# SAM-M10Q-00B Engineering Specifications **General Description** The SAM-M10Q-00B is a compact, ultra-low-power Global Navigation Satellite System receiver module manufactured by u-blox. It is designed to provide highly accurate positioning, navigation, and timing information for battery-powered and space-constrained applications. Built on the u-blox M10 positioning platform, the module supports concurrent reception of multiple satellite constellations, enabling improved positioning accuracy, faster acquisition times, and enhanced reliability in challenging environments such as urban canyons and partially obstructed outdoor locations. Its optimized power architecture significantly reduces energy consumption while maintaining continuous navigation performance. The integrated antenna architecture and compact system-in-package design simplify hardware development by reducing external component requirements. The module is suitable for asset tracking, wearable devices, Internet of Things systems, industrial monitoring equipment, smart city infrastructure, agricultural applications, and portable navigation products. Designed for high-volume embedded applications, the SAM-M10Q-00B combines advanced GNSS technology, low power consumption, and robust positioning performance in a miniature surface-mount package. **Engineering Specifications** **Manufacturer:** u-blox **Manufacturer Part Number:** SAM-M10Q-00B **Component Type:** GNSS receiver module **Technology:** Multi-constellation satellite positioning receiver **GNSS Platform:** u-blox M10 positioning technology **Navigation Function:** Global positioning, navigation, and timing **Satellite Reception:** Concurrent multi-constellation GNSS tracking **Supported Systems:** GPS, Galileo, GLONASS, BeiDou and regional augmentation services **Receiver Architecture:** High-sensitivity GNSS receiver **Positioning Capability:** Real-time location tracking and navigation **Acquisition Performance:** Fast satellite acquisition and reacquisition **Tracking Performance:** Continuous satellite tracking under dynamic conditions **Position Accuracy:** High-precision navigation performance **Sensitivity:** Optimized for weak-signal environments **Power Consumption:** Ultra-low-power operation **Power Supply Configuration:** Single-supply operation **Data Interface:** Serial communication interface for host processor integration **Communication Protocols:** Standard GNSS navigation messaging support **Integrated Features:** Embedded antenna solution and RF front-end integration **Startup Modes:** Cold start, warm start and hot start operation **Timing Capability:** Precision timing and synchronization support **Interference Mitigation:** Advanced signal-processing algorithms for improved reception **System Integration:** Designed for compact embedded applications **Environmental Performance:** Reliable operation in outdoor and industrial environments **Operating Temperature Range:** Industrial temperature range **Package Type:** System-in-package GNSS module **Mounting Style:** Surface mount technology **Package Construction:** Compact low-profile module **Environmental Compliance:** RoHS compliant and lead-free **Reliability Features:** Designed for long-term embedded operation and high-volume production **Typical Applications** Asset tracking devices Internet of Things systems Wearable electronics Portable navigation equipment Fleet management systems Smart city infrastructure Industrial monitoring equipment Agricultural positioning systems Environmental data loggers Personal tracking devices Drone navigation systems Geolocation-enabled sensors Telematics systems Logistics and transportation tracking Battery-powered embedded products #SAMM10Q00B #SAMM10Q #uBlox #GNSS #GPSModule #SatelliteNavigation #PositioningSystem #IoT #AssetTracking #WearableTechnology #EmbeddedSystems #NavigationModule #Telematics #LocationTracking #ElectronicComponents #EngineeringSpecifications

Adafruit 2472 BNO055 breakout Adafruit BNO055 Absolute Orientation Sensor is a 9-DoF intelligent motion tracking module based on the Bosch BNO055 system-in-package sensor. The device integrates a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, and an onboard ARM Cortex-M0 microcontroller running Bosch sensor fusion algorithms. Unlike traditional IMUs, the BNO055 directly outputs absolute orientation data in Euler angles, quaternions, linear acceleration, gravity vectors, and calibration information, eliminating the need for complex sensor fusion calculations on the host MCU. The sensor communicates via I²C or UART interfaces and is widely used in robotics, drones, autonomous vehicles, VR/AR systems, motion tracking, navigation, balancing robots, wearable devices, and orientation sensing applications. Search Keywords: BNO055, Adafruit BNO055, Absolute Orientation Sensor, 9DOF Sensor, IMU Sensor, Bosch BNO055, Sensor Fusion IMU, Orientation Sensor, Quaternion Sensor, Euler Angle Sensor, Motion Tracking Sensor, Accelerometer Gyroscope Magnetometer, AHRS Sensor, Robotics IMU, Drone Orientation Sensor, Wearable Motion Sensor, Navigation Sensor, I2C IMU Sensor, UART IMU Sensor, Absolute Position Sensor Hashtags: #BNO055 #Adafruit #BoschSensortec #IMU #9DOF #OrientationSensor #MotionTracking #SensorFusion #Quaternion #AHRS #Accelerometer #Gyroscope #Magnetometer #Robotics #DroneTechnology #EmbeddedSystems #IoTDevices #ElectronicsDesign #PCBDesign #HardwareEngineering

NAVIGATION, 50mA, 12VDC SPST-NO, 4 Way Directional, Center Select Surface MountJS1400 Series is a 5-position SMT navigation switch (joystick switch) from E-Switch designed for user interface navigation and directional control applications. The switch provides five normally-open positions including up, down, left, right, and center push selection. It features a compact surface-mount design, 360° directional actuation, long mechanical life of up to 100,000 cycles, and low operating force for intuitive user interaction. With a 12VDC, 50mA rating and compact footprint, the JS1400 is ideal for handheld devices, navigation controls, telecommunications equipment, consumer electronics, industrial interfaces, medical devices, and embedded control systems requiring menu navigation and cursor control. Search Keywords: JS1400, E-Switch JS1400, navigation switch, joystick switch, 5-position switch, 5-way switch, SMT joystick, navigation controller switch, directional switch, center push switch, tactile joystick switch, user interface switch, handheld device switch, menu navigation switch, cursor control switch, embedded control switch, telecom navigation switch, industrial control switch, surface mount joystick, PCB joystick switch Hashtags: #JS1400 #ESwitch #NavigationSwitch #JoystickSwitch #5WaySwitch #DirectionalSwitch #SMTSwitch #TactileSwitch #UserInterface #HMI #EmbeddedSystems #IndustrialElectronics #ConsumerElectronics #Telecommunications #HandheldDevices #PCBDesign #ElectronicComponents #Switch #ControlInterface #NavigationControl

Accelerometer X, Y, Z Axis ±2g, 4g, 8g 1.5kHz 14-CLCC (6x6) General Description The ADXL355BEZ is a low noise, low drift, low power, three-axis MEMS accelerometer intended for high-precision sensing applications. It delivers high-resolution digital acceleration data with excellent long-term stability and minimal temperature-induced variation. The device integrates a complete sensing chain, including the MEMS sensor element, analog conditioning, analog-to-digital conversion, and digital filtering. Output data is provided through SPI or I²C interfaces, enabling straightforward integration into embedded and industrial systems. Key Features Three-axis acceleration sensing (X, Y, Z) Selectable full-scale ranges: ±2 g, ±4 g, ±8 g Low noise density (~25 µg/√Hz) Low offset and minimal temperature drift High-resolution 20-bit digital output Integrated digital filtering SPI and I²C communication interfaces Low power consumption (~200 µA typical) Wide supply voltage range (2.25 V to 3.6 V) Integrated temperature sensor Hermetically sealed package Applications Structural health monitoring Vibration measurement and analysis Tilt and inclination sensing Industrial condition monitoring Navigation and inertial systems Seismic detection Robotics and stabilization platforms Functional Description The ADXL355BEZ includes an integrated sensing and processing architecture composed of: Three-axis MEMS sensing element Analog front-end signal conditioning High-resolution ADC Digital filtering and decimation stages Temperature sensing element Digital communication interface (SPI/I²C) Configuration and control registers Electrical Characteristics (Typical) Supply voltage: 2.25 V to 3.6 V Supply current: ~200 µA Output data rate: up to 4 kHz Noise density: ~25 µg/√Hz Resolution: 20-bit Interface: SPI / I²C Mechanical and Package Information Package type: LGA (Land Grid Array) Approximate dimensions: 3 mm × 5 mm × 1 mm Hermetically sealed for improved environmental robustness Interface and Communication Supports SPI (4-wire) and I²C protocols Outputs 20-bit acceleration data per axis Data format: two’s complement Measurement Ranges ±2 g ±4 g ±8 g Environmental Specifications Operating temperature range: -40°C to +125°C Storage temperature range: -55°C to +150°C Power Management Supports measurement and standby modes Designed for low-power operation in continuous sensing applications Compliance and Reliability Industrial-grade device Designed for long-term stability RoHS compliant #commonpartslibrary #sensor #accelerometer

Multi-Band CAT-M and NB-loT Module The SIM7080G is Multi-Band CAT-M and NB-IoT module solution in a SMT type . It has strong extension capability with rich interfaces including UART, GPIO, PCM, SPI, I2C etc. The module provides much flexibility and ease of integration for customer's application. It is designed for applications that need low latency, Low throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for M2M applications, such as metering, asset tracking, remote monitoring , E-health etc.. LTE Cat-M1 and NB-IoT Dual Mode Supports both LTE Cat-M1 (eMTC) and NB-IoT communication technologies. Complies with 3GPP Release 14 standards. Global Multi-Band Support Covers a wide range of global LTE frequency bands for worldwide deployment. Ultra-Low Power Operation Supports Power Saving Mode (PSM) and Extended Discontinuous Reception (eDRX). Enables battery lifetimes of up to 10 years in low-duty-cycle applications. Integrated GNSS Positioning Supports GNSS navigation capabilities including GPS and other satellite systems for location-based applications. Rich Peripheral Interfaces UART USB GPIO SPI I²C ADC PCM/I²S SIM card interface Comprehensive Internet Protocol Support TCP/IP UDP HTTP/HTTPS FTP MQTT CoAP LwM2M TLS/DTLS security protocols Firmware Update Support FOTA (Firmware Over-The-Air) USB firmware upgrade capability. Compact SMT Package 77-pin LCC+LGA package Dimensions: 17.6 mm × 15.7 mm × 2.3 mm Compatible footprint with the SIM868 module family. Industrial Operating Temperature Operating range: −40°C to +85°C. #Module #RF-Transceiver

LSM6DSO32X is a low-power 6-axis IMU (Inertial Measurement Unit) from STMicroelectronics that integrates a 3-axis accelerometer with up to ±32g full-scale range and a 3-axis gyroscope with selectable ranges up to ±2000 dps. The device features an embedded Machine Learning Core (MLC), Finite State Machine (FSM), pedometer, step detector, tilt detection, motion classification, and smart sensor processing functions, enabling advanced edge AI and sensor fusion applications without continuous MCU intervention. Communication is supported through SPI, I²C, and MIPI I3C interfaces. Designed for wearable devices, smart watches, asset tracking, IoT products, motion analysis, gesture recognition, navigation systems, and low-power embedded applications. Search Keywords: LSM6DSO32X, ST LSM6DSO32X, 6-axis IMU, inertial measurement unit, accelerometer gyroscope combo, 3-axis accelerometer, 3-axis gyroscope, machine learning sensor, embedded AI sensor, motion sensor, MEMS sensor, pedometer sensor, step counter sensor, tilt detection sensor, gesture recognition sensor, SPI IMU, I2C IMU, I3C sensor, wearable sensor, navigation sensor, sensor fusion IMU, smart motion sensor, asset tracking sensor Hashtags: #LSM6DSO32X #STMicroelectronics #IMU #MEMS #Accelerometer #Gyroscope #MotionSensor #MachineLearningCore #EmbeddedAI #SensorFusion #Pedometer #Wearables #IoT #AssetTracking #Navigation #GestureRecognition #I2C #SPI #I3C #ElectronicComponents

Magnetic Sensors QMC5883L LGA-16_L3.0-W3.0-P0.50-BL_SQ The QMC5883L is a multi-chip three-axis magnetic sensor. This surface -mount, small sized chip has integrated magnetic sensors with signal condition ASIC, targeted for high precision applications such as compassing, navigation and gaming in drone, robot, mobile and personal hand-held devices. The QMC5883L is based on our state-of-the-art, high resolution, magneto-resistive technology licensed from Honeywell AMR technology. Along with custom-designed 16-bit ADC ASIC, it offers the advantages of low noise, high accuracy, low power consumption, offset cancellation and temperature compensation. QMC5883L enables 1° to 2° compass heading accuracy. The I²C serial bus allows for easy interface. The QMC5883L is in a 3x3x0.9mm3 surface mount 16-pin land grid array (LGA) package.  3-Axis Magneto-Resistive Sensors in a 3x3x0.9 mm3 Land Grid Array Package (LGA), guaranteed to operate over an extended temperature range of -40 °C to +85 °C.  Small Size for Highly Integrated Products. Signals Have Been Digitized And Calibrated.  16 Bit ADC With Low Noise AMR Sensors Achieves 2 Milli-Gauss Field Resolution  Enables 1° To 2° Degree Compass Heading Accuracy , Allows for Navigation and LBS Applications  Wide Magnetic Field Range (±8 Gauss)  Maximizes Sensor’s Full Dynamic Range and Resolution  Temperature Compensated Data Output and Temperature Output  Automatically Maintains Sensor’s Sensitivity Under Wide Operating Temperature Range  I 2C Interface with Standard and Fast Modes.  High-Speed Interfaces for Fast Data Communications. Maximum 200Hz Data Output Rate  Wide Range Operation Voltage (2.16V To 3.6V) and Low Power Consumption (75A)  Compatible with Battery Powered Applications  Lead Free Package Construction  RoHS Compliance  Software And Algorithm Support Available  Compassing Heading, Hard Iron, Soft Iron, and Auto Calibration Libraries Available #CommonPartsLibrary #Sensor

Accelerometer, Gyroscope, Magnetometer, 9 Axis Sensor I2C, SPI, UART Output The BNO085 is a high-performance 9-axis absolute orientation sensor system-in-package (SiP) that integrates a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, and a low-power ARM Cortex-M0+ microcontroller running CEVA/Hillcrest SH-2 sensor fusion firmware. It provides accurate real-time orientation, motion tracking, and activity detection while offloading complex sensor fusion calculations from the host processor. The device is widely used in robotics, AR/VR systems, wearables, drones, IoT devices, and navigation applications. Key Features 9-axis motion sensing with integrated accelerometer, gyroscope, and magnetometer Built-in SH-2 sensor fusion engine for accurate orientation tracking ARM Cortex-M0+ processor for onboard motion processing Outputs quaternion, rotation vector, linear acceleration, gravity vector, angular velocity, and magnetic field data Advanced motion detection including tap, step, shake, and significant motion detection Activity classification and stability detection capabilities Low-latency rotation vectors optimized for AR/VR applications Supports I²C, SPI, and UART communication interfaces Configurable output data rates and timestamps Low-power operation suitable for battery-powered devices Compact 28-pin LGA package (5.2 mm × 3.8 mm) Operating temperature range: -40°C to +85°C Backward compatible with BNO080 designs while adding support for future application-specific libraries Applications Robotics and autonomous systems Virtual Reality (VR) and Augmented Reality (AR) Wearable devices and fitness trackers Drones and UAVs Head-mounted displays (HMDs) Industrial motion tracking IoT and smart devices Navigation and positioning systems #BNO085 #IMU #9AxisSensor #MotionTracking #SensorFusion #OrientationSensor #Robotics #AR #VR #IoT #Wearables #EmbeddedSystems #CEVA #HillcrestLabs #MotionDetection #Quaternion #InertialMeasurementUnit

The LSM6DSOXTR is a low-power inertial measurement unit integrating a three-axis accelerometer and a three-axis gyroscope within a compact surface-mount package. Designed for motion tracking, gesture recognition, activity monitoring, and sensor fusion applications, the device incorporates embedded machine learning capabilities and programmable finite state machines to enable intelligent edge processing with reduced host processor workload. The sensor supports high-performance motion sensing while maintaining low power consumption, making it suitable for wearable devices, IoT products, industrial monitoring systems, smart home equipment, and portable electronics. Engineering Specification Device Type Six-axis inertial measurement unit featuring a three-axis accelerometer and three-axis gyroscope. Sensor Functions Motion sensing, orientation detection, vibration monitoring, gesture recognition, activity tracking, tilt sensing, and sensor fusion. Integrated Features Embedded machine learning core, finite state machine engine, sensor hub functionality, timestamp generation, event detection, and programmable interrupt generation. Communication Interface Supports digital communication through I²C, SPI, and I³C interfaces for integration with microcontrollers and embedded processors. Power Characteristics Optimized for low-power operation with multiple performance modes supporting battery-powered and always-on applications. Measurement Capabilities Provides configurable acceleration and angular rate measurement ranges with programmable output data rates and digital filtering options. Embedded Intelligence Includes on-chip machine learning and event classification capabilities to enable local data processing and reduce system power consumption. Package Style Compact surface-mount LGA package suitable for space-constrained electronic designs. Applications Wearable electronics, asset tracking devices, industrial sensors, robotics, smart appliances, navigation systems, handheld devices, health monitoring equipment, and IoT products. Manufacturer STMicroelectronics. Hashtags #LSM6DSOXTR #STMicroelectronics #IMU #MotionSensor #Accelerometer #Gyroscope #SensorFusion #MachineLearningCore #EmbeddedSystems #WearableElectronics #IndustrialAutomation #IoT #SmartDevices #MEMS #CommonPartsLibrary