IC RF TxRx + MCU 802.15.4, Bluetooth Bluetooth v5.4, Matter, Thread, Zigbee® 47-XFBGA, WLCSP # NRF54L15-CAAA-R7 ## General Description The NRF54L15-CAAA-R7 is an ultra-low-power wireless System-on-Chip (SoC) developed by [Nordic Semiconductor](https://www.nordicsemi.com?utm_source=chatgpt.com) for advanced Internet of Things (IoT), industrial, medical, smart home, and wireless sensing applications. The device integrates a high-performance Arm Cortex-M33 processor, a dedicated RISC-V coprocessor, large embedded memory resources, and a multiprotocol 2.4 GHz radio subsystem into a compact package. It is designed to provide exceptional energy efficiency, robust wireless connectivity, and enhanced security while supporting modern wireless standards including Bluetooth® Low Energy, Matter, Thread, Zigbee®, Bluetooth Mesh, Amazon Sidewalk, and proprietary 2.4 GHz protocols. The device is optimized for battery-powered applications requiring extended operating life, high processing capability, and scalable connectivity solutions. ## Key Features ### Processing Architecture * 128 MHz Arm® Cortex®-M33 application processor * Integrated 128 MHz RISC-V coprocessor * TrustZone® security architecture ### Memory Resources * 1.5 MB Non-Volatile Memory (NVM) * 256 KB RAM ### Wireless Connectivity * Multiprotocol 2.4 GHz RF transceiver * Bluetooth® Low Energy support * Matter support * Thread support * Zigbee® support * Bluetooth Mesh support * Amazon Sidewalk support * Proprietary 2.4 GHz protocol support * Bluetooth Channel Sounding capability * Compatible with Wi-Fi companion devices ### RF Performance * Data rates up to 4 Mbps * Output power up to +8 dBm * High receiver sensitivity for extended wireless range ### Security Features * Hardware cryptographic engine * Side-channel attack protection * Tamper detection mechanisms * Secure boot and secure firmware update support ### Peripheral Interfaces * SPI * I²C (TWI) * UART * I²S * GPIO * ADC * PWM * PDM * NFC * QDEC ### Power Characteristics * Ultra-low-power operation * Optimized sleep modes * Battery-powered application support * Operating supply voltage from 1.7 V to 3.6 V ### Package Information * WLCSP package * Surface-mount technology * Industrial operating temperature support ## Applications * Smart Home Devices * Industrial IoT Systems * Wearable Electronics * Medical and Healthcare Devices * Asset Tracking Solutions * Wireless Sensors * Building Automation Systems * Smart Lighting Controls * Consumer Electronics * Connected Peripheral Devices #NordicSemiconductor #nRF54L15 #NRF54L15CAAAR7 #BluetoothLE #Matter #Thread #Zigbee #IoT #WirelessSoC #EmbeddedSystems #IndustrialIoT #SmartHome #LowPowerDesign #CortexM33 #RISCV

IC RF TxRx Only General ISM > 1GHz LoRaWAN 32-VFQFN Exposed Pad LR2021IMLTRT is a fourth-generation, long-range, low-power, multi-band LoRa® RF transceiver from Semtech, designed for IoT, LPWAN, satellite communication, smart metering, industrial automation, asset tracking, and wireless sensor networks. It supports operation across sub-GHz and 2.4 GHz frequency bands, offering excellent receiver sensitivity, high transmit power, and compatibility with multiple wireless protocols including LoRaWAN®, Bluetooth® LE PHY, Zigbee™, Thread®, Amazon Sidewalk, and Wi-SUN. Key Features Multi-band operation: 150 MHz to 960 MHz and 1.5 GHz to 2.5 GHz Supports LoRa®, LoRaWAN®, LR-FHSS, FLRC, FSK, GFSK, GMSK, MSK, OOK, and O-QPSK Maximum data rate up to 2.6 Mbps High receiver sensitivity up to -141.5 dBm (LoRa mode) Transmit power up to +22 dBm (sub-GHz) Compatible with Bluetooth® LE 5.0 PHY, Thread®, Zigbee™, Amazon Sidewalk, Sigfox, Wi-SUN, and Z-Wave® Ultra-low power consumption with 470 nA sleep current Operating voltage range: 1.8 V to 3.7 V SPI interface with programmable GPIOs Operating temperature range: -40°C to +85°C Compact 32-pin QFN (5 mm × 5 mm) package for space-constrained designs. Hashtags #Semtech #LR2021IMLTRT #LoRa #LoRaWAN #RFTransceiver #WirelessCommunication #IoT #LPWAN #BluetoothLE #Zigbee #Thread #WiSUN #AmazonSidewalk #AssetTracking #SmartMetering #IndustrialIoT #SatelliteCommunication #LowPowerDesign #EmbeddedSystems #RFIC

20.5dBm ESP32-C3 Chip 2.4GHz VFQFN-32-EP WiFi Modules ROHS RF Transceiver ICs ESP32-C3-WROOM-02-N4 BULETM-SMD_ESPRESSIF_ESP32-C3-WROOM-02-N4-4MB LCSC Part Number: C2934560 Espressif ESP32-C3-WROOM-02 wireless MCU module, based on ESP32-C3 32-bit RISC-V single-core processor up to 160MHz, supports 2.4GHz Wi-Fi 802.11b/g/n and Bluetooth LE 5.0 with Bluetooth mesh, 4MB or 8MB SPI flash options, 384KB ROM, 400KB SRAM and 8KB RTC SRAM, up to 15 GPIOs, SPI, UART, I2C, I2S, LED PWM, USB Serial/JTAG, ADC, timers and watchdogs, integrated 40MHz crystal oscillator, 3.0V to 3.6V supply voltage, on-board PCB antenna, RoHS/REACH compliant, 18.0 x 20.0 x 3.2mm module size. Search Keywords: ESP32-C3-WROOM-02, ESP32-C3-WROOM-02-N4, ESP32-C3-WROOM-02-H4, ESP32-C3-WROOM-02-N8, Espressif ESP32-C3-WROOM-02, ESP32-C3 WiFi Bluetooth module, ESP32-C3 RISC-V module, WiFi BLE 5 module, 802.11bgn module, Bluetooth mesh module, ESP32-C3 PCB antenna module, ESP32-C3 4MB flash module, ESP32-C3 8MB flash module Hashtags: #ESP32C3WROOM02 #ESP32C3WROOM02N4 #ESP32C3WROOM02H4 #ESP32C3WROOM02N8 #EspressifESP32C3 #ESP32C3 #WiFiBluetoothModule #WiFiModule #BluetoothLEModule #BLE5Module #RISCVMCU #IoTModule #PCBantenna #80211bgn

WiFi Modules ESP32-S3-MINI-1-N4R2 BULETM-SMD_ESP32-S3-MINI-1-N8 LCSC Part Number: C3013941 JLCPCB Part Class: Extended Part Manufactured by ESPRESSIF Espressif ESP32-S3-MINI-1/1U Wi-Fi and Bluetooth LE MCU module based on ESP32-S3, dual-core 32-bit Xtensa LX7 processor up to 240MHz, supports 2.4GHz Wi-Fi and Bluetooth LE, 8MB Quad SPI flash, optional 2MB Quad SPI PSRAM, up to 80MHz SPI flash clock, integrated low-power co-processor, -40°C to +85°C operating temperature, compact SMD module for IoT, smart home, embedded systems and wearable electronics; ESP32-S3-MINI-1 includes PCB antenna, ESP32-S3-MINI-1U supports external antenna connector. Search Keywords: ESP32-S3-MINI-1, ESP32-S3-MINI-1U, ESP32-S3-MINI-1-N8, ESP32-S3-MINI-1-N4R2, ESP32-S3-MINI-1U-N8, ESP32-S3-MINI-1U-N4R2, Espressif ESP32-S3-MINI, ESP32-S3 WiFi Bluetooth module, ESP32-S3 BLE module, ESP32-S3 MCU module, ESP32-S3-MINI 8MB flash, ESP32-S3-MINI 2MB PSRAM, ESP32-S3-MINI PCB antenna, ESP32-S3-MINI external antenna, ESP32-S3-MINI-1U antenna connector, ESP32-S3 SMD module, ESP32-S3 IoT module, ESP32-S3-MINI datasheet Hashtags: #ESP32S3MINI1 #ESP32S3MINI1U #ESP32S3MINI1N8 #ESP32S3MINI1N4R2 #ESP32S3MINI1UN8 #ESP32S3MINI1UN4R2 #Espressif #ESP32S3 #ESP32Module #WiFiModule #BluetoothLEModule #BLEModule #MCUModule #IoTModule #SMDModule #PCBantenna #ExternalAntenna #XtensaLX7 #8MBFlash #2MBPSRAM

TPS62740DSST WSON-12_L3.0-W2.0-P0.5-BL-EP LCSC Part Number: C2659003 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TPS62740/TPS62742 ultra-low-power step-down DC/DC converter, 2.2V to 5.5V input voltage range, 360nA typical quiescent current, up to 90% efficiency at 10µA load current, up to 300mA output current for TPS62740 and 400mA for TPS62742, DCS-Control architecture, up to 2MHz switching frequency, 16 selectable output voltages from 1.8V to 3.3V in 100mV steps, power-good output, slew-rate controlled load switch, output discharge function, optimized for 2.2µH inductor and 10µF output capacitor, small 2 x 3mm WSON package, suitable for Bluetooth Low Energy, RF4CE, Zigbee, industrial metering and energy harvesting applications. Search Keywords: TPS62740, TPS62742, Texas Instruments TPS62740, Texas Instruments TPS62742, TI TPS62740, TI TPS62742, TPS6274x buck converter, TPS62740 step down converter, TPS62742 step down converter, ultra low Iq buck converter, 360nA quiescent current converter, low power DC DC converter, energy harvesting buck converter, Bluetooth low energy buck converter, Zigbee power converter, 300mA buck converter, 400mA buck converter, 2x3mm WSON buck converter, TPS62740 datasheet, TPS62742 datasheet Hashtags: #TPS62740 #TPS62742 #TPS6274x #TexasInstrumentsTPS62740 #TexasInstrumentsTPS62742 #TIBuckConverter #StepDownConverter #BuckConverter #DCDCConverter #UltraLowIqConverter #360nAIq #LowPowerConverter #EnergyHarvestingConverter #BluetoothLEConverter #ZigbeeConverter #RF4CEConverter #300mABuckConverter #400mABuckConverter #DCSControl #WSONPackage

Bluetooth Modules (802.15.1) BLUETOOTH-SERIAL-HC-06 #Module

The NRF52832-QFAB-R is a multiprotocol wireless system-on-chip manufactured by Nordic Semiconductor, designed for low-power Bluetooth and embedded wireless communication applications. This highly integrated microcontroller combines a powerful ARM Cortex-M4 processor with advanced wireless connectivity, low-energy operation, and extensive peripheral functionality within a compact surface-mount package. The device supports Bluetooth Low Energy, proprietary wireless protocols, and advanced embedded processing capabilities, making it suitable for IoT devices, wearable electronics, industrial sensors, medical equipment, smart home products, and battery-powered wireless systems. Its integrated radio architecture and optimized low-power design enable extended battery life while maintaining reliable wireless communication performance. The NRF52832-QFAB-R integrates flash memory, RAM resources, analog and digital peripherals, security features, and flexible GPIO functionality to simplify system-level design and reduce external component requirements. The device is widely used in wireless sensor networks, portable electronics, beacon systems, HID devices, and low-power connected embedded applications. Engineering Specification Device Type Wireless microcontroller system-on-chip Processor Architecture ARM Cortex-M4 embedded processor Wireless Connectivity Bluetooth Low Energy and proprietary wireless communication support Radio Features Integrated low-power wireless transceiver architecture Memory Resources Integrated flash memory and RAM Power Characteristics Ultra-low-power operation optimized for battery-powered devices Communication Interfaces SPI I2C UART PWM ADC GPIO NFC support Wireless Features Low-energy wireless networking and secure communication capability Security Features Hardware-based security and encryption support Processing Features Embedded DSP and floating-point processing capability Package Type QFN surface-mount package Mounting Style Surface mount technology Reliability Features Industrial-grade wireless and embedded system reliability Applications IoT devices Wearable electronics Wireless sensor nodes Smart home systems Medical electronics Industrial automation Beacon devices Portable electronics Human interface devices Embedded wireless systems Manufacturer Nordic Semiconductor #commonpartslibrary #nrf52 #nrf52832 #wirelessmcu #bluetoothlowenergy #iot #embeddedhardware #nordicsemi #wirelesscommunication #microcontroller #surfaceountcomponents #wearableelectronics #smarthome #industrialelectronics #lowpowerelectronics

The ESP32-C3FH4 is a highly integrated wireless microcontroller designed for Internet of Things, smart devices, industrial automation, consumer electronics, and embedded connectivity applications. It combines a low-power RISC-V processor with integrated Wi-Fi and Bluetooth Low Energy connectivity, providing a cost-effective and secure platform for wireless communication and edge computing. The device incorporates embedded flash memory, advanced security features, low-power operating modes, and a rich set of peripheral interfaces, making it suitable for battery-powered and always-connected systems. Its compact design and comprehensive software ecosystem enable rapid development of connected products while maintaining high reliability and energy efficiency. The ESP32-C3FH4 is widely used in smart sensors, home automation devices, wearable electronics, industrial monitoring systems, wireless control modules, and cloud-connected embedded products. Features Integrated RISC-V microcontroller core Built-in Wi-Fi connectivity Integrated Bluetooth Low Energy support Embedded flash memory Low-power operation for battery-powered applications Hardware cryptographic acceleration Secure boot capability Flash encryption support Multiple GPIO interfaces Integrated UART, SPI, I²C, I²S, PWM, and ADC peripherals Real-time processing capability Wireless networking and cloud connectivity support OTA firmware update support Compact surface-mount package Industrial-grade reliability Electrical Characteristics Wireless microcontroller architecture Integrated RF subsystem Low-power operating modes High-performance embedded processing Secure communication support Multi-protocol wireless connectivity Flexible peripheral expansion capability Optimized power consumption for IoT devices Applications Internet of Things devices Smart home automation Wireless sensor networks Industrial monitoring systems Asset tracking devices Wearable electronics Smart appliances Remote control systems Data acquisition platforms Edge computing applications Connected consumer products Embedded wireless gateways Package Information Surface-mount package Compact footprint for embedded applications Suitable for automated assembly processes Optimized thermal and electrical performance PCB-friendly package design #commonpartslibrary #integratedcircuit #microcontroller #wirelessconnectivity #wifi #bluetoothlowenergy #iot #embeddedsystems #espressif #smartdevices #industrialautomation #edgecomputing #wirelessmodule #internetofthings #electronicsdesign #riscv #embeddedelectronics #lowpowerdesign

IC RF TxRx + MCU Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 2.412GHz ~ 2.484GHz 56-VFQFN Exposed Pad The ESP32-S3R8 is a high-performance wireless microcontroller system-on-chip manufactured by Espressif Systems. This device integrates dual-core processing, Wi-Fi connectivity, Bluetooth Low Energy communication, embedded memory resources, and advanced peripheral interfaces within a compact package optimized for embedded and IoT applications. The microcontroller is based on the Xtensa LX7 architecture and is designed to support edge computing, wireless communication, human-machine interfaces, audio processing, AI acceleration, and low-power connected systems. The ESP32-S3R8 includes integrated flash and RAM resources, advanced security functions, vector instruction acceleration, and extensive GPIO/peripheral capability for modern embedded development. The device is widely used in IoT devices, industrial automation systems, smart home equipment, wearable electronics, wireless sensor nodes, edge AI applications, USB-enabled embedded systems, and portable consumer electronics. Its integrated wireless functionality and high processing performance reduce external component count while simplifying system-level design for connected embedded platforms. Engineering Specification Device Type Wireless microcontroller system-on-chip Processor Architecture Dual-core Xtensa LX7 microcontroller architecture Wireless Connectivity Integrated Wi-Fi and Bluetooth Low Energy communication Processing Features High-performance embedded processing with vector instruction acceleration Memory Resources Integrated RAM and embedded memory architecture Communication Interfaces SPI I2C UART I2S USB PWM ADC GPIO interfaces Wireless Features Secure wireless networking and low-power communication support USB Capability Integrated USB communication and device functionality AI and DSP Features Vector instruction support for AI and digital signal processing workloads Security Features Hardware encryption and secure boot support Power Characteristics Low-power operating modes for battery-powered systems Package Type QFN surface-mount package Mounting Style Surface mount technology Applications IoT devices Wireless embedded systems Industrial automation Smart home electronics Edge AI applications Wearable devices Consumer electronics USB-enabled systems Sensor networks Embedded communication platforms Manufacturer Espressif Systems #commonpartslibrary #esp32 #esp32s3 #wirelessmcu #microcontroller #iot #embeddedhardware #wifi #bluetoothlowenergy #espressif #surfaceountcomponents #electronicsdesign #edgeai #wirelesscommunication #consumerelectronics

IC RF TxRx + MCU Bluetooth Bluetooth v5.0 2.4GHz 32-VFQFN Exposed Pad nRF52810-QCAA-R is a multiprotocol ultra-low-power wireless System-on-Chip from Nordic Semiconductor designed for Bluetooth Low Energy and proprietary wireless communication applications. The device integrates a high-performance ARM Cortex-M processor, radio transceiver, memory resources, and peripheral interfaces into a compact package optimized for low-power embedded systems and IoT devices. This SoC supports reliable wireless connectivity with low energy consumption, making it suitable for wearable electronics, wireless sensors, smart home devices, industrial monitoring systems, and battery-powered portable applications. The integrated radio architecture provides stable RF performance with support for advanced wireless features, secure communication, and efficient coexistence in crowded RF environments. The nRF52810-QCAA-R includes multiple GPIOs, serial communication peripherals, timers, PWM functionality, analog interfaces, and low-power operating modes that simplify embedded hardware design and firmware development. Its compact package and optimized power profile make it ideal for space-constrained and energy-sensitive wireless applications. #commonpartslibrary #nordicsemiconductor #bluetoothlowenergy #wirelesssoc #iotdevices #embeddedhardware #rfdesign #lowpowerdesign #wearableelectronics #wirelesscommunication