• Block Diagram Review Demo

    Block Diagram Review Demo

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #SeeedStudio #XIAO #LoRa #RP2040 #IoT

    kerry

    kerry

    9 Comments

    1 Star

  • LoST Board

    LoST Board

    The "LoST" Board is a Node that interfaces Industrial Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

    collinsemasi

    collinsemasi

    9 Comments

    1 Star

  • BLM02AX121SN1_CLONE

    BLM02AX121SN1_CLONE

    The BLM02AX121SN1# is a chip ferrite bead manufactured by Murata, designed to function as a resistor at noise frequencies, thereby minimizing resonance and maintaining signal integrity. This surface-mount device (SMD) features a compact size of 0.4mm x 0.2mm, making it ideal for noise suppression in small electronic equipment, such as PA modules for cellular phones. The component operates effectively across a wide frequency range (30MHz to several hundred MHz) without requiring a ground connection, making it suitable for circuits without stable ground lines. The BLM02AX121SN1# offers a rated current of 250mA at 125°C, a maximum DC resistance of 0.50Ω, and an impedance of 1200Ω at 100MHz with a tolerance of ±25%. It is available in two packaging options: bulk (bag) with a standard packing quantity of 1000 units and 180mm paper tape with 20000 units. The device is compliant with RoHS and REACH standards, ensuring its suitability for consumer and certain medical and industrial applications.

    sumprishar

    sumprishar

    1 Comment

    1 Star

  • PCB Business Card V2

    PCB Business Card V2

    Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back #template I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC-Make-Yours-With-NFC-QR-/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    rwj

    rwj

    1 Star

  • PCB Business Card V2

    PCB Business Card V2

    Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back #template I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC-Make-Yours-With-NFC-QR-/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    samanda

    samanda

    &

    samandarshana

    1 Star

  • PCB Business Card V2

    PCB Business Card V2

    Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back #template I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC-Make-Yours-With-NFC-QR-/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    shanzal

    shanzal

    1 Star

  • EV5920-5048-V-00A Evaluation Board

    EV5920-5048-V-00A Evaluation Board

    This is a recreation of the [EV5920-5048-V-00A](https://www.monolithicpower.com/en/ev5920-5048-v-00a.html) from MPS which demonstrates a MP5920 Hot-Swap controller commanding 5 MP5048 e-fuses in parallel. WIP Items: -Routing In flux, this project demonstrates hierarchal design through the use of modules. Additionally, parametric symbols are used extensively to improve schematic cleanliness. Components in the canvas are locked because their positions correspond to the same positions as the original layout. Changelog from Original MPS Design: - Not including GPIO2 or GPIO3 as included in the original board due to NC pin name on the IC. - PC1 and PC2 footprints are 5mm in pitch and 12.5mm in diameter rather than the 16mm diameter in the original layout. This change corresponds with the selected part more accurately. -Renamed Designators to be More Verbose

    vasy_skral

    vasy_skral

    1 Star

  • EV5920-5048-V-00A Evaluation Board

    EV5920-5048-V-00A Evaluation Board

    This is a recreation of the [EV5920-5048-V-00A](https://www.monolithicpower.com/en/ev5920-5048-v-00a.html) from MPS which demonstrates a MP5920 Hot-Swap controller commanding 5 MP5048 e-fuses in parallel. In Flux, this project demonstrates hierarchical design through the use of modules. Additionally, parametric symbols are used extensively to improve schematic cleanliness. Components in the canvas are locked because their positions correspond to the same positions as the original layout. Changelog from Original MPS Design: - Not including GPIO2 or GPIO3 as included in the original board due to NC pin name on the IC. - PC1 and PC2 footprints are 5mm in pitch and 12.5mm in diameter rather than the 16mm diameter in the original layout. This change corresponds with the selected part more accurately. -Renamed Designators to be More Verbose

    monolithicpower

    monolithicpower

    &

    jharwinbarrozo

    1 Star

  • ENVIRONMENTAL EXPOSURE RISK METER 6BLC

    ENVIRONMENTAL EXPOSURE RISK METER 6BLC

    Environmental exposure risk measuring device based on ESP32, ultraviolet light (UV) and CO2 gas sensor modules. It has a voltage booster based on MT3608 chip and a solar panel lithium battery charger with MPPT based on CN3791 chip.

    dacre

    dacre

    1 Star

  • The Green Dot 2040E5 Board nkFU

    The Green Dot 2040E5 Board nkFU

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

    kerry

    kerry

    1 Star

  • PLC input module v1

    PLC input module v1

    Seeduino XIAO C3 Industrial Input module

    sonarknight

    64 Comments

  • Framework Expansion Module Template csLE 1zdr

    Framework Expansion Module Template csLE 1zdr

    A Framework laptop expansion module template #template

    0xnightstalker

    49 Comments

  • Solar and Battery Evaluation Module

    Solar and Battery Evaluation Module

    Solar and battery monitor module for senior design project Anderson University 24-25.

    tbelteshazzart

    &

    39 Comments

  • Laptop Webcam Module

    Laptop Webcam Module

    The Open-Source Laptop Webcam Module is a critical component of our open-source laptop initiative. This module will provide high-definition video capture capabilities while adhering to the principles of open-source design. The module must integrate seamlessly with the laptop’s mainboard, ensuring compatibility, ease of assembly, and potential for future upgrades

    collinsemasi

    collinsemasi

    30 Comments

  • L293D Motor driver Module

    L293D Motor driver Module

    Dual motor driver based on L293D IC #Sublayout #Module #template #project-template #motor #L293D #driver #motordriver

    ruler

    22 Comments

  • TP5410 Module acsz

    TP5410 Module acsz

    This project is a TP5410-based Battery Management System (BMS) circuit. The TP5410 IC handles battery charging, voltage regulation, and protection. It uses various capacitor, resistor, and diode components along with LEDs for status indication, making it an ideal solution for portable electronic devices. #project #Template #charger #reusable #module #batterycharger #template #bms #TP5410 #topPowerASIC #toppower #toppowerasic

    fedepaj

    13 Comments

  • ESP-CAM Motherboard Module pH4K

    ESP-CAM Motherboard Module pH4K

    This project is a motherboard for the ESP32-CAM module, which enables easy and flexible WiFi camera applications. The motherboard provides power supply, programming interface, and GPIO expansion for the ESP32-CAM. It also supports external sensors for more functionality. #motherboard #WiFi #MCU #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

    krishnasrmcem

    11 Comments

  • Thermostat Main Module

    Thermostat Main Module

    ESP8684H4 based thermostat module which will control the heater. The module will have 18650 Li-Ion battery cell with 3.7V nominal voltage. The module also has a switch-mode buck NVDC power path which can simultaneously charge the battery and provide power to the system. The system voltage is 3.3V. Input voltage is 5V from USB-C. The system also contains a temperature, humidity and pressure sensor. The Wi-Fi and Bluetooth antenna implemented by PCB tracks.

    skriba91

    11 Comments

  • ESP32 RS485 (Modbus) Controller Module

    ESP32 RS485 (Modbus) Controller Module

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    kalai46

    9 Comments

  • WiFi Camera Module

    WiFi Camera Module

    This project uses an ESP32 microcontroller and OV2640 camera to create a WiFi-enabled digital camera. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #reusable #module #edge-computing #edgeComputing #espressif #template

    kerry

    kerry

    9 Comments

  • ESP32 RS485 (Modbus) Controller Module 1gwv

    ESP32 RS485 (Modbus) Controller Module 1gwv

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    marcos1970

    8 Comments

  • Arduino Watch Module 6TTY

    Arduino Watch Module 6TTY

    This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #project #Template #projectTemplate #reusable #module #simple-embedded #microchip #arduino #sublayout

    epicella

    7 Comments

  • ESP32 RS485 (Modbus) Controller Module

    ESP32 RS485 (Modbus) Controller Module

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    themurat

    5 Comments

  • ESP32 RS485 (Modbus) Controller Module 02e3 8a70

    ESP32 RS485 (Modbus) Controller Module 02e3 8a70

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    tyson0906

    5 Comments

  • ESP-CAM Motherboard Module 6pnG

    ESP-CAM Motherboard Module 6pnG

    This project is a motherboard for the ESP32-CAM module, which enables easy and flexible WiFi camera applications. The motherboard provides power supply, programming interface, and GPIO expansion for the ESP32-CAM. It also supports external sensors for more functionality. #motherboard #WiFi #MCU #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

    hatem0866

    5 Comments

  • ESP-CAM Motherboard Module i17d

    ESP-CAM Motherboard Module i17d

    This project is a motherboard for the ESP32-CAM module, which enables easy and flexible WiFi camera applications. The motherboard provides power supply, programming interface, and GPIO expansion for the ESP32-CAM. It also supports external sensors for more functionality. #motherboard #WiFi #MCU #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

    ronald123456

    5 Comments

  • ESP-CAM Motherboard Module qmdg

    ESP-CAM Motherboard Module qmdg

    This project is a motherboard for the ESP32-CAM module, which enables easy and flexible WiFi camera applications. The motherboard provides power supply, programming interface, and GPIO expansion for the ESP32-CAM. It also supports external sensors for more functionality. #motherboard #WiFi #MCU #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

    ananttater

    5 Comments

  • Arduino Watch Module 31Jun

    Arduino Watch Module 31Jun

    This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #project #Template #projectTemplate #reusable #module #simple-embedded #microchip #arduino #sublayout

    deucebot22

    5 Comments

  • ESP-CAM Motherboard Module

    ESP-CAM Motherboard Module

    This project is a motherboard for the ESP32-CAM module, which enables easy and flexible WiFi camera applications. The motherboard provides power supply, programming interface, and GPIO expansion for the ESP32-CAM. It also supports external sensors for more functionality. #motherboard #WiFi #MCU #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

    dhis

    5 Comments

  • ESP-CAM Motherboard Module tRri

    ESP-CAM Motherboard Module tRri

    This project is a motherboard for the ESP32-CAM module, which enables easy and flexible WiFi camera applications. The motherboard provides power supply, programming interface, and GPIO expansion for the ESP32-CAM. It also supports external sensors for more functionality. #motherboard #WiFi #MCU #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

    verger

    5 Comments

  • Framework Expansion Module Template

    Framework Expansion Module Template

    A Framework laptop expansion module template #template

    tyler-s

    5 Comments

  • Framework Expansion Module Template csLE

    Framework Expansion Module Template csLE

    A Framework laptop expansion module template #template

    jfb84

    3 Comments

  • ESP32 RS485 (Modbus) Controller Module 02e3 7cc7

    ESP32 RS485 (Modbus) Controller Module 02e3 7cc7

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    tyson0906

    3 Comments

  • VL53L0CXV0DH Module nCRQ

    VL53L0CXV0DH Module nCRQ

    This project is a reference design for a VL53L0CXV0DH-based sensor circuit. It incorporates the use of a Texas Instruments LP5907MFX-2.8/NOPB to regulate the supply voltage. #referenceDesign #VL53L0 #Module #template #LIDAR #sensor #distance #reusable #module #industrialsensing #stm #sublayout

    kaansen90

    3 Comments

  • Framework Expansion Module Template csLE

    Framework Expansion Module Template csLE

    A Framework laptop expansion module template #template

    jackmerrill

    3 Comments

  • LM2679 5V Module

    LM2679 5V Module

    This LM2679SX-ADJ reference design is a step-down voltage regulator providing a stable 5V output from a higher input voltage. Ideal for applications needing a regulated 5V supply. #referenceDesign #project #stepDown #voltageRegulator #5V #LM2679SX-ADJ #LM2679-ADJ #LM2679 #Module #subLayout #reusable #module #powermanagement #texas-instruments #sublayout

    mounika

    3 Comments

  • STC4054 Module

    STC4054 Module

    This project is a Lithium-ion battery charger circuit utilizing the STC4054 integrated circuit. It includes input and output connectors, a charging current programming resistor, decoupling capacitors, and a charge status indicator LED. The design can deliver up to 800mA charge current. #project #Template #charger #reusable #module #batterycharger #template #bms #STC4054 #stm

    deepnaik22

    3 Comments

  • ESP32-WROOM-32U Module

    ESP32-WROOM-32U Module

    This project is a reference design for an ESP32-WROOM-32U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

    bruceapplesauce

    3 Comments

  • ESP32 RS485 (Modbus) Controller Module

    ESP32 RS485 (Modbus) Controller Module

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    hitozg777

    2 Comments

  • ESP32 RS485 (Modbus) Controller Module

    ESP32 RS485 (Modbus) Controller Module

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    xgoun

    2 Comments

  • Arduino Watch Module

    Arduino Watch Module

    This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #project #Template #projectTemplate #reusable #module #simple-embedded #microchip #arduino #sublayout

    ahoth

    1 Comment

  • TP5410 Module

    TP5410 Module

    This project is a TP5410-based Battery Management System (BMS) circuit. The TP5410 IC handles battery charging, voltage regulation, and protection. It uses various capacitor, resistor, and diode components along with LEDs for status indication, making it an ideal solution for portable electronic devices. #project #Template #charger #reusable #module #batterycharger #template #bms #TP5410 #topPowerASIC #toppower #toppowerasic

    rttgnck

    1 Comment

  • WiFi Camera Module

    WiFi Camera Module

    This project uses an ESP32 microcontroller and OV2640 camera to create a WiFi-enabled digital camera. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #reusable #module #edge-computing #edgeComputing #espressif #template

    sulo4

    1 Comment

  • ESP-CAM Motherboard Module 269c

    ESP-CAM Motherboard Module 269c

    This project is a motherboard for the ESP32-CAM module, which enables easy and flexible WiFi camera applications. The motherboard provides power supply, programming interface, and GPIO expansion for the ESP32-CAM. It also supports external sensors for more functionality. #motherboard #WiFi #MCU #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

    rexf

    &

    1 Comment

  • Framework Expansion Module Template

    Framework Expansion Module Template

    A Framework laptop expansion module template #template

    0xnightstalker

    1 Comment

  • Framework Expansion Module Template csLE

    Framework Expansion Module Template csLE

    A Framework laptop expansion module template #template

    0xnightstalker

    1 Comment

  • Raspberry Pi Compute Module 5 wwRk

    Raspberry Pi Compute Module 5 wwRk

    Compute Module 5 is a powerful and scalable system on module with a 64-bit Arm processor @ 2.4GHz, an I/O controller, video and PCIe interfaces, and a range of wireless, SDRAM and eMMC options. raspberry pi5 #rpi #pi

    awright424

    1 Comment

  • ESP32 RS485 (Modbus) Controller Module 02e3 8a70 kRAw

    ESP32 RS485 (Modbus) Controller Module 02e3 8a70 kRAw

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    duraikb

    1 Comment

  • ESP32 RS485 (Modbus) Controller Module 02e3 8a70

    ESP32 RS485 (Modbus) Controller Module 02e3 8a70

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    duraikb

    1 Comment

  • ESP-CAM Motherboard Module 1cnL

    ESP-CAM Motherboard Module 1cnL

    This project is a motherboard for the ESP32-CAM module, which enables easy and flexible WiFi camera applications. The motherboard provides power supply, programming interface, and GPIO expansion for the ESP32-CAM. It also supports external sensors for more functionality. #motherboard #WiFi #MCU #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

    lcidral

    1 Comment