Proyecto de riego automatico, utilizando un esp32, con conexión wifi, toma de temperatura ambiente y humedad ambiente con un densor modelo DH. Varias tomas (3) de la humedad de la tierra mediante un sensor capacitivo, Salida para activar tres electrovalvulas de 12 voltios. Alimentación o por baterías o por paneles solares

This project is a distance detecting sensor circuit build around GP2Y0D805Z0F IC from SHARP/Socle Technology. It includes decoupling capacitors, feedback resistors, and a LED for signal indication, with power being supplied via the J1 connector. #referenceDesign #industrialsensing #sharp #template #reference-design

sensor de nivel de agua

El BNO055 es un sensor que incluye todos los sensores necesarios con compensación de temperatura así como un potente microcontrolador ARM Cortex-M0 que procesa y realiza todos los cálculos matemáticos, todo eso en un solo chip.

This project is a distance detecting sensor circuit build around GP2Y0D805Z0F IC from SHARP/Socle Technology. It includes decoupling capacitors, feedback resistors, and a LED for signal indication, with power being supplied via the J1 connector. #referenceDesign #industrialsensing #sharp #template #reference-design

Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

Smart Thermostat design using an ESP32 module for WiFi connectivity and a BME680 sensor for environmental monitoring. The user interface includes an E-ink display and an encoder for settings adjustment. Power: USB and Battery Movement sensor

NRF52840 evaluation board with a battery charger (BQ24072), display(Adafruit 1.47" 172x320 ST7789), and a trackball sensor (PAT9130)

This project is a Bluetooth-controlled smart mirror design. It uses an ESP32-MINI-1 for Bluetooth connectivity, an MPU-6050 IC sensor for gesture control, and a RGB LED for visual feedback. The design also comprises of other components like capacitors, resistors, and a USB-C connector for power. #referenceDesign #edge-computing #edgeComputing #template #reference-design #reusable #module #edge-computing #edgeComputing #sublayout #esp32 #lazer #sensor

Environmental exposure risk measuring device based on ESP32, ultraviolet light (UV) and CO2 gas sensor modules. It has a voltage booster based on MT3608 chip and a solar panel lithium battery charger with MPPT based on CN3791 chip.

The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

El sensor RCWL-0516 es una alternativa a los tradicionales detectores de movimiento infrarrojos PIR. Detecta cualquier objeto que se esté moviendo, independientemente de su temperatura.

Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

This project is a Wearable AI Camera designed to integrate multiple components such as a Murata Bluetooth module, Crypto controller, and various sensors like the STMicroelectronics Time-of-Flight sensor and microphone. It's powered by a diverse set of power nets and connects through different communication protocols. #wearableDevices

Welcome to your new project. Imagine what you can build here.

An I2C extension shield with 6 shielded ethernet ports and a TCA9548 breakout board. This board is for the target side, any microcontroller with a standard Arduino header can use it. With proper target side hardware and an SSTP ethernet cable, the board provides robust i2c communication over 10ft(could be longer, haven't tested it yet) with a bitrate of 400kHz under a noisy environment( near motors, power cables, switches, etc). The shield board provides power to the target side and can power the i2c device. The board also supports drdy trigger, which is available on many i2c sensors. The TCA9548 breakout board is for a scenario in which all of your i2c devices have the same address. #Arduino #Uno #Shield #Template #project-template #project

This project is a motherboard for the ESP32-CAM module, which enables easy and flexible WiFi camera applications. The motherboard provides power supply, programming interface, and GPIO expansion for the ESP32-CAM. It also supports external sensors for more functionality. #motherboard #WiFi #MCU #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

The LoSS - ST LoRa Data Logger project is designed to collect and log data using LoRa connectivity. It includes interfaces for JTAG and UART communication. Key components include multiple capacitors, resistors, a crystal oscillator, and an NXP MCU. The device interacts with various sensors and transmits data periodically using LoRa technology. Interface elements include buttons and a display for user interaction.

Control board for autonomous or radio-controlled robots. It has inputs to connect distance sensors and encoders for autonomous mode. It can be radio controlled by the ESP32 bluetooth or by connecting a Flysky RC controller receiver to the IBUS port. It also has 3 push buttons and you can connect some kind of display by I2C to visualize and select configuration modes. Forked from original project: https://www.flux.ai/jr98/esp32-robot-controller

Spot the mistake! Learn how to use AI to conduct a design review on an ESP32-based control board. This project is ideal for autonomous or radio-controller robots featuring inputs for sensors, encoders, and a Flysky RC receiver, plus an I2C display for configuration.

Product Type: Wearable AI pendant Primary Function: Records audio, generates transcripts, and organizes information about daily interactions User Interaction: Input: Activation button Output: RGB LED ring, Bluetooth link to phone Key Features: Audio Recording: Activated by button press Transcription: Converts audio to text Sentiment Analysis: Embedded AI evaluates sentiment Information Management: Filters essential information and action items Technical Specifications Form Factor: Wearable pendant Display: RGB LED ring around the edge Sensors: 2 Microphones 1 Button Connectivity: Bluetooth for phone linkage Wi-Fi USB-C for charging Wireless Protocol: Wi-Fi, Bluetooth Battery Type: LiPo 2000 mAh Battery Life: 6 hours of continuous use Charging Method: USB-C Operating Voltage: 3.3V Operating Conditions: Temperature Range: -10°C to 70°C Humidity: 10 to 90% Software: Python for AI and processing Compliance: RoHS, FCC, CE Reliability: 20,000 hrs Life Cycle Expectancy: 10 years AI Capabilities Speech to Text Recognition: Converts audio input to written text Embedded AI Sentiment Analysis: Evaluates the mood or sentiment expressed in the text Essential Information Filtering: Identifies and segregates crucial data and actionable items Power Consumption and Efficiency Power consumption must align with battery capacity to ensure 6 hours of continuous operational use.

Weather Station controlled by STM32F031F6P6 MCU. 2x humidity and temperature sensors. USB powered

Weather Station controlled by STM32F031F6P6 MCU. 2x humidity and temperature sensors. USB powered

Weather Station controlled by STM32F031F6P6 MCU. 2x humidity and temperature sensors. USB powered

Spot the mistake! Learn how to use AI to conduct a design review on an ESP32-based control board. This project is ideal for autonomous or radio-controller robots featuring inputs for sensors, encoders, and a Flysky RC receiver, plus an I2C display for configuration.

Spot the mistake! Learn how to use AI to conduct a design review on an ESP32-based control board. This project is ideal for autonomous or radio-controller robots featuring inputs for sensors, encoders, and a Flysky RC receiver, plus an I2C display for configuration.

AHT20+BMP280 Temperature Humidity Pressure Module High-Precision Digital Sensors #I2C #AHT20 #BMP280 #part #digital

AHT20+BMP280 Temperature Humidity Pressure Module High-Precision Digital Sensors #I2C #AHT20 #BMP280 #part #digital

Spot the mistake! Learn how to use AI to conduct a design review on an ESP32-based control board. This project is ideal for autonomous or radio-controller robots featuring inputs for sensors, encoders, and a Flysky RC receiver, plus an I2C display for configuration.

Spot the mistake! Learn how to use AI to conduct a design review on an ESP32-based control board. This project is ideal for autonomous or radio-controller robots featuring inputs for sensors, encoders, and a Flysky RC receiver, plus an I2C display for configuration.

Spot the mistake! Learn how to use AI to conduct a design review on an ESP32-based control board. This project is ideal for autonomous or radio-controller robots featuring inputs for sensors, encoders, and a Flysky RC receiver, plus an I2C display for configuration.

Spot the mistake! Learn how to use AI to conduct a design review on an ESP32-based control board. This project is ideal for autonomous or radio-controller robots featuring inputs for sensors, encoders, and a Flysky RC receiver, plus an I2C display for configuration.

ESP32-Lora Sensor Board Used to take sensor data and send them via LoRa to other devices or to the cloud, ESP32 can also be used to perform some on-site automation.

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

This project is a LoRa-based leak sensor reference design. It incorporates an STM32 MCU and a RFM95W LoRa module #LoRa #STM32 #ARM #referenceDesign #simple-embedded #raspberrypi #template #reference-design

Capture the peak value of a waveform. #project #LTC6268 #Detector #waveform

This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

This is a LoRa-based door and window sensor incorporating a microcontroller unit (MCU). It features a reed sensor, LED indicators, a AAA non-rechargeable battery, and a booster IC for constant voltage. The MCU is linked to peripherals through nets, ensuring optimal performance #LoRa #MCU #ReferenceDesign #project #referenceDesign #simple-embedded #seeed #seeed-studio #template #reference-design

This is a motion detector circuit using an ESP32 microcontroller and PIR sensor. It features USB-C connectivity, RGB LED indication, push buttons and is powered by a 3.3V supply. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #PIR #esp32 #reference-design

This project is a LoRa-based leak sensor reference design. It incorporates an STM32 MCU and a RFM95W LoRa module #LoRa #STM32 #ARM #referenceDesign #simple-embedded #raspberrypi #template #reference-design

This project is a LoRa-based leak sensor reference design. It incorporates an STM32 MCU and a RFM95W LoRa module #LoRa #STM32 #ARM #referenceDesign #simple-embedded #raspberrypi #template #reference-design

EMF Detector STM32 Edition

Compact ACS712 current sensor module, capable of measuring up to 20A of AC or DC current. The layout includes a 2-pin connector for the input current, a terminal for the output voltage, and two capacitors for noise reduction. #template #project #sensor #current_sensor #ACS712

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

This project is a LoRa-based leak sensor reference design. It incorporates an STM32 MCU and a RFM95W LoRa module #LoRa #STM32 #ARM #referenceDesign #simple-embedded #raspberrypi #template #reference-design

Schmeatic of an wireless sensor node capable of acquiring wind data within a mean fitting deviation of ±0.063398 m/s, store them and present them wirelessly to an IEEE 802.15.4 protocol sink node

A sensor to sense the presence of different gasses in the air we breathe.

This project is a LoRa-based leak sensor reference design. It incorporates an STM32 MCU and a RFM95W LoRa module #LoRa #STM32 #ARM #referenceDesign #simple-embedded #raspberrypi #template #reference-design

This project is a BLE door and window sensor design that uses a U-blox BMD-330-A-R for BLE communication, a reed switch as a sensor, a multi-color LED for status display, and is powered by VBAT. There's also a programming interface and reset switch included. #WiFi #BLE #MCU #ReferenceDesign #project #referenceDesign #simple-embedded #ublox #template #reference-design

Capacitive Moisture Sensor (Corrosion Resistant) is a soil moisture sensor based on capacitance changes