a right-angle, through-hole board-mount configuration with a 6.5 mm centerline. This shielded circular Mini DIN receptacle is rated for 30 VAC operating voltage and 0.5 A maximum contact current, with keyed mating alignment and an operating temperature range of −55°C to +105°C. #MiniDIN #DINConnector #CircularConnector #WireToBoard #BoardMount #RightAngle #ThroughHole #8Position #ShieldedConnector #SignalConnector #TEConnectivity

OPSCO SK6812MINI RGBW is an intelligent addressable RGBW LED with an integrated control IC inside a compact 3.7 mm × 3.7 mm surface-mount package. It combines red, green, blue, and dedicated white LEDs with a built-in constant-current driver, allowing individual pixel control through a single-wire serial data interface. Each LED contains an internal data latch, PWM controller, signal reshaping circuit, and cascade output, enabling long chains of individually addressable LEDs without additional external components. Compatible with SK6812 and similar NeoPixel-style protocols, it is widely used in LED displays, decorative lighting, wearable electronics, smart home devices, gaming peripherals, indicators, keyboards, and embedded lighting applications. Features include serial data input/output (DIN/DOUT), integrated PWM dimming, high color consistency, and easy daisy-chain connectivity. Search Keywords: SK6812MINI, SK6812 MINI, RGBW LED, addressable RGBW LED, intelligent LED, NeoPixel compatible LED, smart RGB LED, serial controlled LED, individually addressable LED, DIN DOUT LED, programmable LED, LED pixel, embedded lighting LED, digital RGBW LED, SMD RGBW LED, LED strip pixel, SK6812 LED driver Hashtags: #SK6812MINI #SK6812 #RGBW #AddressableLED #SmartLED #NeoPixel #DigitalLED #LEDPixel #EmbeddedLighting #LEDDisplay #Arduino #ESP32 #IoT #WearableElectronics #PCBDesign #LightingControl #SMDLED #ElectronicComponents #LEDDriver #RGBLEDProgrammable LED; RGBW; SMD; 3535,PLCC4; 3.75.5VDC; 3800-4200K

Power Supply Encapsulated PCB 12V 30W IRM-30 Series is a compact 30W AC-DC encapsulated power supply module from Mean Well designed for direct PCB mounting or screw-terminal installation. The module accepts a universal AC input range of 85VAC to 305VAC and provides regulated DC outputs with high efficiency up to 90%. It features Class II isolation, built-in EMI filtering compliant with EN55032 Class B without additional external components, and comprehensive protection functions including short-circuit, overload, and over-voltage protection. With no-load power consumption below 0.1W, reinforced insulation, and a wide operating temperature range, the IRM-30 series is ideal for industrial automation, instrumentation, embedded electronics, smart devices, networking equipment, IoT products, factory automation systems, and handheld electronic devices. Search Keywords: IRM-30, Mean Well IRM-30, AC DC power module, encapsulated power supply, PCB mount power supply, industrial power module, 30W power supply, universal input power supply, AC to DC converter, embedded power supply, isolated power module, IRM-30-5, IRM-30-12, IRM-30-24, IRM-30-48, low standby power supply, Class II power supply, industrial automation power supply, DIN power module alternative, compact AC DC converter Hashtags: #IRM30 #MeanWell #ACDCConverter #PowerSupply #PowerModule #PCBMountPowerSupply #IndustrialElectronics #EmbeddedSystems #FactoryAutomation #IoT #PowerElectronics #SwitchingPowerSupply #SMPS #ElectronicComponents #PCBDesign #UniversalInput #IsolationPowerSupply #IndustrialAutomation #LowPowerConsumption #MeanWellPowerSupply

Circular DIN Connectors 4P R/A RULL SHIELD GOLD PLATED 4 Position Circular Connector Receptacle, Female Sockets Solder

Through hole IDC box header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows

Through hole IDC box header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows

Through hole IDC box header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows

24 Bit Analog to Digital Converter 3, 5 Input 1 Sigma-Delta 24-PDIP AD7714 DIP-24 The AD7714 is a complete analog front end for low-frequency measurement applications. The device accepts low level signals directly from a transducer and outputs a serial digital word. It employs a sigma-delta conversion technique to realize up to 24 bits of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an onchip digital filter. The first notch of this digital filter can be programmed via the on-chip control register allowing adjustment of the filter cutoff and settling time. The part features three differential analog inputs (which can also be configured as five pseudo-differential analog inputs) as well as a differential reference input. It operates from a single supply (+3␣ V or +5␣ V). The AD7714 thus performs all signal conditioning and conversion for a system consisting of up to five channels Charge Balancing ADC 24 Bits No Missing Codes 0.0015% Nonlinearity Five-Channel Programmable Gain Front End Gains from 1 to 128 Can Be Configured as Three Fully Differential Inputs or Five Pseudo-Differential Inputs Three-Wire Serial Interface SPI™, QSPI™, MICROWIRE™ and DSP Compatible 3 V (AD7714-3) or 5 V (AD7714-5) Operation Low Noise (<150 nV rms) Low Current (350␣ mA typ) with Power-Down (5 mA typ) AD7714Y Grade: +2.7 V to 3.3 V or +4.75 V to +5.25 V Operation 0.0010% Linearity Error –408C to +1058C Temperature Range Schmitt Trigger on SCLK and DIN Low Current (226␣ mA typ) with Power-Down (4 mA typ) Lower Power Dissipation than Standard AD7714 Available in 24-Lead TSSOP Package Low-Pass Filter with Programmable Filter Cutoffs Ability to Read/Write Calibration Coefficients APPLICATIONS Portable Industrial Instruments Portable Weigh Scales Loop-Powered Systems Pressure Transducers #CommonPartsLibrary #IntegratedCircuit #AD7714

TE Connectivity Eurocard 48 Way 2.54mm Pitch, Type C Class C2, 3 Row (A/B/C), Right Angle DIN 41612 Connector, Plug #CommonPartsLibrary #Connector

Resistor Axial DIN0204 series, Horizontal, Pitch = 5.08mm, 0.167W, Length = 3.6mm Diameter = 1.6mm #generic-part-template #axial