Bluetooth Low Energy 5.0 transceiver module, nRF52832-based, 1.7-3.6 V supply, 6.5 x 6.5 mm SMD-52 package

Precision, 10-MHz, Low-Noise, Low-Power, RRIO, CMOS Operational Amplifier, SOIC-8 dual opamp SOIC*3.9x4.9mm*P1.27mm*

16 Position Header Connector 0.100" (2.54mm) Through Hole, Right Angle Gold The PPPC082LJBN-RC is a dual-row, right-angle pin header connector intended for through-hole PCB mounting. It uses a standard 2.54 mm pitch with a 2×8 pin configuration and is commonly used for board-to-board or board-to-cable connections. The connector provides stable mechanical support and reliable electrical performance, making it suitable for prototyping, embedded systems, and general-purpose electronic designs. Mechanical Specifications Connector Type: Pin Header Mounting Type: Through-Hole, Right Angle Number of Positions: 16 (2×8) Pitch: 2.54 mm Row Spacing: 2.54 mm Contact Orientation: Right Angle Termination Style: Solder Housing Material: Thermoplastic (UL94V-0 rated) Contact Material: Brass Electrical Specifications Current Rating: Typically up to 3 A per contact Voltage Rating: Typically 250 V Contact Resistance: ≤ 20 mΩ Insulation Resistance: ≥ 1000 MΩ Dielectric Withstanding Voltage: ~500 VAC Environmental Specifications Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94V-0 RoHS Compliance: Yes Plating Contact Plating: Gold flash over nickel (typical) Tail Plating: Tin over nickel Applications PCB interconnections Embedded systems and microcontroller boards Industrial control interfaces Consumer electronics prototyping Signal and low-power connections Mating Compatibility Compatible with standard 2.54 mm pitch female headers and IDC connectors #commonpartslibrary #connector #header

25 Hz ~ 20 kHz Analog Microphone MEMS (Silicon) 1.5 V ~ 3.63 V Omnidirectional (-32dB @ 94dB SPL) Solder Pads The ICS-40730 is a high-performance analog MEMS microphone designed for precision audio capture in compact electronic systems. It integrates a micro-electromechanical sensing element with an internal impedance conversion amplifier, providing a stable analog output suitable for direct interfacing with audio processing circuits. The device is optimized for applications requiring high signal integrity, low noise, and consistent performance across a wide frequency range. Its small form factor and surface-mount package make it ideal for space-constrained designs such as portable electronics, embedded systems, and industrial sensing equipment. Key Features Omnidirectional microphone response Low noise floor for high signal clarity Wide dynamic range for accurate sound reproduction Analog output interface Surface-mount package for automated assembly Stable performance over temperature variations Electrical Characteristics Supply voltage range suitable for low-power systems Low current consumption for energy-efficient operation High signal-to-noise ratio enabling clear audio capture Consistent sensitivity across operating conditions Acoustic Performance Omnidirectional pickup pattern Flat frequency response over the audible range High acoustic overload point for handling loud sound sources Low total harmonic distortion Mechanical Characteristics Compact surface-mount package Designed for reflow soldering processes Robust structure for reliable operation in portable devices Environmental Specifications Operational across standard industrial temperature ranges Resistant to typical humidity and environmental conditions encountered in consumer and industrial electronics Applications Voice-enabled devices Audio recording systems Industrial monitoring equipment Smart home and IoT devices Portable and wearable electronics Compliance and Standards Designed to meet common environmental and electronic component compliance requirements for modern electronic assemblies #commonpartslibrary #audio #microphone #analog

Optical Sensor Ambient I2C 8-SMD, No Lead The LTR-559ALS-01 is a combined ambient light sensor and proximity sensor module designed for low-power and space-constrained applications. It integrates a photodiode array for ambient light detection and an infrared emitter with a photodiode for proximity sensing. The device provides digital output via an I²C interface and includes programmable interrupt functionality for system-level event handling. It is commonly used in mobile devices, wearable electronics, and industrial applications requiring automatic brightness control and object detection. Key Features: Integrated ambient light and proximity sensing functions High sensitivity with wide dynamic range for light measurement Infrared LED driver for proximity detection I²C digital interface for communication Programmable interrupt output Low power consumption with multiple operating modes Built-in noise cancellation and sunlight rejection Compact surface-mount package Electrical Characteristics: Supply voltage range: compatible with typical low-voltage logic systems Low standby current for power-sensitive applications Programmable gain and integration time for ambient light sensing Adjustable LED drive current for proximity sensing Optical Characteristics: Ambient light sensing with human-eye spectral response approximation Proximity detection using infrared light with high immunity to ambient light interference Interface: Communication protocol: I²C-compatible interface Supports configurable registers for threshold, timing, and interrupt control Package Information: Small form factor surface-mount package suitable for compact PCB layouts Integrated optical window for both ALS and proximity sensing Applications: Display brightness control in smartphones and tablets Proximity detection for touchless interfaces Wearable devices and IoT sensors Industrial automation and control systems Environmental and Compliance: Designed for standard commercial temperature ranges RoHS compliant and suitable for lead-free assembly processes Notes for Design Integration: Requires proper optical isolation between emitter and receiver for accurate proximity sensing PCB layout should minimize interference from external light sources Calibration may be required depending on enclosure and application conditions #commonpartslibrary #sensor #ambient

Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3A 24-WFQFN Exposed Pad General Description: The RTQ2105GQWT-QA is an electronic component designed for integration into compact and efficiency-focused circuit applications. It is engineered to deliver stable performance under varying operating conditions, making it suitable for use in consumer electronics, embedded systems, and power management solutions. The device emphasizes reliability, low power consumption, and consistent signal or power regulation, depending on its intended application within a system. Its form factor supports space-constrained designs while maintaining thermal and electrical stability. Functional Overview: The component provides controlled operation within a defined electrical range, ensuring dependable interaction with surrounding circuitry. It is optimized for seamless compatibility with standard board layouts and commonly used electronic assemblies. The design supports continuous operation with minimal performance drift and is built to handle typical environmental and electrical stresses encountered in modern devices. Electrical Characteristics: The device operates within a specified voltage and current range appropriate for low-power or signal-level applications. It maintains stable output behavior across its operating conditions and includes internal features that support protection, regulation, or signal integrity as required by its functional role. Mechanical Characteristics: The component is housed in a compact package suitable for surface-mount technology. Its physical structure is designed to facilitate automated assembly and secure placement on printed circuit boards. The package ensures adequate heat dissipation and mechanical durability during normal operation. Environmental Considerations: The RTQ2105GQWT-QA is designed to function reliably across a standard range of environmental conditions, including variations in temperature and humidity. It complies with common industry expectations for durability and long-term use in electronic systems. Application Guidelines: This component is intended for use in systems requiring efficient, stable, and compact electronic solutions. Proper circuit design practices should be followed to ensure optimal performance, including appropriate layout, grounding, and thermal management considerations. Compliance and Standards: The device is manufactured in accordance with relevant industry standards for electronic components, supporting quality, safety, and environmental requirements. #commonpartslibrary #integratedcircuit #powermanagement

Hongfa Europe GMBH PCB Mount Power Relay, 5V dc Coil, 5A Switching Current, SPS The HF49FD/005-1H11TF is part of the Hongfa HF49FD series, which consists of compact, high-sensitivity power relays. It operates using a 5 V DC coil and provides electrical isolation between the control circuit and the load, allowing low-power signals (e.g., from a microcontroller) to switch higher voltages or currents. Key Characteristics Type: Electromagnetic relay (non-latching) Contact Configuration: SPST-NO (1 Form A, normally open) Coil Voltage: 5 V DC Switching Current: up to 5 A Switching Voltage: 250 VAC 30 VDC Mounting Type: Through-hole / PCB mount Size: ~20 × 5 × 12.5 mm (slim design) Coil Power Consumption: ~120 mW (low power) Dielectric Strength: up to 3 kV isolation Functional Overview Uses a coil + mechanical contacts: When 5 V is applied → coil energizes → contacts close When removed → contacts open Provides electrical isolation between: control side (low voltage) load side (higher voltage/current) #Relay

RF Transistor 5 NPN 15V 50mA 550MHz 300mW Through Hole 14-PDIP The CA3046 contains five matched NPN bipolar junction transistors (BJTs) integrated on a single silicon chip. These transistors share a common substrate but are electrically isolated from each other, allowing flexible circuit configurations. It is commonly used in analog circuits where closely matched transistor characteristics are required, such as differential amplifiers and current mirrors. Key Features Type: NPN transistor array IC Number of Transistors: 5 matched transistors Integrated Structure: Monolithic silicon chip Isolation: Each transistor is individually accessible Matching: Good thermal and electrical matching between transistors Package: Typically 14-pin DIP or SOIC (varies by manufacturer) Electrical Characteristics (typical) Collector-emitter voltage (Vce): up to ~15 V (varies by variant) Collector current: a few milliamps per transistor (low-power signal applications) Frequency response: suitable for low to medium-frequency analog circuits Operating temperature: industrial range (depends on manufacturer spec) Typical Applications Differential amplifiers Current mirrors Temperature sensing circuits Signal processing circuits Oscillators and timing circuits General-purpose analog transistor building blocks #CommonPartsLibrary #Transistor # BJT #RF-transistor #Bipolar

Green 568nm LED Indication - Discrete 2.2V Radial The WP483GDT is a through-hole green light-emitting diode designed for general-purpose visual indication and low-power lighting applications. It emits a visible green wavelength when forward biased and is commonly used in status indicators, signal displays, and basic illumination circuits. The device is built with a durable epoxy lens package that provides mechanical protection and enhances light output visibility. It is suitable for use in a wide range of electronic systems, including consumer electronics, control panels, and embedded designs. Device Overview The component is a standard discrete LED with a two-lead configuration consisting of an anode and a cathode. It operates by converting electrical energy into light through electroluminescence. The emitted color falls within the green spectrum, making it appropriate for applications requiring clear visual signaling without excessive brightness or power consumption. Electrical Characteristics The LED operates under forward bias conditions, with a typical forward voltage in the range expected for green LEDs. It supports low current operation while maintaining consistent luminous output. Reverse voltage tolerance is limited, and proper polarity must be observed to prevent damage. Current-limiting resistors are required in circuit integration to ensure safe operation. Optical Characteristics The device produces a green light output with a defined luminous intensity and viewing angle based on its lens shape and internal structure. The epoxy lens may be diffused or clear, affecting the spread and focus of the emitted light. Brightness is dependent on the forward current applied. Mechanical Characteristics The LED is housed in a standard round through-hole package, compatible with typical PCB mounting. Leads are spaced to fit common board layouts and can be soldered directly. The epoxy body provides insulation and environmental protection while maintaining optical clarity. Thermal Considerations The device is designed for low power dissipation but should be operated within recommended limits to avoid overheating. Adequate spacing and proper current control help maintain thermal stability and prolong device lifespan. Applications The WP483GDT is suitable for indicator lights in electronic devices, status displays in control systems, educational and hobby electronics, and general-purpose signaling applications where green illumination is required. Compliance and Handling The component should be handled using standard ESD precautions. Storage and soldering conditions should follow typical LED handling practices to maintain performance and reliability. #commonpartslibrary #led #green

17 Position FFC, FPC Connector Contacts, Bottom 0.020" (0.50mm) Surface Mount, Right Angle The F300-1B7H1-11017-E100 is a board-to-board / mezzanine connector designed for high-density interconnections in compact electronic assemblies. It is typically used in applications requiring reliable signal transmission between stacked PCBs, offering precise alignment, robust mechanical retention, and consistent electrical performance. This type of connector is commonly found in industrial electronics, embedded systems, communication devices, and compact consumer electronics where space-saving and high pin-count connectivity are critical. Key Features High-density board-to-board connection Compact form factor for space-constrained designs Reliable contact system for stable signal integrity Precision alignment for accurate mating Durable construction for repeated mating cycles Suitable for high-speed and low-power signal transmission Electrical Characteristics Rated Voltage: Typically 30–100 V (application dependent) Current Rating: Typically 0.3–1.0 A per contact Contact Resistance: Low (typically < 50 mΩ) Insulation Resistance: High (≥ 100 MΩ) Dielectric Withstanding Voltage: ~250–500 VAC Mechanical Characteristics Mounting Type: Surface Mount (SMT) Mating Type: Board-to-board / mezzanine Contact Configuration: High pin-count array Pitch: Typically fine pitch (e.g., 0.3 mm – 0.8 mm range) Mating Cycles: 30–100 cycles (typical) Housing Material: High-temperature thermoplastic Contact Material: Copper alloy with gold plating Environmental Characteristics Operating Temperature Range: -40°C to +85°C (typical) RoHS Compliant: Yes Moisture Sensitivity Level: Standard SMT classification Applications Embedded systems Industrial control electronics Communication devices Portable and compact consumer electronics PCB stacking architectures Packaging Supplied in tape and reel for automated SMT assembly Notes Exact electrical and mechanical values may vary depending on manufacturer specifications and variant configuration Recommended to verify mating connector compatibility and stack height before design implementation Follow manufacturer PCB footprint guidelines for optimal performance #commonpartslibrary #connector