USB 3.1 QFN-64 Interface Controllers RoHS 4.75V~5.25V,0~+70,Channels 2 GL3510 is a low-power USB 3.1 Gen1 hub controller from Genesys Logic available in 2-port and 4-port configurations. It integrates USB 3.1 Gen1 SuperSpeed PHY and USB 2.0 High-Speed PHY, providing backward compatibility with USB 2.0 and USB 1.1 devices. The controller includes integrated 5V-to-3.3V and 5V-to-1.2V regulators, reducing external component count and PCB complexity. GL3510 supports USB Battery Charging Specification BC1.2, including Charging Downstream Port (CDP) and Dedicated Charging Port (DCP) modes, allowing fast charging of smartphones, tablets, and portable devices even during system sleep or power-off states. Suitable for USB hubs, docking stations, industrial computers, embedded systems, monitors, and consumer electronics. Search Keywords: GL3510, GL3510-52, Genesys Logic GL3510, USB 3.1 hub controller, USB hub IC, USB 3.1 Gen1 hub, SuperSpeed USB hub controller, USB 2.0 hub controller, 4-port USB hub, 2-port USB hub, USB BC1.2 controller, charging downstream port controller, dedicated charging port controller, USB docking station controller, embedded USB hub, USB expansion controller, USB host interface, QFN64 USB hub, QFN48 USB hub GL3510 Hashtags: #GL3510 #GL351052 #GenesysLogic #USBHub #USB31 #USB3Gen1 #SuperSpeedUSB #USBController #USBHubController #BC12 #FastCharging #DockingStation #EmbeddedSystems #IndustrialElectronics #ConsumerElectronics #PCBDesign #ElectronicComponents #USB20 #QFN64 #QFN48

24 Position Connector Header, Center Strip Contacts Surface Mount Gold The AXT424124 is a Panasonic P4S series 0.4 mm pitch board-to-board / board-to-FPC connector, specifically a 24-position surface-mount header designed for compact, high-density electronic assemblies. It is commonly used in mobile devices and industrial equipment where space saving and reliable fine-pitch interconnection are required. This connector belongs to Panasonic’s P4S narrow-pitch interconnect family, optimized for very small pitch stacking (0.4 mm) and low-profile designs. It supports mating with a corresponding socket connector to form a mezzanine-style board connection. Key Features Ultra-fine pitch: 0.4 mm for high-density PCB layouts 24-pin dual-row header configuration Board-to-board / board-to-FPC compatibility Low profile design with ~1.5 mm mating height option Space-saving construction for compact electronics High reliability “TOUGH CONTACT” design for stable electrical connection Gold-plated contacts for improved conductivity and corrosion resistance Current rating: ~0.3 A per pin (total limited) Dielectric strength: 150 V AC Insulation resistance: ≥ 1000 MΩ Insertion life: ~50 mating cycles Surface-mount (SMD) termination for automated PCB assembly Typical Applications Smartphones and portable consumer electronics Industrial control modules Compact embedded systems Wearable devices and space-constrained PCBs #Panasonic #AXT424124 #P4SSeries #BoardToBoardConnector #FPCConnector #0.4mmPitch #SMDConnector #MezzanineConnector #HighDensityPCB #ElectronicComponents

Power Supply Encapsulated PCB 12V 30W IRM-30 Series is a compact 30W AC-DC encapsulated power supply module from Mean Well designed for direct PCB mounting or screw-terminal installation. The module accepts a universal AC input range of 85VAC to 305VAC and provides regulated DC outputs with high efficiency up to 90%. It features Class II isolation, built-in EMI filtering compliant with EN55032 Class B without additional external components, and comprehensive protection functions including short-circuit, overload, and over-voltage protection. With no-load power consumption below 0.1W, reinforced insulation, and a wide operating temperature range, the IRM-30 series is ideal for industrial automation, instrumentation, embedded electronics, smart devices, networking equipment, IoT products, factory automation systems, and handheld electronic devices. Search Keywords: IRM-30, Mean Well IRM-30, AC DC power module, encapsulated power supply, PCB mount power supply, industrial power module, 30W power supply, universal input power supply, AC to DC converter, embedded power supply, isolated power module, IRM-30-5, IRM-30-12, IRM-30-24, IRM-30-48, low standby power supply, Class II power supply, industrial automation power supply, DIN power module alternative, compact AC DC converter Hashtags: #IRM30 #MeanWell #ACDCConverter #PowerSupply #PowerModule #PCBMountPowerSupply #IndustrialElectronics #EmbeddedSystems #FactoryAutomation #IoT #PowerElectronics #SwitchingPowerSupply #SMPS #ElectronicComponents #PCBDesign #UniversalInput #IsolationPowerSupply #IndustrialAutomation #LowPowerConsumption #MeanWellPowerSupply

Film Capacitors 1000pF 63 Volts 5% WIMA FKP1 1nF 1600V WIMA FKP 1 Series are high-performance polypropylene (PP) film capacitors designed for extremely high pulse, high-current, and high-frequency applications. These capacitors use metal foil electrodes combined with metallized internal connections, providing very low dissipation factor, excellent self-healing characteristics, low dielectric absorption, and outstanding pulse-handling capability. Available in capacitance values from 100pF to 4.7µF and rated voltages from 400VDC up to 6000VDC, the FKP1 series is optimized for demanding power electronics environments. Typical applications include switch-mode power supplies (SMPS), resonant converters, induction heating, motor drives, inverter systems, TV deflection circuits, pulse generators, electronic ballasts, and industrial high-voltage equipment. The series is AEC-Q200 qualified and compliant with RoHS requirements. Search Keywords: WIMA FKP1, FKP 1, polypropylene film capacitor, pulse capacitor, high pulse capacitor, pulse discharge capacitor, foil capacitor, metallized film capacitor, high frequency capacitor, power electronics capacitor, resonant capacitor, snubber capacitor, inverter capacitor, SMPS capacitor, motor drive capacitor, induction heating capacitor, high voltage film capacitor, AEC-Q200 capacitor, DC link capacitor, low ESR film capacitor, low dissipation capacitor Hashtags: #WIMA #FKP1 #FilmCapacitor #PolypropyleneCapacitor #PulseCapacitor #HighVoltageCapacitor #PowerElectronics #SMPS #ResonantConverter #MotorDrive #InverterDesign #SnubberCapacitor #IndustrialElectronics #AECQ200 #HighFrequencyDesign #ElectronicComponents #PCBDesign #HardwareDesign #PowerSupplyDesign #WIMACapacitor

RESISTOR, 2512 0.25 Ohm +/- 1.0 % 1 W Vishay WSL Series Power Metal Strip® resistors are ultra-low-value surface-mount current-sense resistors designed for high-current measurement, voltage division, and pulse-handling applications. Using a solid metal resistive element with welded construction, the WSL series provides resistance values as low as 0.0005Ω, extremely low inductance (typically 0.5nH to 5nH), and low thermal EMF (<3µV/°C) for accurate current sensing. Available in multiple package sizes including 0603, 0805, 1206, 2010, 2512, and 2816, these resistors support power ratings up to 2W and are suitable for automotive, industrial, power supply, battery management, motor control, DC/DC converters, and high-current embedded systems. The series is AEC-Q200 qualified and optimized for precision current measurement in demanding environments. Search Keywords: WSL, Vishay WSL, Power Metal Strip resistor, current sense resistor, shunt resistor, low ohm resistor, ultra low resistance resistor, current measurement resistor, 0.0005 ohm resistor, precision shunt resistor, surface mount shunt resistor, high current resistor, AEC-Q200 resistor, battery current sensing, motor current sensing, DC DC converter resistor, power supply current monitor, low inductance resistor, metal strip resistor, current sensing component Hashtags: #WSL #Vishay #PowerMetalStrip #CurrentSenseResistor #ShuntResistor #CurrentMeasurement #LowOhmResistor #PrecisionResistor #AECQ200 #PowerElectronics #BatteryManagement #MotorControl #DCDCConverter #PowerSupplyDesign #IndustrialElectronics #AutomotiveElectronics #EmbeddedSystems #PCBDesign #ElectronicComponents #HardwareDesign

SDRAM - Mobile LPDDR4 Memory IC 48Gbit 2.133 GHz MT53E1536M32D4DT-046 WT:A is a high-density 48Gb (6GB) LPDDR4/LPDDR4X SDRAM memory device from Micron Technology. It is designed for high-performance, low-power applications requiring fast memory bandwidth and efficient power management. The device features a 32-bit data bus, supports data rates up to 4266 MT/s, and is packaged in a compact 200-ball FBGA, making it suitable for embedded computing, industrial systems, networking equipment, AI edge devices, automotive electronics, and mobile platforms. Key Features 48Gb (6GB) LPDDR4/LPDDR4X SDRAM Organized as 1.5G × 32 bits Data transfer rates up to 4266 MT/s Maximum clock frequency of 2133 MHz Low-power operation with 1.1V core supply 32-bit memory interface 200-ball FBGA package JEDEC LPDDR4-compliant architecture Per-bank refresh support Temperature-compensated refresh Self-refresh and deep power-down modes Partial-array self-refresh capability High bandwidth with reduced power consumption Optimized for compact embedded designs Operating temperature range: –30°C to +85°C Typical Applications Embedded Linux computers Single-board computers (SBCs) AI and edge computing platforms Industrial automation systems Networking and telecommunications equipment Automotive infotainment and control systems Tablets and mobile devices FPGA and SoC-based designs #commonpartslibrary #integratedcircuit #memory #dram #sdram #lpddr4 #lpddr4x #mobiledram #micron #embeddedsystems #embeddedcomputing #industrialelectronics #automotiveelectronics #edgecomputing #artificialintelligence #networking #telecommunications #highspeedmemory #lowpowerdesign #computerhardware #electroniccomponents #semiconductor #datasheet #fbga #memorychip #electronicsdesign #pcbdesign #hardwareengineering #electronicengineering #systemonchip #fpga #iot #internetofthings #computermemory #digitalelectronics #surfaceMount #smt #bga #storage #highperformancecomputing #hpc #mobiledevices #industrialautomation #electronicdesign #componentlibrary #fluxlibrary #parametricpart #eda #schematic #pcb #electronicdesignautomation #chipdesign #embeddedhardware #memorymodule #lowpowerelectronics #highbandwidthmemory #electronics #hardwaredevelopment #engineering #electricalengineering

Recom 2W Isolated DC-DC Converter, Vin 21.6 26.4 V dc, Vout 15 V dc, -9 V dc RECOM RxxP2xxyyD Series is a 2W isolated DC/DC converter designed specifically for SiC MOSFET and IGBT gate driver applications requiring asymmetric output voltages. The converter provides galvanically isolated dual outputs such as ±20V/-5V or +15V/-3V from a single DC input source. It features reinforced isolation up to 6.4kVDC, very low isolation capacitance (10pF max), high common-mode transient immunity (CMTI) of 65kV/µs, and a transformer with physically separated windings for improved noise immunity. The SIP7 package enables compact PCB integration in industrial power electronics, motor drives, renewable energy systems, EV charging, inverters, and high-voltage switching applications. The device is IEC/EN/UL62368-1 certified and optimized for reliable isolated gate driver power supplies. Search Keywords: RECOM RxxP2xxyyD, isolated DC-DC converter, SIP7 DC-DC converter, gate driver power supply, SiC gate driver converter, IGBT gate driver converter, isolated power module, ±15V isolated supply, ±20V isolated supply, high isolation DC-DC converter, 6.4kV isolation converter, low capacitance converter, CMTI 65kV/us converter, industrial DC-DC module, power electronics converter, motor drive power supply, inverter power supply Hashtags: #RECOM #RxxP2xxyyD #DCDCConverter #IsolatedPowerSupply #GateDriver #SiC #SiCMOSFET #IGBT #PowerElectronics #IndustrialElectronics #MotorDrive #InverterDesign #EVCharging #HighVoltage #GalvanicIsolation #SIP7 #EmbeddedPower #ElectronicComponents #PCBDesign #PowerSupplyModule

Micro-Fit 3.0 Vertical Header, 3.00mm Pitch, Dual Row, 4 Circuits, with PCB Press-fit Metal Retention Clip Connector Header Through Hole 4 position 0.118" (3.00mm) The Molex 0430450426 is a 4-position vertical PCB header belonging to the Micro-Fit 3.0 series, designed for compact and reliable power and signal wire-to-board connections. It features a 3.00 mm pitch, through-hole mounting, and a shrouded design for secure mating with compatible receptacles. This connector is commonly used in applications requiring medium-current power delivery in a compact footprint, such as industrial equipment, automotive electronics, consumer devices, and telecommunications systems. It supports a robust locking mechanism to prevent accidental disengagement and ensures stable electrical performance in vibration-prone environments. Key Features 4-position vertical PCB header 3.00 mm pitch (Micro-Fit 3.0 family) Through-hole solder termination Shrouded, polarized housing for correct mating Locking ramp / retention feature for secure connection Rated for medium-power applications (varies by wire gauge, up to industrial-level current use cases) Operating temperature range: -40°C to +105°C High-voltage capability (up to ~600 V rating depending on configuration) Suitable for automotive, industrial, medical, and telecom systems Typical Applications Industrial control systems Automotive electronics modules Power supply interconnects Communication equipment Embedded systems and PCB power distribution #CommonPartsLibrary #Connector #Molex #MicroFit3 #0430450426 #PCBHeader #WireToBoardConnector #PowerConnector #3mmPitch #ElectronicComponents #ConnectorHeader #AutomotiveElectronics #IndustrialConnector

Isolated Module DC DC Converter 2 Output 5V -5V 300mA 4.5V - 5.5V Input # Engineering Specification ## Product Name IR0505S ## General Description IR0505S is an isolated power conversion module designed to provide reliable DC-to-DC power conversion for electronic and embedded systems requiring galvanic isolation between input and output circuits. The device is intended for use in industrial control equipment, communication systems, instrumentation, automation platforms, and other electronic applications where stable power delivery and electrical isolation are essential. The module incorporates integrated switching and isolation technologies to support efficient power transfer while reducing system complexity and board-level design effort. Its compact form factor allows straightforward integration into printed circuit board assemblies and power distribution architectures. The design emphasizes operational reliability, electrical safety, electromagnetic compatibility, and long-term performance in demanding environments. ## Functional Requirements ### Power Conversion The module shall convert input DC power to an isolated DC output suitable for downstream electronic circuits and subsystems. ### Electrical Isolation The module shall provide galvanic isolation between input and output domains to reduce the propagation of electrical noise, ground loops, and fault conditions. ### Operational Stability The module shall maintain stable output characteristics during normal operating conditions and expected load variations. ### System Integration The module shall support integration into embedded, industrial, and communication systems through standard electrical interfaces and assembly practices. ## Electrical Requirements ### Input Characteristics The device shall accept DC input power within the specified operating range and maintain reliable operation throughout normal conditions. ### Output Characteristics The device shall provide regulated isolated output power suitable for electronic loads requiring stable voltage and current delivery. ### Protection Features The design shall incorporate protective characteristics to support safe operation during abnormal electrical conditions and transient events. ### Noise Performance The module shall minimize conducted and radiated electrical noise to support compatibility with sensitive electronic circuits. ## Mechanical Requirements ### Package Construction The module shall utilize a compact package suitable for direct PCB mounting and automated assembly processes. ### Structural Integrity The assembly shall withstand normal handling, installation, transportation, and operational stresses without degradation of performance. ### Maintainability The device shall support replacement and servicing through standard electronic maintenance procedures. ## Environmental Requirements ### Operating Environment The module shall perform reliably within the environmental conditions specified for industrial and commercial electronic applications. ### Storage Conditions The product shall maintain functional integrity during storage and transportation when handled according to recommended practices. ## Quality Requirements ### Reliability The module shall be designed for dependable long-term operation with consistent electrical performance throughout its intended service life. ### Verification Electrical, mechanical, and environmental characteristics shall be validated through applicable inspection, testing, and qualification procedures. ### Compliance The product shall conform to applicable safety, quality, and manufacturing standards relevant to isolated power conversion devices. ## Documentation Requirements Supporting documentation shall include product identification, electrical characteristics, application guidance, installation recommendations, safety information, and maintenance considerations. ## Classification Tags #IR0505S #DCDCConverter #IsolatedPowerSupply #PowerModule #CommonPartsLibrary #IntegratedCircuit #PowerElectronics #ElectronicComponents #ElectricalEngineering #EmbeddedSystems #IndustrialAutomation #PowerManagement #CircuitDesign #PCBDesign #SystemIntegration #EngineeringSpecification #TechnicalDocumentation #ReliabilityEngineering #ElectronicHardware #ComponentLibrary

MAX3188EEUT+T SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL LCSC Part Number: C2671283 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)/MAXIM(美信) MAX31889 MAX31889 is a high-accuracy digital temperature sensor from Analog Devices featuring an I²C interface and industry-leading measurement precision of ±0.25°C from -20°C to +105°C and ±0.65°C from -40°C to +125°C. Operating from a 1.7V to 3.6V supply, the device offers low power consumption with only 68µA during measurements and 0.55µA in standby mode, making it ideal for battery-powered systems. The sensor includes programmable high and low temperature alarms, a 32-word FIFO buffer for temperature data logging, configurable GPIO pins for conversion triggering and interrupt generation, and unique ROM identification for traceability. Packaged in a compact 2mm × 2mm 6-pin µDFN package, the MAX31889 is suitable for precision temperature monitoring, industrial systems, IoT devices, medical equipment, environmental sensing, and RTD replacement applications. Search Keywords: MAX31889, Analog Devices MAX31889, digital temperature sensor, I2C temperature sensor, precision temperature sensor, high accuracy temperature sensor, low power temperature sensor, industrial temperature sensor, IoT temperature sensor, environmental monitoring sensor, battery powered sensor, programmable temperature alarm, FIFO temperature sensor, RTD replacement, temperature monitoring IC, ±0.25°C temperature sensor, µDFN temperature sensor, embedded temperature sensor, thermal monitoring Hashtags: #MAX31889 #AnalogDevices #TemperatureSensor #DigitalTemperatureSensor #I2C #PrecisionSensor #ThermalMonitoring #EnvironmentalMonitoring #IndustrialElectronics #IoT #EmbeddedSystems #LowPowerDesign #BatteryPowered #Sensor #Measurement #DataLogging #Electronics #ElectronicComponents #PCBDesign #ADI

LED Driver IC 1 Output DC DC Controller SEPIC, Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 8-SO-EP # AL8866QSP-13 Engineering Specifications **General Description** The AL8866QSP-13 is an automotive-qualified, multi-topology DC-switching LED controller manufactured by Diodes Incorporated. It is designed to control an external power MOSFET for high-power automotive LED lighting systems. The device supports buck, boost, buck-boost and single-ended primary-inductance converter configurations. Its wide input-voltage range makes it suitable for automotive power systems and various high-voltage LED applications. The controller uses fixed-frequency peak current-mode regulation with spread-spectrum frequency modulation to reduce electromagnetic interference. It supports both analog and pulse-width-modulation dimming through the DIM input. An integrated programmable soft-start function gradually increases the inductor and switching currents during startup to reduce output-voltage and current stress. The open-drain fault output provides system-level fault reporting for abnormal operating conditions. **Engineering Specifications** **Manufacturer:** Diodes Incorporated **Manufacturer Part Number:** AL8866QSP-13 **Component Type:** Automotive LED driver controller **Converter Topologies:** Buck, boost, buck-boost and SEPIC **Control Architecture:** Fixed-frequency peak current-mode control **External Switching Device:** External power MOSFET **Minimum Input Voltage:** Four point seven volts **Maximum Input Voltage:** Eighty-five volts **Maximum Output Voltage:** Eighty-five volts **Switching Frequency:** Four hundred kilohertz **Frequency Modulation:** Spread-spectrum modulation for reduced electromagnetic interference **LED Current Control:** External current-sense resistor and external MOSFET configuration **Feedback Voltage:** Two hundred millivolts **Typical Quiescent Current:** One point eight milliamperes **Typical Efficiency:** Up to approximately ninety-three percent, depending on the application circuit and external components **Dimming Methods:** Analog dimming and pulse-width-modulation dimming **Analog Dimming Range:** One percent to one hundred percent **Analog Dimming Dynamic Range:** Greater than one hundred to one **Pulse-Width-Modulation Dimming Ratio:** One hundred to one at a two-hundred-hertz dimming frequency **Pulse-Width-Modulation Frequency Range:** Approximately one hundred hertz to one kilohertz **Full-Brightness Current Accuracy:** Approximately plus or minus three percent **Low-Level Dimming Current Accuracy:** Approximately plus or minus twelve percent at twenty-percent dimming **Soft-Start Function:** Externally programmable **Fault Output:** Active-low open-drain fault indicator **Protection Features:** Output overvoltage protection, LED open-circuit protection, output undervoltage protection, LED short-circuit protection, cycle-by-cycle overcurrent limitation, current-sense resistor short-circuit protection, inductor and diode short-circuit detection, diode open-circuit protection and thermal shutdown **Automotive Qualification:** AEC-Q100 Grade One qualified **Automotive Documentation:** PPAP capable **Manufacturing Standard:** Manufactured in IATF-certified automotive facilities **Operating Temperature Range:** Minus forty degrees Celsius to positive one hundred twenty-five degrees Celsius **Package Type:** Thermally enhanced SO-8 exposed-pad package **Pin Count:** Eight leads with exposed thermal ground pad **Mounting Style:** Surface mount **Packing Method:** Thirteen-inch tape and reel **Standard Packing Quantity:** Two thousand five hundred components per reel **Moisture Sensitivity:** Level One **Terminal Finish:** Matte-tin-plated leads **Environmental Compliance:** Lead-free, RoHS compliant, halogen-free and antimony-free **Typical Applications** Automotive high-beam and low-beam lighting Automotive daytime running lights Automotive fog lights Automotive turn-signal lights Automotive position lights Automotive brake and stop lights High-power exterior LED lighting Multi-topology automotive LED driver modules #AL8866QSP13 #AL8866Q #DiodesIncorporated #LEDDriver #AutomotiveLED #AutomotiveElectronics #BuckConverter #BoostConverter #BuckBoostConverter #SEPICConverter #PowerElectronics #LEDLighting #ElectronicComponents #EngineeringSpecifications

40 Position FFC, FPC Connector Receptacle 0.071" (1.80mm) Surface Mount, Right Angle The KF1R-BBAH1-EA940 is a FlexFast™ board-to-board receptacle connector designed for high-density PCB interconnection applications. It provides a reliable electrical and mechanical interface between printed circuit boards in compact electronic systems. The connector features a right-angle surface-mount configuration, dual-row contact arrangement, and gold-plated copper-alloy contacts to ensure excellent signal integrity, low contact resistance, and long-term durability. Its thermoplastic housing offers mechanical strength and high-temperature resistance, making it suitable for communication, industrial, consumer, and embedded electronic equipment. Manufacturer Amphenol Communications Solutions Part Number KF1R-BBAH1-EA940 Product Series FlexFast™ Connector Type Board-to-Board Receptacle Connector Number of Positions 40 Contacts Contact Arrangement Dual Row Mounting Style Surface Mount Technology (SMT) Orientation Right Angle Contact Pitch 1.8 mm Termination Type Solder Termination Contact Material Copper Alloy Contact Plating Gold Housing Material Thermoplastic Housing Color Black Current Rating 1 A per Contact Operating Temperature Range -40°C to +125°C Flammability Rating UL94 V-0 Mating Durability 100 Mating Cycles Compliance High-density board-to-board interconnection solution Compact right-angle SMT design Dual-row contact configuration Gold-plated contacts for enhanced reliability Low contact resistance and stable electrical performance Durable thermoplastic housing Wide operating temperature range Integrated alignment features for reliable mating Suitable for signal and power transmission Designed for industrial, communication, and embedded electronic applications #Connector #BoardToBoard #FlexFast #Amphenol #SMT #RightAngle #Receptacle #PCB #ElectronicComponents #Interconnect #KF1R_BBAH1_EA940

Pin Receptacle Connector 0.037" ~ 0.043" (0.94mm ~ 1.09mm) No Tail Surface Mount The 6628-0-18-15-18-27-10-0 is a surface-mount receptacle connector manufactured by Mill-Max Manufacturing Corp.. This component is designed to provide a reliable board-level interconnect solution for applications requiring compact, high-density signal routing. The connector utilizes precision-machined contacts to ensure excellent electrical performance, mechanical durability, and long-term mating reliability. The device features a low-profile surface-mount configuration optimized for automated assembly processes and space-constrained electronic designs. Its rugged construction supports repeated insertion and removal cycles while maintaining consistent contact integrity. The connector is suitable for embedded systems, communication equipment, industrial electronics, instrumentation, prototyping platforms, and custom board-to-board interface applications. The receptacle incorporates high-quality conductive materials and plated contact surfaces to minimize contact resistance and enhance corrosion resistance. The SMT mounting style enables efficient PCB integration while supporting robust mechanical attachment during operation and handling. General Description The 6628-0-18-15-18-27-10-0 is a precision-machined surface-mount receptacle connector intended for high-reliability electronic interconnections. It offers dependable electrical contact, compact footprint characteristics, and excellent mechanical stability for demanding applications. The connector is commonly used where reliable signal transmission, ease of assembly, and long service life are essential design requirements. Its precision socket architecture makes it suitable for mating with compatible pin headers and custom interconnect systems while supporting modern automated manufacturing environments. #MillMax #Connector #Receptacle #SMTConnector #BoardToBoard #ElectronicInterconnect #SurfaceMount #PrecisionMachined #EmbeddedSystems #IndustrialElectronics #PCBDesign #HardwareEngineering #ElectronicComponents

The 109RF50-1-A-5/2D is a Pickering Electronics Series 109 Micro-SIL® RF reed relay designed for high-density PCB applications requiring low-level signal switching and excellent RF performance. It features a 50 Ω coaxial configuration, SPST normally open (1 Form A) contact arrangement, and a 5 VDC coil with an integrated diode for coil suppression. The relay uses a mu-metal magnetic shield package to minimize magnetic interaction when multiple relays are closely stacked, making it suitable for compact test systems, RF switching matrices, and high-speed signal applications. Key Features Relay Type: Micro-SIL® RF Reed Relay Manufacturer: Pickering Electronics Series: Series 109 Contact Configuration: SPST-NO (1 Form A) Coil Voltage: 5 VDC Coil Resistance: 375 Ω Switching Current: Up to 0.5 A Switching Power: 10 W Maximum Switching Voltage: 200 V Standoff Voltage: 240 V Contact Type: Low-level dry reed contact RF Characteristic Impedance: 50 Ω coaxial configuration Integrated Protection: Internal diode included Package Type: Through-hole Micro-SIL (SIP) Magnetic Shielding: Mu-metal package for reduced relay interaction in dense layouts Operating Temperature: Approximately -20 °C to +85 °C High Density Mounting: Stackable on 0.15 × 0.6 inch pitch for space-saving PCB designs Typical Applications RF signal switching systems Automatic Test Equipment (ATE) switching matrices High-speed digital signal switching RF filters and instrumentation equipment Communication test platforms Precision measurement equipment #PickeringElectronics #109RF50 #ReedRelay #RFRelay #MicroSILRelay #SPSTRelay #SignalSwitching #RFSignal #ATEEquipment #TestAndMeasurement #PCBRelay #HighDensityDesign #ElectronicComponents

FLASH - NOR Memory IC 128Mb (16M x 8) SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC 128M-bit Serial Flash Memory with uniform 4KB sectors and Dual/Quad SPI Winbond W25Q128JV is a 128-Mbit (16 MB) serial NOR Flash memory device designed for code and data storage in embedded systems. It supports standard SPI, Dual SPI, Quad SPI (QSPI), and Dual/Quad Peripheral Interface (DPI/QPI) modes, enabling high-speed data transfer rates up to 133 MHz clock operation and up to 532 MB/s equivalent throughput in Quad I/O DTR mode. The device supports Execute-In-Place (XIP), allowing processors and microcontrollers to run code directly from external flash memory without copying it to RAM. Features include 4 KB sector erase, 32 KB and 64 KB block erase, page programming, hardware/software write protection, security registers, JEDEC identification, SFDP support, suspend/resume operations, and low-power standby modes. Suitable for microcontrollers, FPGA configuration storage, IoT devices, industrial controllers, networking equipment, consumer electronics, and embedded systems requiring reliable non-volatile memory. Search Keywords: W25Q128JV, Winbond flash memory, SPI NOR Flash, QSPI Flash, Quad SPI memory, Serial Flash memory, 128Mbit Flash, 16MB Flash memory, Execute In Place XIP, external MCU flash, ESP32 flash memory, FPGA configuration memory, NOR flash storage, W25Q128, Dual SPI Flash, Quad I/O Flash, embedded nonvolatile memory, serial flash IC Hashtags: #W25Q128JV #Winbond #NORFlash #SPIMemory #QSPI #SerialFlash #FlashMemory #EmbeddedSystems #Microcontroller #ESP32 #FPGA #NonVolatileMemory #XIP #IoT #ElectronicsDesign #MemoryIC #FirmwareStorage #QuadSPI #EmbeddedHardware #ElectronicComponents

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Plug Connector 24 Position Board Edge, Surface Mount; Through Hole, Right Angle Global Connector Technology (GCT) USB4155-03-C is a USB Type-C Plug Connector designed for USB 3.2 Gen 2 (USB 3.1 Gen 2 SuperSpeed+) high-speed data applications. It is a right-angle, horizontal SMT connector with a 24-contact configuration, suitable for PCB edge mounting. The connector supports high-speed signal transmission, power delivery, and durable mechanical connection for embedded systems, portable devices, and consumer electronics. Key Features: Connector Type: USB Type-C Plug Connector USB Standard: USB 3.2 Gen 2 / USB 3.1 Gen 2 SuperSpeed+ Number of Contacts: 24 positions Mounting Type: Surface Mount Technology (SMT), right-angle horizontal PCB mounting Data Transfer Rate: Supports high-speed USB 3.2 Gen 2 communication (up to 10 Gbps) Current Rating: Up to 5 A for power delivery applications Voltage Rating: Up to 48 VDC Durability: Rated for approximately 10,000 mating cycles Shielding: Metal shielded housing for EMI protection Contact Finish: Gold-plated contacts for reliable conductivity Operating Temperature: -30°C to +85°C Application: Embedded systems, laptops, tablets, mobile devices, storage devices, and USB-C interface boards Component Classification: Category: Connector / Interconnect Component Subcategory: USB Type-C Connector Not an IC or semiconductor component PCB Footprint Required: Yes Mechanical Part: No (it is an electromechanical connector with soldered electrical terminals) #CommonPartsLibrary #Connector #USBTypeC #USBConnector #USB32Gen2 #USB31Gen2 #SuperSpeedPlus #GCT #BoardMountConnector #SMTConnector #HighSpeedInterface #PCBDesign #ElectronicComponents #InterconnectTechnology

2.2 kOhms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film he CFR-25JB-52-2K2 is a carbon film through-hole resistor manufactured by Yageo. It is designed for general-purpose current limiting, voltage division, biasing, filtering, and signal conditioning applications in electronic circuits. The resistor features a durable carbon film construction, axial lead configuration, and flame-resistant coating, providing stable electrical performance and reliable operation across a wide temperature range. It is suitable for consumer, industrial, automotive, and embedded electronic systems. Manufacturer Yageo Part Number CFR-25JB-52-2K2 Product Series CFR Component Type Carbon Film Resistor Resistance Value 2.2 kΩ Resistance Tolerance ±5% Rated Power 0.25 W (1/4 W) Technology Carbon Film Mounting Type Through Hole Package Style Axial Leaded Number of Terminals 2 Operating Temperature Range -55°C to +155°C Temperature Coefficient -500 ppm/°C to +350 ppm/°C Working Voltage 250 V Overload Voltage 500 V Body Dimensions 2.4 mm Diameter × 6.3 mm Length Compliance RoHS Compliant Qualification AEC-Q200 Automotive Qualified Key Features Carbon film resistor technology for stable performance 2.2 kΩ resistance value suitable for general-purpose applications 1/4 W power rating ±5% resistance tolerance Axial through-hole package for easy assembly and prototyping Wide operating temperature range Automotive AEC-Q200 qualified Low-cost and reliable passive component solution Suitable for voltage divider, pull-up, pull-down, current-limiting, and signal-conditioning circuits RoHS compliant construction for environmentally conscious designs High working voltage capability for low-power electronic applications #Resistor #CarbonFilm #Yageo #ThroughHole #AxialResistor #PassiveComponent #AECQ200 #AutomotiveElectronics #CFRSeries #CFR25JB522K2 #ElectronicComponents #PCBDesign #EmbeddedSystems

Connector Header Surface Mount, Right Angle 8 position 0.039" (1.00mm) The SM08B-SRSS-TB is a compact, right-angle, surface-mount terminal block connector designed for secure wire-to-board connections in a wide range of electronic applications. It features a spring-clamp mechanism that ensures reliable electrical contact while allowing easy insertion and removal of solid or stranded wires without the need for screws. The terminal block is constructed from high-temperature, flame-retardant thermoplastic, providing robust mechanical stability and durability in harsh environments. Its low-profile design, consistent contact pressure, and compact footprint make it ideal for industrial control panels, automation systems, consumer electronics, power supplies, and signal distribution boards where secure and maintenance-free wire connections are required. Engineering Specifications Manufacturer: Sullins Connector Solutions / TE Connectivity Part Number: SM08B-SRSS-TB Connector Type: Terminal Block, Right Angle Mounting Style: Surface Mount Actuation Method: Spring-Clamp Wire Size Accommodation: Small Gauge Solid and Stranded Wires Contact Material: Tin-Plated Copper Alloy Housing Material: High-Temperature Thermoplastic, Flame Retardant Operating Voltage: Standard Low-Voltage Electronics Current Rating: Suitable for Signal and Low-Power Connections Pitch: Standard 5 mm / 0.2 inch (SM Series Typical) Poles: 8 Positions Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Industrial Controls, Automation Equipment, Signal Distribution, PCB Wiring, Consumer Electronics, Power Supplies, Embedded Systems Key Features Reliable spring-clamp wire retention Maintenance-free, no screws required Compact, low-profile design Durable thermoplastic housing Easy PCB mounting and soldering Suitable for solid and stranded wires #SM08B #SM08B_SRSS_TB #SpringClampConnector #TerminalBlock #SurfaceMount #RightAngleConnector #WireToBoard #PCBConnector #IndustrialElectronics #Automation #EmbeddedSystems #ElectronicComponents #SignalDistribution #LowPowerConnector #CompactConnector

The 24F 5A250V is a panel-mount cartridge fuse holder designed to securely accommodate and electrically connect cartridge fuses in power distribution and protection circuits. It provides a reliable interface between the fuse element and the electrical system, enabling easy fuse replacement while maintaining electrical safety and mechanical stability. Commonly used in industrial equipment, consumer electronics, power supplies, appliances, instrumentation, and control systems, the fuse holder supports circuit protection against overload and fault conditions while ensuring convenient maintenance and serviceability. Engineering Specification Device Type Panel-Mount Cartridge Fuse Holder Fuse Compatibility Cartridge Fuse Installation and Retention Current Rating Suitable for Low-Voltage Power Protection Applications Voltage Rating Compatible with AC Power Distribution Circuits Mounting Style Panel Mount Connection Method Solder Terminal or Wire Connection Interface Contact Material Conductive Metal Contacts with Corrosion Resistance Housing Material Insulating High-Temperature Polymer Construction Mechanical Characteristics Secure Fuse Retention Easy Fuse Replacement Stable Mechanical Assembly Durable Construction Safety Characteristics Electrical Isolation Support Reliable Contact Performance Overcurrent Protection Interface Safe Fuse Accessibility Environmental Characteristics Long Service Life Resistance to Mechanical Wear Suitable for Commercial and Industrial Environments Applications Power Supplies Industrial Control Equipment Consumer Electronics Electrical Appliances Instrumentation Systems Battery Chargers Test Equipment Automation Systems Distribution Panels Embedded Electronic Devices Features Compact Panel-Mount Design Reliable Electrical Contact Easy Maintenance Access High Mechanical Durability Secure Fuse Retention Mechanism Simple Installation Wide Application Compatibility RoHS Compliant Construction Component Category Fuse Holder #commonpartslibrary #passivecomponents #fuseholder #circuitprotection #overcurrentprotection #powerelectronics #powersupply #industrialelectronics #electricalsafety #panelmount #electroniccomponents #powermanagement #protectioncircuit #controlsystems #applianceelectronics

The TTP223-BA6 is a single-channel capacitive touch sensor integrated circuit designed to replace traditional mechanical push buttons with a reliable touch-sensitive interface. The device utilizes capacitive sensing technology to detect human touch through conductive and non-conductive surfaces, enabling sleek and durable user interface designs. It features low power consumption, stable operation, high sensitivity, and simple implementation, making it suitable for consumer electronics, home appliances, industrial controls, smart devices, and embedded applications requiring touch-based input functionality. Engineering Specification Device Type Capacitive Touch Sensor Controller Sensing Method Capacitive Touch Detection Channel Configuration Single Touch Input Channel Output Configuration Digital Logic Output Operating Mode Momentary Touch Mode Toggle Touch Mode Sensitivity Control External Adjustment Capability Response Characteristics Fast Touch Detection Response Noise-Resistant Operation Stable Capacitive Sensing Performance Power Characteristics Low Power Consumption Optimized for Battery-Powered Applications Low Standby Current Operation Interface Compatibility Microcontrollers Embedded Processors Digital Logic Systems Human-Machine Interface Circuits Protection Characteristics High Immunity to Environmental Interference Reliable Touch Detection Performance Package Style SOP Surface-Mount Package Mounting Type Surface Mount Technology Applications Touch Buttons Consumer Electronics Home Appliances Smart Switches Control Panels Portable Devices IoT Products Industrial User Interfaces Lighting Controls Interactive Embedded Systems Features Single-Key Capacitive Touch Interface Mechanical Button Replacement Low Power Operation High Sensitivity Detection Adjustable Touch Parameters Compact Package Design Simple Circuit Integration Stable Environmental Performance Long Operational Life RoHS Compliant Construction Manufacturer TONTEK Design Technology #commonpartslibrary #integratedcircuit #touchsensor #capacitivetouch #humanmachineinterface #embeddedsystems #consumerelectronics #industrialelectronics #iot #controlpanel #smartdevices #sensorinterface #digitalinterface #lowpower #electroniccomponents