LSM6DSO32X is a low-power 6-axis IMU (Inertial Measurement Unit) from STMicroelectronics that integrates a 3-axis accelerometer with up to ±32g full-scale range and a 3-axis gyroscope with selectable ranges up to ±2000 dps. The device features an embedded Machine Learning Core (MLC), Finite State Machine (FSM), pedometer, step detector, tilt detection, motion classification, and smart sensor processing functions, enabling advanced edge AI and sensor fusion applications without continuous MCU intervention. Communication is supported through SPI, I²C, and MIPI I3C interfaces. Designed for wearable devices, smart watches, asset tracking, IoT products, motion analysis, gesture recognition, navigation systems, and low-power embedded applications. Search Keywords: LSM6DSO32X, ST LSM6DSO32X, 6-axis IMU, inertial measurement unit, accelerometer gyroscope combo, 3-axis accelerometer, 3-axis gyroscope, machine learning sensor, embedded AI sensor, motion sensor, MEMS sensor, pedometer sensor, step counter sensor, tilt detection sensor, gesture recognition sensor, SPI IMU, I2C IMU, I3C sensor, wearable sensor, navigation sensor, sensor fusion IMU, smart motion sensor, asset tracking sensor Hashtags: #LSM6DSO32X #STMicroelectronics #IMU #MEMS #Accelerometer #Gyroscope #MotionSensor #MachineLearningCore #EmbeddedAI #SensorFusion #Pedometer #Wearables #IoT #AssetTracking #Navigation #GestureRecognition #I2C #SPI #I3C #ElectronicComponents

MOSFET N-CH 20V 3.6A SOT-23 The IRLML2502 is a small-signal N-channel enhancement mode power MOSFET designed for low-voltage, high-efficiency switching applications. It is commonly used as a load switch or power control transistor in compact electronic systems such as battery-powered devices, LED drivers, and DC-DC converters. It features a low on-resistance (RDS(on)), which allows it to switch higher currents with minimal power loss and heat generation. The device is optimized for logic-level gate drive, meaning it can be driven directly from microcontrollers (like 3.3 V or 5 V systems). It is packaged in a compact SOT-23 (Micro3) surface-mount package, making it suitable for space-constrained PCB designs. Key Features N-channel enhancement mode MOSFET Drain-source voltage (VDS) up to 20 V Continuous drain current up to ~4.2 A (at 25°C) Very low RDS(on) ≈ 45 mΩ @ VGS = 4.5 V Logic-level gate drive capability (works with 2.5–4.5 V signals) Fast switching performance Compact SOT-23 (Micro3) surface-mount package Low gate charge for efficient switching Suitable for battery-powered and low-voltage applications RoHS compliant, lead-free design #IRLML2502 #MOSFET #NChannelMOSFET #PowerElectronics #SOT23 #LogicLevelMOSFET #PowerSwitch #ElectronicComponents #EmbeddedSystems #PCBDesign

8 Position FFC, FPC Connector Contacts, Bottom 0.039" (1.00mm) Surface Mount, Right Angle The Molex Easy-On connector is a compact surface-mount FPC/FFC interconnect solution designed for reliable board-to-cable connections in space-constrained electronic systems. Featuring a bottom-contact configuration with a flip-lock actuator, it provides secure retention of flexible printed circuits while supporting repeated insertion and removal cycles. Its low-profile construction and robust locking mechanism make it suitable for consumer electronics, industrial controls, embedded systems, displays, and portable devices where dependable signal transmission and compact form factors are required. Engineering Specifications Manufacturer: Molex Series: Easy-On FD19 Part Number: 2005280080 Connector Type: FFC/FPC Connector Contact Configuration: Bottom Contact Actuator Type: Flip-Lock ZIF Mounting Style: Surface Mount Orientation: Right Angle Circuit Count: Eight Positions Pitch: One Millimeter Cable Type: Flexible Flat Cable / Flexible Printed Circuit Contact Material: Copper Alloy Contact Finish: Gold over Nickel Housing Material: High-Temperature Thermoplastic Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Halogen Free: Yes Application Areas: LCD Interfaces, Touch Panels, Embedded Electronics, Industrial Equipment, Portable Devices, Consumer Electronics #Molex #EasyOn #FD19 #FFCConnector #FPCConnector #FlipLock #BottomContact #ZIFConnector #SMTConnector #ElectronicComponents #Interconnect #PCBDesign #EmbeddedSystems #DisplayInterface #IndustrialElectronics

JDY-23 is an ultra-low-power Bluetooth 5.0 BLE transparent transmission module operating in the 2.4GHz ISM band using GFSK modulation. The module supports wireless UART-to-BLE communication, enabling seamless data exchange between a microcontroller and smartphones, tablets, or other BLE-enabled devices. It provides up to +4dBm transmit power and a communication range of up to 60 meters under optimal conditions. The module supports configurable AT commands for changing device name, baud rate, advertising parameters, and communication settings. JDY-23 is designed for low-power IoT devices, wireless sensors, smart home equipment, industrial monitoring, wearable electronics, and battery-powered embedded applications requiring simple BLE connectivity. Search Keywords: JDY-23, JDY23, Bluetooth 5.0 module, BLE module, Bluetooth Low Energy module, UART BLE module, transparent transmission module, serial Bluetooth module, wireless UART bridge, 2.4GHz BLE transceiver, AT command BLE module, IoT Bluetooth module, low power Bluetooth module, embedded BLE module, MCU Bluetooth interface, Bluetooth serial communication, smart home BLE module, sensor BLE module, battery powered BLE module Hashtags: #JDY23 #Bluetooth5 #BLE #BluetoothLowEnergy #UARTBLE #BluetoothModule #WirelessCommunication #IoT #EmbeddedSystems #Microcontroller #SmartHome #WearableElectronics #SensorNode #LowPowerDesign #WirelessUART #ATCommands #2_4GHz #Electronics #PCBDesign #ElectronicComponents

Audio D/A Converter ICs SABRE 8 Channel Smart DAC with Line Drivers, ASP2, 7mmx7mm, 48-QFN The ES9082Q is a high-performance stereo digital-to-analog converter (DAC) developed by ESS Technology for premium audio applications requiring exceptional sound quality, low power consumption, and compact integration. It utilizes the patented HyperStream® architecture and Time Domain Jitter Eliminator technology to deliver highly accurate audio reproduction with ultra-low distortion and noise characteristics. The device supports high-resolution PCM and DSD audio formats, making it suitable for portable audio devices, USB DACs, digital media players, automotive infotainment systems, wireless audio products, and professional audio equipment. The ES9082Q integrates advanced digital filtering, low-jitter clock management, and flexible audio interface support while maintaining efficient power operation for battery-powered applications. Designed for compact embedded audio systems, the ES9082Q provides excellent dynamic range and signal fidelity while minimizing external component requirements. Its architecture enables high-quality playback performance across a wide range of consumer and industrial audio applications. Electrical Characteristics Supply voltage supports low-voltage digital and analog power domains optimized for portable and embedded applications. The device operates with low power consumption while maintaining high audio performance. Integrated power management supports efficient system-level implementation. Audio Performance The converter supports high-resolution stereo audio output with advanced oversampling and noise shaping technology. It delivers ultra-low total harmonic distortion plus noise performance and high dynamic range suitable for high-fidelity audio playback systems. PCM audio data rates support standard and high-resolution formats up to 32-bit depth with sampling frequencies extending to high-definition audio ranges. Native DSD playback capability is also supported for audiophile-grade applications. Digital Audio Interface The ES9082Q supports industry-standard serial audio interfaces including I²S, left-justified, and related digital audio communication protocols. Flexible master and slave clocking configurations enable compatibility with a wide variety of host processors and audio controllers. Integrated jitter suppression circuitry improves clock stability and minimizes timing-induced audio artifacts. Integrated Features The device incorporates digital interpolation filters, volume control functions, soft mute capability, and programmable audio processing features. Internal PLL and clock management circuitry reduce external timing component requirements. Built-in low-noise analog output stages simplify audio signal chain design and reduce overall PCB footprint. Package Information The ES9082Q is provided in a compact surface-mount package optimized for space-constrained audio products. The package supports automated assembly and high-density PCB layouts commonly used in portable and embedded systems. Typical Applications Applications include portable audio players, USB DAC modules, wireless speakers, automotive audio systems, headphones, digital amplifiers, embedded multimedia devices, smart home audio equipment, and professional audio playback systems. #commonpartslibrary #integratedcircuit #audioic #dac #stereodac #esstechnology #es9082q #highresolutionaudio #audiophile #digitalaudio #analogaudio #i2s #dsd #pcm #embeddedaudio #consumerelectronics #portableaudio #usbdac #hifi #signalprocessing #lownoise #lowdistortion #electronicsdesign #pcbdesign #hardwareengineering #electroniccomponents #semiconductor #mixedsignal #audioelectronics #soundquality

USB 3.1 QFN-64 Interface Controllers RoHS 4.75V~5.25V,0~+70,Channels 2 GL3510 is a low-power USB 3.1 Gen1 hub controller from Genesys Logic available in 2-port and 4-port configurations. It integrates USB 3.1 Gen1 SuperSpeed PHY and USB 2.0 High-Speed PHY, providing backward compatibility with USB 2.0 and USB 1.1 devices. The controller includes integrated 5V-to-3.3V and 5V-to-1.2V regulators, reducing external component count and PCB complexity. GL3510 supports USB Battery Charging Specification BC1.2, including Charging Downstream Port (CDP) and Dedicated Charging Port (DCP) modes, allowing fast charging of smartphones, tablets, and portable devices even during system sleep or power-off states. Suitable for USB hubs, docking stations, industrial computers, embedded systems, monitors, and consumer electronics. Search Keywords: GL3510, GL3510-52, Genesys Logic GL3510, USB 3.1 hub controller, USB hub IC, USB 3.1 Gen1 hub, SuperSpeed USB hub controller, USB 2.0 hub controller, 4-port USB hub, 2-port USB hub, USB BC1.2 controller, charging downstream port controller, dedicated charging port controller, USB docking station controller, embedded USB hub, USB expansion controller, USB host interface, QFN64 USB hub, QFN48 USB hub GL3510 Hashtags: #GL3510 #GL351052 #GenesysLogic #USBHub #USB31 #USB3Gen1 #SuperSpeedUSB #USBController #USBHubController #BC12 #FastCharging #DockingStation #EmbeddedSystems #IndustrialElectronics #ConsumerElectronics #PCBDesign #ElectronicComponents #USB20 #QFN64 #QFN48

SDRAM - Mobile LPDDR4 Memory IC 48Gbit 2.133 GHz MT53E1536M32D4DT-046 WT:A is a high-density 48Gb (6GB) LPDDR4/LPDDR4X SDRAM memory device from Micron Technology. It is designed for high-performance, low-power applications requiring fast memory bandwidth and efficient power management. The device features a 32-bit data bus, supports data rates up to 4266 MT/s, and is packaged in a compact 200-ball FBGA, making it suitable for embedded computing, industrial systems, networking equipment, AI edge devices, automotive electronics, and mobile platforms. Key Features 48Gb (6GB) LPDDR4/LPDDR4X SDRAM Organized as 1.5G × 32 bits Data transfer rates up to 4266 MT/s Maximum clock frequency of 2133 MHz Low-power operation with 1.1V core supply 32-bit memory interface 200-ball FBGA package JEDEC LPDDR4-compliant architecture Per-bank refresh support Temperature-compensated refresh Self-refresh and deep power-down modes Partial-array self-refresh capability High bandwidth with reduced power consumption Optimized for compact embedded designs Operating temperature range: –30°C to +85°C Typical Applications Embedded Linux computers Single-board computers (SBCs) AI and edge computing platforms Industrial automation systems Networking and telecommunications equipment Automotive infotainment and control systems Tablets and mobile devices FPGA and SoC-based designs #commonpartslibrary #integratedcircuit #memory #dram #sdram #lpddr4 #lpddr4x #mobiledram #micron #embeddedsystems #embeddedcomputing #industrialelectronics #automotiveelectronics #edgecomputing #artificialintelligence #networking #telecommunications #highspeedmemory #lowpowerdesign #computerhardware #electroniccomponents #semiconductor #datasheet #fbga #memorychip #electronicsdesign #pcbdesign #hardwareengineering #electronicengineering #systemonchip #fpga #iot #internetofthings #computermemory #digitalelectronics #surfaceMount #smt #bga #storage #highperformancecomputing #hpc #mobiledevices #industrialautomation #electronicdesign #componentlibrary #fluxlibrary #parametricpart #eda #schematic #pcb #electronicdesignautomation #chipdesign #embeddedhardware #memorymodule #lowpowerelectronics #highbandwidthmemory #electronics #hardwaredevelopment #engineering #electricalengineering

Micro-Fit 3.0 Vertical Header, 3.00mm Pitch, Dual Row, 4 Circuits, with PCB Press-fit Metal Retention Clip Connector Header Through Hole 4 position 0.118" (3.00mm) The Molex 0430450426 is a 4-position vertical PCB header belonging to the Micro-Fit 3.0 series, designed for compact and reliable power and signal wire-to-board connections. It features a 3.00 mm pitch, through-hole mounting, and a shrouded design for secure mating with compatible receptacles. This connector is commonly used in applications requiring medium-current power delivery in a compact footprint, such as industrial equipment, automotive electronics, consumer devices, and telecommunications systems. It supports a robust locking mechanism to prevent accidental disengagement and ensures stable electrical performance in vibration-prone environments. Key Features 4-position vertical PCB header 3.00 mm pitch (Micro-Fit 3.0 family) Through-hole solder termination Shrouded, polarized housing for correct mating Locking ramp / retention feature for secure connection Rated for medium-power applications (varies by wire gauge, up to industrial-level current use cases) Operating temperature range: -40°C to +105°C High-voltage capability (up to ~600 V rating depending on configuration) Suitable for automotive, industrial, medical, and telecom systems Typical Applications Industrial control systems Automotive electronics modules Power supply interconnects Communication equipment Embedded systems and PCB power distribution #CommonPartsLibrary #Connector #Molex #MicroFit3 #0430450426 #PCBHeader #WireToBoardConnector #PowerConnector #3mmPitch #ElectronicComponents #ConnectorHeader #AutomotiveElectronics #IndustrialConnector

Isolated Module DC DC Converter 2 Output 5V -5V 300mA 4.5V - 5.5V Input # Engineering Specification ## Product Name IR0505S ## General Description IR0505S is an isolated power conversion module designed to provide reliable DC-to-DC power conversion for electronic and embedded systems requiring galvanic isolation between input and output circuits. The device is intended for use in industrial control equipment, communication systems, instrumentation, automation platforms, and other electronic applications where stable power delivery and electrical isolation are essential. The module incorporates integrated switching and isolation technologies to support efficient power transfer while reducing system complexity and board-level design effort. Its compact form factor allows straightforward integration into printed circuit board assemblies and power distribution architectures. The design emphasizes operational reliability, electrical safety, electromagnetic compatibility, and long-term performance in demanding environments. ## Functional Requirements ### Power Conversion The module shall convert input DC power to an isolated DC output suitable for downstream electronic circuits and subsystems. ### Electrical Isolation The module shall provide galvanic isolation between input and output domains to reduce the propagation of electrical noise, ground loops, and fault conditions. ### Operational Stability The module shall maintain stable output characteristics during normal operating conditions and expected load variations. ### System Integration The module shall support integration into embedded, industrial, and communication systems through standard electrical interfaces and assembly practices. ## Electrical Requirements ### Input Characteristics The device shall accept DC input power within the specified operating range and maintain reliable operation throughout normal conditions. ### Output Characteristics The device shall provide regulated isolated output power suitable for electronic loads requiring stable voltage and current delivery. ### Protection Features The design shall incorporate protective characteristics to support safe operation during abnormal electrical conditions and transient events. ### Noise Performance The module shall minimize conducted and radiated electrical noise to support compatibility with sensitive electronic circuits. ## Mechanical Requirements ### Package Construction The module shall utilize a compact package suitable for direct PCB mounting and automated assembly processes. ### Structural Integrity The assembly shall withstand normal handling, installation, transportation, and operational stresses without degradation of performance. ### Maintainability The device shall support replacement and servicing through standard electronic maintenance procedures. ## Environmental Requirements ### Operating Environment The module shall perform reliably within the environmental conditions specified for industrial and commercial electronic applications. ### Storage Conditions The product shall maintain functional integrity during storage and transportation when handled according to recommended practices. ## Quality Requirements ### Reliability The module shall be designed for dependable long-term operation with consistent electrical performance throughout its intended service life. ### Verification Electrical, mechanical, and environmental characteristics shall be validated through applicable inspection, testing, and qualification procedures. ### Compliance The product shall conform to applicable safety, quality, and manufacturing standards relevant to isolated power conversion devices. ## Documentation Requirements Supporting documentation shall include product identification, electrical characteristics, application guidance, installation recommendations, safety information, and maintenance considerations. ## Classification Tags #IR0505S #DCDCConverter #IsolatedPowerSupply #PowerModule #CommonPartsLibrary #IntegratedCircuit #PowerElectronics #ElectronicComponents #ElectricalEngineering #EmbeddedSystems #IndustrialAutomation #PowerManagement #CircuitDesign #PCBDesign #SystemIntegration #EngineeringSpecification #TechnicalDocumentation #ReliabilityEngineering #ElectronicHardware #ComponentLibrary

MAX3188EEUT+T SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL LCSC Part Number: C2671283 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)/MAXIM(美信) MAX31889 MAX31889 is a high-accuracy digital temperature sensor from Analog Devices featuring an I²C interface and industry-leading measurement precision of ±0.25°C from -20°C to +105°C and ±0.65°C from -40°C to +125°C. Operating from a 1.7V to 3.6V supply, the device offers low power consumption with only 68µA during measurements and 0.55µA in standby mode, making it ideal for battery-powered systems. The sensor includes programmable high and low temperature alarms, a 32-word FIFO buffer for temperature data logging, configurable GPIO pins for conversion triggering and interrupt generation, and unique ROM identification for traceability. Packaged in a compact 2mm × 2mm 6-pin µDFN package, the MAX31889 is suitable for precision temperature monitoring, industrial systems, IoT devices, medical equipment, environmental sensing, and RTD replacement applications. Search Keywords: MAX31889, Analog Devices MAX31889, digital temperature sensor, I2C temperature sensor, precision temperature sensor, high accuracy temperature sensor, low power temperature sensor, industrial temperature sensor, IoT temperature sensor, environmental monitoring sensor, battery powered sensor, programmable temperature alarm, FIFO temperature sensor, RTD replacement, temperature monitoring IC, ±0.25°C temperature sensor, µDFN temperature sensor, embedded temperature sensor, thermal monitoring Hashtags: #MAX31889 #AnalogDevices #TemperatureSensor #DigitalTemperatureSensor #I2C #PrecisionSensor #ThermalMonitoring #EnvironmentalMonitoring #IndustrialElectronics #IoT #EmbeddedSystems #LowPowerDesign #BatteryPowered #Sensor #Measurement #DataLogging #Electronics #ElectronicComponents #PCBDesign #ADI

LED Driver IC 1 Output DC DC Controller SEPIC, Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 8-SO-EP # AL8866QSP-13 Engineering Specifications **General Description** The AL8866QSP-13 is an automotive-qualified, multi-topology DC-switching LED controller manufactured by Diodes Incorporated. It is designed to control an external power MOSFET for high-power automotive LED lighting systems. The device supports buck, boost, buck-boost and single-ended primary-inductance converter configurations. Its wide input-voltage range makes it suitable for automotive power systems and various high-voltage LED applications. The controller uses fixed-frequency peak current-mode regulation with spread-spectrum frequency modulation to reduce electromagnetic interference. It supports both analog and pulse-width-modulation dimming through the DIM input. An integrated programmable soft-start function gradually increases the inductor and switching currents during startup to reduce output-voltage and current stress. The open-drain fault output provides system-level fault reporting for abnormal operating conditions. **Engineering Specifications** **Manufacturer:** Diodes Incorporated **Manufacturer Part Number:** AL8866QSP-13 **Component Type:** Automotive LED driver controller **Converter Topologies:** Buck, boost, buck-boost and SEPIC **Control Architecture:** Fixed-frequency peak current-mode control **External Switching Device:** External power MOSFET **Minimum Input Voltage:** Four point seven volts **Maximum Input Voltage:** Eighty-five volts **Maximum Output Voltage:** Eighty-five volts **Switching Frequency:** Four hundred kilohertz **Frequency Modulation:** Spread-spectrum modulation for reduced electromagnetic interference **LED Current Control:** External current-sense resistor and external MOSFET configuration **Feedback Voltage:** Two hundred millivolts **Typical Quiescent Current:** One point eight milliamperes **Typical Efficiency:** Up to approximately ninety-three percent, depending on the application circuit and external components **Dimming Methods:** Analog dimming and pulse-width-modulation dimming **Analog Dimming Range:** One percent to one hundred percent **Analog Dimming Dynamic Range:** Greater than one hundred to one **Pulse-Width-Modulation Dimming Ratio:** One hundred to one at a two-hundred-hertz dimming frequency **Pulse-Width-Modulation Frequency Range:** Approximately one hundred hertz to one kilohertz **Full-Brightness Current Accuracy:** Approximately plus or minus three percent **Low-Level Dimming Current Accuracy:** Approximately plus or minus twelve percent at twenty-percent dimming **Soft-Start Function:** Externally programmable **Fault Output:** Active-low open-drain fault indicator **Protection Features:** Output overvoltage protection, LED open-circuit protection, output undervoltage protection, LED short-circuit protection, cycle-by-cycle overcurrent limitation, current-sense resistor short-circuit protection, inductor and diode short-circuit detection, diode open-circuit protection and thermal shutdown **Automotive Qualification:** AEC-Q100 Grade One qualified **Automotive Documentation:** PPAP capable **Manufacturing Standard:** Manufactured in IATF-certified automotive facilities **Operating Temperature Range:** Minus forty degrees Celsius to positive one hundred twenty-five degrees Celsius **Package Type:** Thermally enhanced SO-8 exposed-pad package **Pin Count:** Eight leads with exposed thermal ground pad **Mounting Style:** Surface mount **Packing Method:** Thirteen-inch tape and reel **Standard Packing Quantity:** Two thousand five hundred components per reel **Moisture Sensitivity:** Level One **Terminal Finish:** Matte-tin-plated leads **Environmental Compliance:** Lead-free, RoHS compliant, halogen-free and antimony-free **Typical Applications** Automotive high-beam and low-beam lighting Automotive daytime running lights Automotive fog lights Automotive turn-signal lights Automotive position lights Automotive brake and stop lights High-power exterior LED lighting Multi-topology automotive LED driver modules #AL8866QSP13 #AL8866Q #DiodesIncorporated #LEDDriver #AutomotiveLED #AutomotiveElectronics #BuckConverter #BoostConverter #BuckBoostConverter #SEPICConverter #PowerElectronics #LEDLighting #ElectronicComponents #EngineeringSpecifications

40 Position FFC, FPC Connector Receptacle 0.071" (1.80mm) Surface Mount, Right Angle The KF1R-BBAH1-EA940 is a FlexFast™ board-to-board receptacle connector designed for high-density PCB interconnection applications. It provides a reliable electrical and mechanical interface between printed circuit boards in compact electronic systems. The connector features a right-angle surface-mount configuration, dual-row contact arrangement, and gold-plated copper-alloy contacts to ensure excellent signal integrity, low contact resistance, and long-term durability. Its thermoplastic housing offers mechanical strength and high-temperature resistance, making it suitable for communication, industrial, consumer, and embedded electronic equipment. Manufacturer Amphenol Communications Solutions Part Number KF1R-BBAH1-EA940 Product Series FlexFast™ Connector Type Board-to-Board Receptacle Connector Number of Positions 40 Contacts Contact Arrangement Dual Row Mounting Style Surface Mount Technology (SMT) Orientation Right Angle Contact Pitch 1.8 mm Termination Type Solder Termination Contact Material Copper Alloy Contact Plating Gold Housing Material Thermoplastic Housing Color Black Current Rating 1 A per Contact Operating Temperature Range -40°C to +125°C Flammability Rating UL94 V-0 Mating Durability 100 Mating Cycles Compliance High-density board-to-board interconnection solution Compact right-angle SMT design Dual-row contact configuration Gold-plated contacts for enhanced reliability Low contact resistance and stable electrical performance Durable thermoplastic housing Wide operating temperature range Integrated alignment features for reliable mating Suitable for signal and power transmission Designed for industrial, communication, and embedded electronic applications #Connector #BoardToBoard #FlexFast #Amphenol #SMT #RightAngle #Receptacle #PCB #ElectronicComponents #Interconnect #KF1R_BBAH1_EA940

FLASH - NOR Memory IC 128Mb (16M x 8) SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC 128M-bit Serial Flash Memory with uniform 4KB sectors and Dual/Quad SPI Winbond W25Q128JV is a 128-Mbit (16 MB) serial NOR Flash memory device designed for code and data storage in embedded systems. It supports standard SPI, Dual SPI, Quad SPI (QSPI), and Dual/Quad Peripheral Interface (DPI/QPI) modes, enabling high-speed data transfer rates up to 133 MHz clock operation and up to 532 MB/s equivalent throughput in Quad I/O DTR mode. The device supports Execute-In-Place (XIP), allowing processors and microcontrollers to run code directly from external flash memory without copying it to RAM. Features include 4 KB sector erase, 32 KB and 64 KB block erase, page programming, hardware/software write protection, security registers, JEDEC identification, SFDP support, suspend/resume operations, and low-power standby modes. Suitable for microcontrollers, FPGA configuration storage, IoT devices, industrial controllers, networking equipment, consumer electronics, and embedded systems requiring reliable non-volatile memory. Search Keywords: W25Q128JV, Winbond flash memory, SPI NOR Flash, QSPI Flash, Quad SPI memory, Serial Flash memory, 128Mbit Flash, 16MB Flash memory, Execute In Place XIP, external MCU flash, ESP32 flash memory, FPGA configuration memory, NOR flash storage, W25Q128, Dual SPI Flash, Quad I/O Flash, embedded nonvolatile memory, serial flash IC Hashtags: #W25Q128JV #Winbond #NORFlash #SPIMemory #QSPI #SerialFlash #FlashMemory #EmbeddedSystems #Microcontroller #ESP32 #FPGA #NonVolatileMemory #XIP #IoT #ElectronicsDesign #MemoryIC #FirmwareStorage #QuadSPI #EmbeddedHardware #ElectronicComponents

2.2 kOhms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film he CFR-25JB-52-2K2 is a carbon film through-hole resistor manufactured by Yageo. It is designed for general-purpose current limiting, voltage division, biasing, filtering, and signal conditioning applications in electronic circuits. The resistor features a durable carbon film construction, axial lead configuration, and flame-resistant coating, providing stable electrical performance and reliable operation across a wide temperature range. It is suitable for consumer, industrial, automotive, and embedded electronic systems. Manufacturer Yageo Part Number CFR-25JB-52-2K2 Product Series CFR Component Type Carbon Film Resistor Resistance Value 2.2 kΩ Resistance Tolerance ±5% Rated Power 0.25 W (1/4 W) Technology Carbon Film Mounting Type Through Hole Package Style Axial Leaded Number of Terminals 2 Operating Temperature Range -55°C to +155°C Temperature Coefficient -500 ppm/°C to +350 ppm/°C Working Voltage 250 V Overload Voltage 500 V Body Dimensions 2.4 mm Diameter × 6.3 mm Length Compliance RoHS Compliant Qualification AEC-Q200 Automotive Qualified Key Features Carbon film resistor technology for stable performance 2.2 kΩ resistance value suitable for general-purpose applications 1/4 W power rating ±5% resistance tolerance Axial through-hole package for easy assembly and prototyping Wide operating temperature range Automotive AEC-Q200 qualified Low-cost and reliable passive component solution Suitable for voltage divider, pull-up, pull-down, current-limiting, and signal-conditioning circuits RoHS compliant construction for environmentally conscious designs High working voltage capability for low-power electronic applications #Resistor #CarbonFilm #Yageo #ThroughHole #AxialResistor #PassiveComponent #AECQ200 #AutomotiveElectronics #CFRSeries #CFR25JB522K2 #ElectronicComponents #PCBDesign #EmbeddedSystems

Connector Header Surface Mount, Right Angle 8 position 0.039" (1.00mm) The SM08B-SRSS-TB is a compact, right-angle, surface-mount terminal block connector designed for secure wire-to-board connections in a wide range of electronic applications. It features a spring-clamp mechanism that ensures reliable electrical contact while allowing easy insertion and removal of solid or stranded wires without the need for screws. The terminal block is constructed from high-temperature, flame-retardant thermoplastic, providing robust mechanical stability and durability in harsh environments. Its low-profile design, consistent contact pressure, and compact footprint make it ideal for industrial control panels, automation systems, consumer electronics, power supplies, and signal distribution boards where secure and maintenance-free wire connections are required. Engineering Specifications Manufacturer: Sullins Connector Solutions / TE Connectivity Part Number: SM08B-SRSS-TB Connector Type: Terminal Block, Right Angle Mounting Style: Surface Mount Actuation Method: Spring-Clamp Wire Size Accommodation: Small Gauge Solid and Stranded Wires Contact Material: Tin-Plated Copper Alloy Housing Material: High-Temperature Thermoplastic, Flame Retardant Operating Voltage: Standard Low-Voltage Electronics Current Rating: Suitable for Signal and Low-Power Connections Pitch: Standard 5 mm / 0.2 inch (SM Series Typical) Poles: 8 Positions Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Industrial Controls, Automation Equipment, Signal Distribution, PCB Wiring, Consumer Electronics, Power Supplies, Embedded Systems Key Features Reliable spring-clamp wire retention Maintenance-free, no screws required Compact, low-profile design Durable thermoplastic housing Easy PCB mounting and soldering Suitable for solid and stranded wires #SM08B #SM08B_SRSS_TB #SpringClampConnector #TerminalBlock #SurfaceMount #RightAngleConnector #WireToBoard #PCBConnector #IndustrialElectronics #Automation #EmbeddedSystems #ElectronicComponents #SignalDistribution #LowPowerConnector #CompactConnector

The 24F 5A250V is a panel-mount cartridge fuse holder designed to securely accommodate and electrically connect cartridge fuses in power distribution and protection circuits. It provides a reliable interface between the fuse element and the electrical system, enabling easy fuse replacement while maintaining electrical safety and mechanical stability. Commonly used in industrial equipment, consumer electronics, power supplies, appliances, instrumentation, and control systems, the fuse holder supports circuit protection against overload and fault conditions while ensuring convenient maintenance and serviceability. Engineering Specification Device Type Panel-Mount Cartridge Fuse Holder Fuse Compatibility Cartridge Fuse Installation and Retention Current Rating Suitable for Low-Voltage Power Protection Applications Voltage Rating Compatible with AC Power Distribution Circuits Mounting Style Panel Mount Connection Method Solder Terminal or Wire Connection Interface Contact Material Conductive Metal Contacts with Corrosion Resistance Housing Material Insulating High-Temperature Polymer Construction Mechanical Characteristics Secure Fuse Retention Easy Fuse Replacement Stable Mechanical Assembly Durable Construction Safety Characteristics Electrical Isolation Support Reliable Contact Performance Overcurrent Protection Interface Safe Fuse Accessibility Environmental Characteristics Long Service Life Resistance to Mechanical Wear Suitable for Commercial and Industrial Environments Applications Power Supplies Industrial Control Equipment Consumer Electronics Electrical Appliances Instrumentation Systems Battery Chargers Test Equipment Automation Systems Distribution Panels Embedded Electronic Devices Features Compact Panel-Mount Design Reliable Electrical Contact Easy Maintenance Access High Mechanical Durability Secure Fuse Retention Mechanism Simple Installation Wide Application Compatibility RoHS Compliant Construction Component Category Fuse Holder #commonpartslibrary #passivecomponents #fuseholder #circuitprotection #overcurrentprotection #powerelectronics #powersupply #industrialelectronics #electricalsafety #panelmount #electroniccomponents #powermanagement #protectioncircuit #controlsystems #applianceelectronics

The TTP223-BA6 is a single-channel capacitive touch sensor integrated circuit designed to replace traditional mechanical push buttons with a reliable touch-sensitive interface. The device utilizes capacitive sensing technology to detect human touch through conductive and non-conductive surfaces, enabling sleek and durable user interface designs. It features low power consumption, stable operation, high sensitivity, and simple implementation, making it suitable for consumer electronics, home appliances, industrial controls, smart devices, and embedded applications requiring touch-based input functionality. Engineering Specification Device Type Capacitive Touch Sensor Controller Sensing Method Capacitive Touch Detection Channel Configuration Single Touch Input Channel Output Configuration Digital Logic Output Operating Mode Momentary Touch Mode Toggle Touch Mode Sensitivity Control External Adjustment Capability Response Characteristics Fast Touch Detection Response Noise-Resistant Operation Stable Capacitive Sensing Performance Power Characteristics Low Power Consumption Optimized for Battery-Powered Applications Low Standby Current Operation Interface Compatibility Microcontrollers Embedded Processors Digital Logic Systems Human-Machine Interface Circuits Protection Characteristics High Immunity to Environmental Interference Reliable Touch Detection Performance Package Style SOP Surface-Mount Package Mounting Type Surface Mount Technology Applications Touch Buttons Consumer Electronics Home Appliances Smart Switches Control Panels Portable Devices IoT Products Industrial User Interfaces Lighting Controls Interactive Embedded Systems Features Single-Key Capacitive Touch Interface Mechanical Button Replacement Low Power Operation High Sensitivity Detection Adjustable Touch Parameters Compact Package Design Simple Circuit Integration Stable Environmental Performance Long Operational Life RoHS Compliant Construction Manufacturer TONTEK Design Technology #commonpartslibrary #integratedcircuit #touchsensor #capacitivetouch #humanmachineinterface #embeddedsystems #consumerelectronics #industrialelectronics #iot #controlpanel #smartdevices #sensorinterface #digitalinterface #lowpower #electroniccomponents

General Purpose Relay DPDT (2 Form C) Through Hole The G5V-2-DC5 is a compact signal relay manufactured by Omron Electronic Components and designed for reliable low-power switching in telecommunications, industrial control systems, instrumentation, automation equipment, security systems, and embedded electronic applications. The relay utilizes a dual-pole double-throw contact arrangement, enabling flexible signal routing and isolation between control and load circuits. The device features a highly reliable electromagnetic switching mechanism optimized for stable operation, low contact resistance, and consistent electrical performance throughout its service life. Its compact package allows efficient PCB integration while supporting high-density circuit layouts. The relay is engineered to provide dependable switching of low-level signals and control circuits where accuracy, durability, and long-term reliability are critical design requirements. The construction incorporates high-quality contact materials and precision mechanical components to ensure excellent switching characteristics, enhanced contact stability, and resistance to environmental influences. The relay is suitable for applications requiring galvanic isolation, signal multiplexing, interface switching, and control circuit management. General Description The G5V-2-DC5 is a miniature signal relay intended for precision switching applications in electronic systems. It offers dependable electrical isolation between circuits while maintaining excellent signal integrity and operational reliability. Its compact footprint, proven switching performance, and robust construction make it a popular choice for communication equipment, industrial electronics, measurement systems, network infrastructure, security devices, and embedded control platforms. The relay is widely recognized for its reliability, ease of integration, and suitability for demanding electronic switching environments. #G5V2DC5 #Omron #SignalRelay #ElectromechanicalRelay #PCBRelay #IndustrialElectronics #EmbeddedSystems #Automation #ControlSystems #Telecommunications #ElectronicComponents #HardwareDesign #CircuitProtection #ElectricalEngineering #PCBDesign #RelayModule #ElectronicSwitching #Instrumentation #EngineeringSpecification #ElectronicsDesign

The B0505S-1WR3 is a compact isolated DC-DC power converter module designed to provide regulated power conversion while maintaining galvanic isolation between input and output circuits. The module incorporates high-frequency switching technology and transformer isolation to deliver stable power with reduced noise coupling and improved system safety. It is widely used in industrial control systems, communication equipment, instrumentation, data acquisition devices, medical electronics, and embedded applications where isolated power rails are required to eliminate ground loops and enhance signal integrity. Engineering Specification Device Type Isolated DC-DC Converter Module Power Conversion Topology Transformer-Isolated Switching Regulator Input Configuration Single DC Input Output Configuration Single Isolated DC Output Isolation Method Internal High-Frequency Transformer Isolation Regulation Characteristics Regulated Output Voltage High Conversion Efficiency Low Output Ripple and Noise Electrical Features Galvanic Isolation Between Input and Output Enhanced Noise Immunity Stable Load Regulation Reliable Power Transfer Performance Protection Characteristics Short-Circuit Resistant Design Input-to-Output Isolation Protection Thermal Reliability Enhancement Package Style Single In-Line Through-Hole Package Mounting Type Through-Hole Mounting Environmental Characteristics Industrial-Grade Reliability Long Operational Lifetime High Resistance to Electrical Interference Suitable for Harsh Operating Environments Applications Industrial Automation Equipment Data Acquisition Systems Sensor Signal Conditioning Communication Interfaces Medical Electronics Embedded Control Systems Power Supply Isolation Instrumentation Equipment Process Control Devices Microcontroller-Based Systems Features Compact Integrated Module Isolated Power Distribution High Reliability Design Low Electromagnetic Interference Simple Circuit Integration Efficient Power Conversion Stable Output Performance Wide Application Compatibility RoHS Compliant Construction Manufacturer MORNSUN #commonpartslibrary #powermodule #dcdcconverter #isolatedpower #galvanicisolation #powermanagement #powersupply #powerelectronics #industrialelectronics #instrumentation #communications #embeddedsystems #medicalelectronics #throughhole #electroniccomponents

The NX3225GD 8.000MHz STD-CRA-3 is a surface-mount quartz crystal resonator designed to provide a stable and accurate clock reference for electronic circuits. It is housed in a compact ceramic package suitable for space-constrained applications and is optimized for low power consumption and reliable frequency generation. This crystal is commonly used in microcontrollers, wireless communication modules, industrial control systems, consumer electronics, IoT devices, and embedded systems requiring precise timing and frequency control. Features Fundamental mode quartz crystal resonator Nominal frequency of 8.000 MHz Compact surface-mount ceramic package High frequency stability and accuracy Low equivalent series resistance Suitable for low-power oscillator circuits Excellent aging characteristics RoHS-compliant construction Designed for automated SMT assembly processes Reliable operation across industrial temperature environments Electrical Characteristics Crystal type: Quartz Crystal Resonator Frequency: 8.000 MHz Oscillation mode: Fundamental Load capacitance: Standard load capacitance configuration Frequency tolerance: Standard precision grade Frequency stability: Industrial-grade stability performance Equivalent series resistance optimized for MCU and RF oscillator circuits Low drive level operation High insulation resistance Mechanical Characteristics Surface-mount package Ceramic hermetic enclosure Compact footprint suitable for high-density PCB layouts Compatible with standard reflow soldering processes Designed for automated pick-and-place assembly Applications Microcontroller clock generation Wireless communication devices Bluetooth and RF modules IoT and smart devices Industrial automation equipment Embedded control systems Consumer electronics Timing and synchronization circuits Sensor interface modules Portable battery-powered products Compliance RoHS compliant Lead-free package Environmentally friendly manufacturing standards Suitable for commercial and industrial electronic applications #commonpartslibrary #crystal #quartzcrystal #frequencycontrol #timingdevice #clocksource #oscillator #smtcomponent #embeddedsystems #wirelesscommunication #industrialelectronics #consumerelectronics #iotdevices #passivecomponents #electroniccomponents