Seeed Studio CAN Bus Breakout Board is an expansion board compatible with all XIAO development boards. The integration of the MCP2515 controller and SN65HVD230 transceiver chips on the expansion board ensures seamless and efficient communication over the CAN Bus.

Sub layout for Isolation circuit for CAN Bus based on ISO1050 IC #Module

16 MHz XO (Standard) CMOS Oscillator 1.6V ~ 3.6V Standby (Power Down) 4-SMD, No Lead #oscillators #SMD #XO #16MHz

VG2520CAN 30.720000M-CJGNBB OSC-SMD_4P-L2.5-W2.0-BL LCSC Part Number: C1677921 JLCPCB Part Class: undefined Manufactured by EPSON(爱普生)

SG5032CAN 27.000000M-TJGA3 OSC-SMD_4P-L5.0-W3.2-BL_A LCSC Part Number: C1988655 JLCPCB Part Class: Extended Part Manufactured by EPSON(爱普生)

SG5032CAN 24.000000M-TJGA3 OSC-SMD_4P-L5.0-W3.2-BL_A LCSC Part Number: C2650685 JLCPCB Part Class: Extended Part Manufactured by EPSON(爱普生)

SG5032CAN 48.000000M-TJGA3 OSC-SMD_4P-L5.0-W3.2-BL_A LCSC Part Number: C1988716 JLCPCB Part Class: Extended Part Manufactured by EPSON(爱普生)

SG5032CAN 16.000000M-TJGA3 CRYSTAL-SMD_4P-L5.0-W3.2-BL LCSC Part Number: C1988199 JLCPCB Part Class: Extended Part Manufactured by EPSON(爱普生)

Oscillators SG5032CAN 8.000000MHz-TJGA3 OSC-SMD_4P-L5.0-W3.2-BL_SG5032 LCSC Part Number: C1988053 JLCPCB Part Class: Extended Part Manufactured by EPSON(爱普生)

SG5032CAN 14.745600M-TJGA3 OSC-SMD_4P-L5.0-W3.2-BL_A LCSC Part Number: C1988659 JLCPCB Part Class: Extended Part Manufactured by EPSON(爱普生)

The NE555 devices are precision timing circuits capable of producing accurate time delays or oscillation. In time-delay or monostable operating modes, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle are controlled independently with two external resistors and a single external capacitor. Each timer has a trigger level equal to approximately one-third of the supply voltage and a threshold level equal to approximately two-thirds of the supply voltage. These levels can be altered by use of the control voltage pin (CONT). When the trigger input (TRIG) is less than the trigger level, the flip-flop is set and the output goes high. If TRIG is greater than the trigger level and the threshold input (THRES) is greater than the threshold level, the flip-flop is reset and the output is low. The reset input (RESET) overrides all other inputs and is used to initiate a new timing cycle. If RESET is low, the flip-flop is reset and the output is low. Whenever the output is low, a lowimpedance path is provided between the discharge pin (DISCH) and the ground pin (GND). Tie all unused inputs to an appropriate logic level to prevent false triggering. The output circuit is capable of sinking or sourcing current up to 200mA. Operation is specified for supplies of 5V to 15V. With a 5V supply, output levels are compatible with TTL inputs. Features - Timing from microseconds to hours - Astable or monostable operation - Adjustable duty cycle - TTL-compatible output can sink or source up to 200mA - On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. Applications - Pulse-shaping circuits - Missing-pulse detectors - Pulse-width modulators - Pulse-position modulators - Sequential timers - Pulse generators -F requency dividers - Industrial controls