Wireless Power Receiver PMIC 20-VQFN (3.5x4.5) BQ51013BRHLT is a wireless power receiver integrated circuit from Texas Instruments designed for inductive power transfer applications compliant with wireless charging standards. The device integrates power rectification, voltage regulation, communication control, and protection circuitry to enable efficient wireless charging for portable and embedded electronic devices. This receiver IC is optimized for low-power wireless charging systems and supports seamless energy transfer from compatible transmitter platforms without the need for physical connectors. It provides regulated power output suitable for charging batteries and powering embedded systems while incorporating dynamic power management, foreign object detection support, thermal protection, and overvoltage protection for safe operation. The BQ51013BRHLT is widely used in wearable electronics, wireless sensor platforms, medical devices, mobile accessories, handheld products, and compact consumer electronics requiring cable-free charging capability. Its compact package and high integration level simplify PCB layout and reduce external component requirements for space-constrained wireless power designs. #commonpartslibrary #wirelesscharging #powermanagement #texasinstruments #wirelesspower #batterycharging #embeddedhardware #portableelectronics #electronicscomponents #inductivecharging

Temperature Sensor Digital, Local -55°C ~ 150°C 16 b 6-WSON (2x2) The TMP117AIDRVR is a high-precision digital temperature sensor manufactured by Texas Instruments. The device provides accurate temperature measurements through an I²C-compatible digital interface and is optimized for applications requiring medical-grade accuracy, low power consumption, and compact PCB footprint. The sensor integrates a precision temperature sensing element, analog-to-digital converter, calibration memory, and digital interface into a single compact package. The device supports continuous conversion and shutdown operating modes, enabling efficient thermal monitoring in battery-powered and always-on systems. Internal calibration minimizes external component requirements while providing highly linear and repeatable temperature measurements across an extended operating range. The TMP117AIDRVR is commonly used in industrial controls, wearable electronics, healthcare equipment, environmental monitoring systems, battery management systems, consumer electronics, and precision instrumentation. Electrical Characteristics Supply voltage supports low-voltage digital systems and portable electronics applications. Ultra-low operating current enables long battery life in energy-sensitive designs. Integrated EEPROM allows programmable offset correction and configuration storage. Digital output eliminates the need for external ADC circuitry. High measurement resolution supports precision thermal monitoring applications. Low self-heating characteristics improve measurement stability and accuracy. Functional Features High-accuracy digital temperature sensing. I²C and SMBus compatible communication interface. Programmable alert functionality for thermal threshold monitoring. Continuous conversion and low-power shutdown operating modes. Integrated non-volatile memory for user configuration storage. Wide operating temperature range for industrial and commercial environments. Fast conversion timing suitable for real-time monitoring systems. Factory-calibrated performance requiring minimal external calibration. Package Information Package type is WSON with compact surface-mount footprint suitable for dense PCB layouts. Moisture-sensitive package designed for automated assembly processes. Lead-free and RoHS-compliant construction. Typical Applications Medical thermometers and patient monitoring systems. Industrial temperature monitoring equipment. Battery-powered portable electronics. HVAC and environmental sensing systems. Data acquisition and instrumentation systems. Server and embedded thermal management applications. Consumer electronics requiring precision thermal sensing. #commonpartslibrary #integratedcircuit #temperaturesensor

BS-11-B2CA001 is a tactile pushbutton switch designed for user input and control interface applications in embedded and electronic systems. The switch features a compact mechanical structure optimized for reliable actuation, consistent tactile feedback, and long operational life in consumer, industrial, and portable electronic devices. This component is commonly used for power control, menu navigation, reset functions, mode selection, and general-purpose human-machine interface input in compact electronic assemblies. Its surface-mount configuration supports automated PCB assembly and enables integration into space-constrained product designs while maintaining dependable switching performance. The BS-11-B2CA001 is engineered to provide stable contact operation with low contact resistance and durable mechanical reliability under repeated actuation cycles. It is suitable for applications including handheld electronics, wearable devices, industrial control panels, communication equipment, development boards, and embedded user interface systems. #commonpartslibrary #tactileswitch #pushbutton #switch #embeddedhardware #electronicscomponents #humanmachineinterface #surfacemountdevice #industrialelectronics #portableelectronics

Z3OC1T8219731 is a miniature cylindrical core SMT vibration motor designed for compact electronic devices requiring haptic feedback, alert notifications, or vibration functions. It features a 4 mm × 3 mm cylindrical core motor structure with an eccentric rotating mass (ERM) and is optimized for low-voltage battery-powered applications. Key Features Type: Cylindrical Core SMT (Surface-Mount) Vibration Motor Rated Voltage: 2.7 VDC Operating Voltage Range: 2.3 V to 3.2 VDC Rated Speed: 14,000 ± 2,500 RPM Rated Current: 85 mA max Rotation Direction: Clockwise (CW) Motor Construction: 4 mm × 3 mm cylindrical core design Commutation: Metal brush and commutator Operating Temperature: −20°C to +70°C Storage Temperature: −40°C to +85°C Approximate Weight: 0.6 g RoHS Compliant SMT/Reflow Soldering Compatible for automated assembly processes. Typical Applications Wearable devices Smart watches Bluetooth earbuds Mobile phones Medical handheld devices Consumer electronics requiring vibration alerts Compact IoT products and haptic feedback systems.

Battery Management ICs BQ25120AYFPT DSBGA-25_L2.6-W2.5-R5-C5-P0.40-BL LCSC Part Number: C2861317 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments bq25120A highly integrated low-Iq battery charge management IC for wearables and IoT devices, supports up to 300mA battery charge current, configurable 300mA buck regulator with 1.8V default output, configurable load switch or 100mA LDO output, power path management, battery voltage regulation from 3.6V to 4.65V in 10mV steps, configurable termination current down to 500µA, simple voltage-based battery monitor, push-button wake-up and reset, I2C control interface, 3.4V to 5.5V input voltage range, low quiescent current, suitable for smart watches, fitness accessories, medical wearables and rechargeable toys, 25-ball DSBGA 2.5 x 2.5mm package. Search Keywords: bq25120A, Texas Instruments bq25120A, TI bq25120A, BQ25120A battery charger, bq25120A PMIC, bq25120A wearable charger, bq25120A IoT charger, low Iq battery charger IC, integrated battery charge management IC, 300mA battery charger, power path battery charger, I2C battery charger, bq25120A buck regulator, bq25120A LDO, bq25120A DSBGA-25, bq25120A 2.5x2.5mm, bq25120A datasheet Hashtags: #bq25120A #BQ25120A #TexasInstrumentsBQ25120A #TIBatteryCharger #BatteryChargerIC #BatteryChargeManagement #WearablePMIC #IoTPMIC #LowIqCharger #PowerPathManagement #300mACharger #BuckRegulatorPMIC #I2CCharger #LiIonCharger #WearableCharger #DSBGA25 #25BallDSBGA

Small and thin surface-mount crystal units NX1612SA-32MHZ-STD-CIS-3 is a compact surface-mount quartz crystal oscillator designed for stable clock generation in embedded electronic systems and wireless communication devices. Manufactured in a miniature ceramic package, this crystal provides precise frequency control with low phase noise and high frequency stability, making it suitable for microcontrollers, RF modules, IoT devices, and portable electronics. The device operates at a nominal frequency of thirty-two megahertz and is optimized for low power consumption and reliable startup characteristics. Its compact footprint enables integration into high-density PCB layouts while maintaining strong resistance to environmental stress and mechanical vibration. The crystal is compatible with standard oscillator circuits and supports stable operation across industrial temperature ranges. This component is commonly used in timing reference applications, communication systems, sensor modules, wearable devices, and battery-powered embedded platforms requiring accurate and stable clock signals. #commonpartslibrary #crystaloscillator #timingdevice #frequencycontrol #embeddedhardware #wirelesssystems #rfdesign #iotdevices #electronicscomponents #surfacemountdevice

High-Accuracy, Low-Power, Digital Temperature Sensor With SMBus- and I2C-Compatible Interface The TMP117 is a high-precision digital temperature sensor. It is designed to meet ASTM E1112 and ISO 80601 requirements for electronic patient thermometers. The TMP117 provides a 16-bit temperature result with a resolution of 0.0078 °C and an accuracy of up to ±0.1 °C across the temperature range of –20 °C to 50 °C with no calibration. The TMP117 has in interface that is I 2C- and SMBus™-compatible, programmable alert functionality, and the device can support up to four devices on a single bus. Integrated EEPROM is included for device programming with an additional 48-bits memory available for general use. The low power consumption of the TMP117 minimizes the impact of self-heating on measurement accuracy. The TMP117 operates from 1.7 V to 5.5 V and typically consumes 3.5 μA. For non-medical applications, the TMP117 can serve as a single chip digital alternative to a Platinum RTD. The TMP117 has an accuracy comparable to a Class AA RTD, while only using a fraction of the power of the power typically needed for a PT100 RTD. The TMP117 simplifies the design effort by removing many of the complexities of RTDs such as precision references, matched traces, complicated algorithms, and calibration. The TMP117 units are 100% tested on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 accredited standards. • TMP117 high-accuracy temperature sensor – ±0.1 °C (maximum) from –20 °C to 50 °C – ±0.15 °C (maximum) from –40 °C to 70 °C – ±0.2 °C (maximum) from –40 °C to 100 °C – ±0.25 °C (maximum) from –55 °C to 125 °C – ±0.3 °C (maximum) from –55 °C to 150 °C • Operating temperature range: –55 °C to 150 °C • Low power consumption: – 3.5-μA, 1-Hz conversion cycle – 150-nA shutdown current • Supply range: – 1.7 V to 5.5 V from –55 °C to 70 °C – 1.8 V to 5.5 V from –55 °C to 150 °C • 16-bit resolution: 0.0078°C (1 LSB) • Programmable temperature alert limits • Selectable averaging • Digital offset for system correction • General-purpose EEPROM: 48 bits • NIST traceability • SMBus™, I2C interface compatibility • Medical grade: meets ASTM E1112 and ISO 80601-2-56 • RTDs replacement: PT100, PT500, PT1000 2 Applications • Electronic thermometers • Wireless environmental sensors • Thermostats • Automotive test equipment • Wearable fitness and activity monitors • Cold chain asset tracking • Gas meters and heat meters • Temperature transmitters #CommonPartsLibrary #Sensor

Flat Vibration Motor 3V Motors - AC, DC RoHS LCM0827A3038F is a compact coin-type (flat) vibration motor manufactured by LEADER. It is designed to provide haptic feedback, vibration alerts, and notification functions in portable electronic devices such as smartphones, smartwatches, wearable devices, medical equipment, and other compact consumer products. The motor operates from a low-voltage DC supply and offers reliable vibration performance in a small form factor. Key Features Coin-type flat vibration motor for space-constrained designs. Rated voltage: 3.0 VDC. Operating voltage range: 2.7 V to 3.3 VDC. Rated current: 80 mA maximum. Rated speed: Approximately 14,000 rpm (typical). Minimum starting voltage: 2.3 VDC. Vibration strength: 0.85 G minimum (peak). Bidirectional rotation capability (CW or CCW). Wide operating temperature range: −20°C to +60°C. Compact dimensions: approximately Φ8.0 mm × 3.15 mm. RoHS compliant. Typical Applications Smartphones and mobile devices Smartwatches and wearable electronics Portable medical devices Handheld consumer electronics Alert and notification systems requiring haptic feedback

Adafruit 2472 BNO055 breakout Adafruit BNO055 Absolute Orientation Sensor is a 9-DoF intelligent motion tracking module based on the Bosch BNO055 system-in-package sensor. The device integrates a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, and an onboard ARM Cortex-M0 microcontroller running Bosch sensor fusion algorithms. Unlike traditional IMUs, the BNO055 directly outputs absolute orientation data in Euler angles, quaternions, linear acceleration, gravity vectors, and calibration information, eliminating the need for complex sensor fusion calculations on the host MCU. The sensor communicates via I²C or UART interfaces and is widely used in robotics, drones, autonomous vehicles, VR/AR systems, motion tracking, navigation, balancing robots, wearable devices, and orientation sensing applications. Search Keywords: BNO055, Adafruit BNO055, Absolute Orientation Sensor, 9DOF Sensor, IMU Sensor, Bosch BNO055, Sensor Fusion IMU, Orientation Sensor, Quaternion Sensor, Euler Angle Sensor, Motion Tracking Sensor, Accelerometer Gyroscope Magnetometer, AHRS Sensor, Robotics IMU, Drone Orientation Sensor, Wearable Motion Sensor, Navigation Sensor, I2C IMU Sensor, UART IMU Sensor, Absolute Position Sensor Hashtags: #BNO055 #Adafruit #BoschSensortec #IMU #9DOF #OrientationSensor #MotionTracking #SensorFusion #Quaternion #AHRS #Accelerometer #Gyroscope #Magnetometer #Robotics #DroneTechnology #EmbeddedSystems #IoTDevices #ElectronicsDesign #PCBDesign #HardwareEngineering

LSM6DSO32X is a low-power 6-axis IMU (Inertial Measurement Unit) from STMicroelectronics that integrates a 3-axis accelerometer with up to ±32g full-scale range and a 3-axis gyroscope with selectable ranges up to ±2000 dps. The device features an embedded Machine Learning Core (MLC), Finite State Machine (FSM), pedometer, step detector, tilt detection, motion classification, and smart sensor processing functions, enabling advanced edge AI and sensor fusion applications without continuous MCU intervention. Communication is supported through SPI, I²C, and MIPI I3C interfaces. Designed for wearable devices, smart watches, asset tracking, IoT products, motion analysis, gesture recognition, navigation systems, and low-power embedded applications. Search Keywords: LSM6DSO32X, ST LSM6DSO32X, 6-axis IMU, inertial measurement unit, accelerometer gyroscope combo, 3-axis accelerometer, 3-axis gyroscope, machine learning sensor, embedded AI sensor, motion sensor, MEMS sensor, pedometer sensor, step counter sensor, tilt detection sensor, gesture recognition sensor, SPI IMU, I2C IMU, I3C sensor, wearable sensor, navigation sensor, sensor fusion IMU, smart motion sensor, asset tracking sensor Hashtags: #LSM6DSO32X #STMicroelectronics #IMU #MEMS #Accelerometer #Gyroscope #MotionSensor #MachineLearningCore #EmbeddedAI #SensorFusion #Pedometer #Wearables #IoT #AssetTracking #Navigation #GestureRecognition #I2C #SPI #I3C #ElectronicComponents

Charger IC Lithium Ion 16-VQFN (3x3) The BQ24075RGTR is a standalone linear charger and power-path management integrated circuit developed by Texas Instruments for single-cell lithium-ion and lithium-polymer battery applications. The device is designed for portable and space-constrained electronic systems requiring efficient battery charging, USB compatibility, and simultaneous system power delivery. The integrated dynamic power-path management architecture enables the system load to be powered while independently charging the battery. The charger supports operation from either a USB power source or an external adapter and includes programmable charging and input current limiting functions for optimized power management. The device incorporates multiple protection and monitoring features including thermal regulation, overvoltage protection, reverse current protection, battery temperature monitoring, and safety timers. The BQ24075RGTR also provides battery disconnect capability through the SYSOFF control function, making it suitable for low-power and portable embedded designs. Typical applications include portable consumer electronics, handheld instruments, wearable devices, wireless accessories, battery-powered IoT equipment, medical portable systems, and embedded rechargeable products. Device Features Standalone single-cell lithium-ion and lithium-polymer battery charger Integrated power-path management architecture Simultaneous battery charging and system power support USB-compatible input current limiting Programmable fast-charge current capability Dynamic power management for unstable or limited input sources Battery temperature monitoring through external thermistor input Integrated thermal regulation and protection mechanisms Reverse current, short-circuit, and input overvoltage protection Programmable safety timers for pre-charge and fast-charge modes Charging status and power-good indication outputs Battery disconnect functionality through SYSOFF control Compact surface-mount VQFN package implementation Electrical Characteristics Designed for single-cell lithium-ion or lithium-polymer batteries Fixed battery regulation voltage suitable for standard single-cell charging Supports USB and external adapter input operation Linear charging topology Wide operating temperature range for portable and industrial applications Programmable input current limit for USB compliance and adapter compatibility Package Information Package Type: VQFN Pin Configuration: Sixteen-pin package Mounting Style: Surface mount Package Dimensions: Compact three-millimeter square footprint Functional Overview The BQ24075RGTR manages power distribution between the external input source, the system load, and the rechargeable battery. When external power is present, the device prioritizes powering the system while charging the battery according to programmable charging parameters. Dynamic power management prevents excessive loading of weak USB or adapter sources by automatically reducing charging current when necessary. Thermal regulation circuitry continuously monitors device temperature and adjusts charging operation to maintain safe operating conditions. Additional integrated protection functions ensure reliable operation during fault conditions such as input overvoltage, battery temperature abnormalities, reverse current flow, and output short circuits. #commonpartslibrary #integratedcircuit #powermanagement

Humidity, Temperature 0 ~ 100% RH I2C ±2% RH 8 s Surface Mount The SHTC3-TR-10KS is an ultra-low-power digital humidity and temperature sensor from Sensirion designed for space-constrained and battery-powered applications such as wearables, mobile devices, IoT sensors, smart home products, and environmental monitoring systems. It integrates calibrated humidity and temperature sensing elements with a digital I²C interface in a compact 2 mm × 2 mm DFN package. Key Features Measures both relative humidity and temperature Humidity accuracy of up to ±2% RH Wide humidity measurement range: 0% to 100% RH Integrated digital I²C interface Ultra-low power consumption optimized for battery-operated devices Supply voltage range: 1.62 V to 3.6 V Compact 4-pin DFN (2 × 2 mm) surface-mount package Fully calibrated and temperature compensated Fast response time suitable for real-time environmental sensing Operating temperature range: −40°C to +125°C Supports sleep and low-power operating modes for portable electronics Typical Applications Wearable devices Smartphones and tablets HVAC and smart thermostats IoT environmental monitoring Home automation systems Portable weather stations Consumer electronics #CommonPartsLibrary #Sensor

ADXL345 iMEMS® Accelerometer, 3 Axis Sensor Evaluation Board The ADXL345 measures acceleration in three axes (X, Y, Z) and outputs digital data via either I²C or SPI interfaces. It is widely used in applications like tilt sensing, vibration monitoring, free-fall detection, and motion-based user interfaces. Its high resolution (up to 13-bit) allows it to detect very small changes in motion, making it suitable for both consumer electronics and industrial applications. Key Features 3-axis acceleration measurement (X, Y, Z) Selectable measurement ranges: ±2g, ±4g, ±8g, ±16g High resolution (13-bit) with up to 4 mg/LSB sensitivity Digital output interfaces: I²C and SPI Low power consumption: ideal for battery-powered devices Built-in motion detection functions: Tap and double-tap detection Free-fall detection Activity and inactivity monitoring Wide bandwidth range: supports various data rates for different applications Operating voltage: typically 2.0V to 3.6V Compact package: small LGA form factor suitable for space-constrained designs Common Applications Smartphones and tablets (screen rotation, motion sensing) Wearable devices and fitness trackers Gaming controllers Robotics and drones Vibration and shock monitoring systems #commonpartslibrary #developmentboard #evaluationboard #sensor

BergStak 0.40mm, 100 position, Receptacle, 4mm stack height 100 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold 10164227-1004A1RLF is a high-density board-to-board mezzanine connector from Amphenol ICC (FCI), part of the BergStak® 0.40 mm series. It is designed for compact electronic systems that require reliable high-speed signal interconnection between stacked PCBs. This component is a 100-position, surface-mount receptacle connector with center strip contacts. It uses a 0.40 mm pitch to support very high pin density in a small footprint. It is commonly used in applications like smartphones, industrial modules, embedded computing, and other space-constrained electronic assemblies. Key Features 100 positions for high-density signal routing 0.40 mm fine pitch for compact PCB designs Board-to-board mezzanine (receptacle type) Surface-mount (SMT) mounting for automated assembly Center strip contact design for stable mating Gold-plated contacts for improved conductivity and corrosion resistance Mated stacking height around 4 mm Low-profile design suitable for thin electronic devices Typical Applications Smartphones and mobile devices Wearable electronics Industrial control modules Embedded computing boards Communication and networking equipment #AmphenolICC #FCI #BergStak #BoardToBoardConnector #MezzanineConnector #0_40mmPitch #SurfaceMount #HighDensityConnector #100PositionConnector #ElectronicsComponents

ETA1061 is an ultra-low quiescent current synchronous boost converter from ETA Solutions designed for battery-powered and energy-constrained applications. The device features only 1 µA quiescent current, startup from input voltages as low as 0.8 V, and can deliver up to 5 V at 0.4 A from a 3 V input source. Its integrated synchronous rectifier, output disconnect function, reverse current blocking, and short-circuit protection eliminate the need for external Schottky diodes while maximizing efficiency up to 94%. Operating at a fixed 1.4 MHz switching frequency, ETA1061 enables compact PCB designs using small inductors and ceramic capacitors. It is ideal for IoT devices, wearables, smart sensors, power banks, portable electronics, energy harvesting systems, and ultra-low-power battery-operated products. Search Keywords: ETA1061, ETA Solutions ETA1061, Synchronous Boost Converter, Ultra Low IQ Boost Converter, 1uA Quiescent Current Converter, 0.8V Startup Converter, DC DC Step Up Converter, Low Power Boost Regulator, Battery Powered Converter, Energy Harvesting Power Supply, IoT Power Management IC, Wearable Electronics Power IC, Power Bank Converter, 5V Boost Converter, High Efficiency Boost Converter, SOT23-6 Boost Converter, DFN2x2 Boost Converter, Portable Electronics Power Supply, Ultra Low Power DC DC Converter, Reverse Current Protection Converter Hashtags: #ETA1061 #ETASolutions #BoostConverter #DCDCConverter #PowerManagement #LowPowerDesign #UltraLowPower #EnergyHarvesting #BatteryPowered #IoTDevices #WearableElectronics #PowerBank #EmbeddedSystems #PowerElectronics #ElectronicsDesign #PCBDesign #HardwareEngineering #PortableElectronics #VoltageRegulator #BatteryManagement

Battery Battery Monitor IC Lithium Ion 9-DSBGA The BQ27220YZFR is a highly integrated single-cell battery fuel gauge IC developed for rechargeable lithium-ion and lithium-polymer battery applications. The device utilizes Texas Instruments’ Impedance Track™ algorithm to provide highly accurate battery capacity measurement, state-of-charge estimation, runtime prediction, and battery health monitoring across varying load and temperature conditions. The device is designed for compact portable electronics, wearable devices, IoT products, handheld instruments, and low-power embedded systems requiring precise battery monitoring and extended operating life. The BQ27220YZFR supports system-side fuel gauging without requiring battery pack-side electronics, simplifying battery integration and reducing overall system cost. The fuel gauge continuously monitors battery voltage, current, and temperature to estimate available capacity, remaining runtime, full charge capacity, and state-of-health information. Integrated low-power operation enables ultra-low standby current consumption suitable for always-on battery-powered products. Communication with the host processor is implemented through a standard I²C interface, allowing configuration access, telemetry reporting, and battery parameter monitoring. The device also integrates protection and alert functionality through programmable interrupt outputs and battery condition monitoring features. The BQ27220YZFR is optimized for use with single-cell lithium-based chemistries and supports learning cycles for adaptive battery characterization over product lifetime. Internal data flash memory stores battery profile information and calibration parameters to improve long-term gauging accuracy. The device is supplied in a compact lead-free wafer chip-scale package suitable for space-constrained PCB designs and portable electronics requiring minimal footprint and low-profile assembly. Electrical Characteristics Device Type Single-cell battery fuel gauge and battery monitor IC Battery Chemistry Support Lithium-ion and lithium-polymer rechargeable batteries Input Voltage Range Supports single-cell battery operation Fuel Gauging Method Impedance Track™ algorithm Communication Interface I²C serial interface Measurement Functions Battery voltage monitoring Battery current monitoring Battery temperature monitoring State-of-charge estimation Remaining capacity calculation Full charge capacity estimation State-of-health reporting Runtime prediction Power Consumption Ultra-low operating current for portable applications Temperature Monitoring External thermistor support Host Alert Features Interrupt and alert reporting capability Data Storage Integrated nonvolatile configuration memory Calibration Features Automatic learning and battery characterization support Protection Monitoring Battery condition and system monitoring functions Package Type DSBGA wafer chip-scale package Mounting Style Surface mount Operating Temperature Range Industrial temperature operation suitable for portable electronics Functional Features High-accuracy fuel gauging over battery lifetime Adaptive battery modeling and aging compensation Low-power operation for battery-powered systems Integrated battery profiling capability Real-time remaining runtime estimation Automatic battery learning cycles Compact PCB footprint for portable devices System-side implementation without smart battery pack requirement Programmable battery alert functionality Support for low-power embedded processors and mobile systems Optimized for wearable and IoT applications RoHS compliant and lead-free package construction #commonpartslibrary #integratedcircuit #powermanagement #batterymanagement

0.35 BB CONN. H=0.6 SSB6 RP REC ASSY 5050660622 is a 6-position board-to-board (mezzanine) receptacle connector from the Molex SlimStack™ Armor 505066 Series. It is designed for compact electronic devices where a very low-profile connection between two PCBs is required. The connector features a fine 0.35 mm pitch, 0.60 mm mated height, and surface-mount termination, making it suitable for smartphones, wearables, IoT devices, cameras, and other space-constrained applications. Key Features 6 circuits (contacts) for board-to-board interconnection. 0.35 mm pitch for high-density PCB designs. Ultra-low 0.60 mm mated height to minimize product thickness. 2-row connector configuration for efficient space utilization. Surface-mount (SMT) mounting for automated assembly. Armor Nail design improves solder joint strength and mechanical retention. Gold-plated contacts for reliable electrical performance and corrosion resistance. 50 V AC/DC voltage rating. Up to 0.3 A per contact current rating. Operating temperature range: -40°C to +85°C. Liquid Crystal Polymer (LCP) housing for high heat resistance during reflow soldering. 30 mating cycle durability. Typical Applications Smartphones and tablets Wearable devices Wireless modules Portable medical devices Cameras and imaging equipment Compact consumer electronics #CommonPartsLibrary #Connector

Infrared (IR), Visible Emitter 536nm, 660nm, 950nm 1.3V, 1.9V, 2.3V 40mA, 80mA, 200mA 3.7mW/sr @ 80mA 120° 8-SMD, No Lead The SFH 7018A is a high-performance 3-in-1 multi-emitter LED module from ams OSRAM designed for optical vital-sign monitoring applications. It integrates green, red, and infrared LEDs into a compact reflective QFN package optimized for wearable health devices such as smartwatches, fitness bands, pulse oximeters, and medical monitoring equipment. The device features a dual-cavity optical structure that minimizes optical interference between emitters, improving heart-rate and SpO₂ measurement accuracy. Key Features Integrated green, red, and infrared LEDs in one package Wavelengths: Green: 536 nm Red: 660 nm Infrared: 950 nm Optimized for: Heart-rate monitoring SpO₂ sensing PPG (photoplethysmography) Highly reflective QFN SMT package Advanced 2-cavity design for reduced optical crosstalk Low forward voltage operation optimized for battery-powered devices Can operate without a boost converter in many designs Wide viewing angle: 120° Surface-mount package: 8-SMD, no lead Operating temperature range: −40°C to +85°C Emitters can be driven independently Suitable for compact wearable and medical electronics #CommonPartsLibrary #LED #Infrared

27 Hz ~ 18 kHz Digital, I2S Microphone MEMS (Silicon) 1.62 V ~ 1.98 V Omnidirectional (-37dB ±1dB @ 94dB SPL) Solder Pads TDK InvenSense T5848 TDK T5848 is a low-noise digital MEMS microphone with a bottom-port acoustic interface and industry-standard I²S digital audio output. The device integrates a MEMS microphone element, impedance converter, ADC, decimation filtering, anti-aliasing filtering, power management, and a 24-bit digital audio interface in a compact 3.5 mm × 2.65 mm × 0.98 mm package. The T5848 supports multiple operating modes including High Quality, Low Power, Sleep, and Always-On Voice (AOV) modes, making it ideal for battery-powered and voice-activated applications. With up to 68 dBA SNR, 133 dB SPL acoustic overload point, and extended frequency response from 27 Hz to 18 kHz, the T5848 is optimized for wearables, IoT devices, smart TVs, gaming systems, teleconferencing equipment, voice assistants, and always-listening audio applications. Search Keywords: T5848, TDK T5848, MEMS Microphone, Digital MEMS Microphone, I2S Microphone, Bottom Port Microphone, Always On Voice Microphone, AOV Microphone, Low Power MEMS Microphone, Wearable Microphone, IoT Audio Sensor, Voice Recognition Microphone, Digital Audio Input, 24-bit I2S Microphone, DSP Microphone, Smart Speaker Microphone, Voice Assistant Microphone, TDK InvenSense Microphone, Teleconference Audio Microphone, Embedded Audio Sensor Hashtags: #T5848 #TDK #InvenSense #MEMSMicrophone #DigitalMicrophone #I2SMicrophone #AudioSensor #AlwaysOnVoice #VoiceRecognition #WearableElectronics #IoTDevices #EmbeddedAudio #VoiceAssistant #SmartDevices #DSP #ElectronicsDesign #PCBDesign #EmbeddedSystems #HardwareEngineering #AudioElectronics

ESP32-C3-MINI-1 ESP32-C 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® 5.x (BLE) Transceiver 2.4GHz Evaluation Board ESP32-C3-DevKitM-1 is a compact entry-level development board from Espressif Systems based on the ESP32-C3-MINI-1 module. It integrates a 32-bit RISC-V single-core microcontroller, 2.4 GHz Wi-Fi, and Bluetooth Low Energy (BLE) connectivity, making it suitable for IoT devices, embedded applications, smart sensors, and wireless control projects. The board exposes most GPIO pins through headers for easy prototyping and supports programming through USB. Key Features: 32-bit RISC-V Single-Core Processor Based on ESP32-C3 SoC architecture Clock frequency up to 160 MHz Wireless Connectivity Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 Low Energy (BLE) support Memory 4 MB embedded Flash memory inside the ESP32-C3-MINI-1 module GPIO and Peripheral Interfaces Multiple programmable GPIO pins Supports interfaces such as: SPI UART I²C I²S PWM ADC USB Serial/JTAG Development Board Features Built-in ESP32-C3-MINI-1 module with PCB antenna USB interface for programming and power 5 V to 3.3 V onboard voltage regulator Breadboard-friendly pin headers Applications IoT gateways Smart home devices Wireless sensors Industrial automation Wearable electronics Embedded control systems #ESP32C3 #ESP32 #DevKitM1 #Espressif #RISCVD #WiFiMCU #BluetoothLE #IoT #EmbeddedSystems #Microcontroller #WirelessModule #SmartDevices #ElectronicsDesign #Prototyping