• Block Diagram Review Demo

    Block Diagram Review Demo

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #SeeedStudio #XIAO #LoRa #RP2040 #IoT

    kerry

    0 Uses

    9 Comments

    1 Star

  • Fire Alarm Circuit

    Fire Alarm Circuit

    Fire Alarm circuit project, a thermistor works as the heat sensor. When temperature increases, its resistance decreases, and vice versa. Fire Alarm system works off a 6V-12V regulated power supply. Timer IC NE555 (IC1) is wired as an astable multivibrator oscillating in audio frequency band.

    adrian95

    0 Uses

    9 Comments

    1 Star

  • LoST Board

    LoST Board

    The "LoST" Board is a Node that interfaces Industrial Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

    collinsemasi

    0 Uses

    9 Comments

    1 Star

  • Robo Project

    Robo Project

    The Robo Project is a mobile robotic platform featuring a Particle Argon board, 4 motor-wheels controlled by L293D drivers, and an HC-SR04 ultrasonic sensor for obstacle detection. It's ideal for exploration, remote control, and robotics education. #project #robot #template #L293D #car

    jharwinbarrozo

    +

    0 Uses

    8 Comments

    1 Star

  • MLX90640 Reference Design

    MLX90640 Reference Design

    This project is a IR camera sensor module based on the TSL25911FN sensor, equipped with I2C communication technique. The module features a 3.3V regulator, I2C level shifter, LEDs, capacitors, resistors, and JST connectors for easy interfacing. #project #Template #projectTemplate #sensor #IR #industrialSensing #referenceDesign #template #reference-design #polygon

    vasy_skral

    +

    0 Uses

    5 Comments

    1 Star

  • TMF8801-1BM Reference Design

    TMF8801-1BM Reference Design

    This is a reference design of a PCB utilizing the TMF8801-1BM time-of-flight (ToF) sensor from ams-OSRAM. It comprises electronic components such as resistors, capacitors, voltage regulators, and GPIO connectors. The logic signals are managed via Mosfets BSS138 while the Sensor IC is powered & controlled by a 3.3V AP2112K Voltage Regulator. #industrialSensing #referenceDesign #lzer #I2C #osramusa #template #reference-design

    vasyl

    +

    0 Uses

    5 Comments

    1 Star

  • lilFlowerPal

    lilFlowerPal

    Autonomous irrigation system for up to 4 individual pots. It has an integrated humidity, pressure and temperature sensor, as well as 4 ports for soil moisture sensors. #esp32 #iot #matter

    cosmoskiller

    +

    0 Uses

    5 Comments

    1 Star

  • Ripe Silver Flux Capacitor

    Ripe Silver Flux Capacitor

    @COPILOT Elimina piezas que tengan elementos metálicos en su estructura. El sistema cuenta con un sensor infrarrojo y uno inductivo, el primero detecta la presencia de una ficha en la zona y el segundo, identifica si una ficha contiene un elemento metálico. Si el sensor inductivo se activa se debe expulsar la ficha con el pistón, esta zona contabiliza el número de piezas rechazadas y las visualiza en un Display LCD

    jjjjjjjjj

    0 Uses

    4 Comments

    1 Star

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    aladdin1

    0 Uses

    3 Comments

    1 Star

  • [QA] Real Professional Project

    [QA] Real Professional Project

    Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

    chaykak2

    +

    0 Uses

    1 Comment

    1 Star

  • Magic Ring

    Magic Ring

    A board with an array of LEDs that are controlled via STM32, and there is also an accelerometer and a temperature sensor! #stm32 #iot #magic #led

    vasyl

    0 Uses

    1 Comment

    1 Star

  • Triple-Axis Accelerometer 4gi1

    Triple-Axis Accelerometer 4gi1

    The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer. This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. There's an address selection pin so you can have two accelerometers share an I2C bus

    oozliuoo

    0 Uses

    1 Comment

    1 Star

  • Seeed Studio XIAO ESP32S3 Sense a323

    Seeed Studio XIAO ESP32S3 Sense a323

    Seeed Studio XIAO ESP32S3 leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB FLASH, and external SD card slot. All of these make it suitable for embedded ML, like intelligent voice and vision AI. #SeeedStudio #xiao

    whisper1606

    0 Uses

    1 Comment

    1 Star

  • N20 Magnetic Encoder

    N20 Magnetic Encoder

    Magnetic Encoder utilizing hall effect sensor for N20 gear motors.

    ricetaco2

    0 Uses

    1 Comment

    1 Star

  • Triple-Axis Accelerometer

    Triple-Axis Accelerometer

    The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer. This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. There's an address selection pin so you can have two accelerometers share an I2C bus

    oozliuoo

    0 Uses

    1 Comment

    1 Star

  • Triple-Axis Accelerometer 1ah4

    Triple-Axis Accelerometer 1ah4

    The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer. This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. There's an address selection pin so you can have two accelerometers share an I2C bus

    oozliuoo

    0 Uses

    1 Comment

    1 Star

  • VEML6075 4d7b

    VEML6075 4d7b

    Optical Sensor Ultraviolet (UV) 330nm, 365nm I²C 4-TFLGA #commonpartslibrary #sensor #opticalsensor #ultraviolet

    romeol01

    0 Uses

    1 Comment

    1 Star

  • ESP32 WiFi Water Flow Meter

    ESP32 WiFi Water Flow Meter

    USB-C powered ESP32 WiFi water flow meter for a 3/4 inch PVC pipe using an external 12V RS485 ultrasonic flow sensor, protected power input, 3.3V logic, status LEDs, and programming/reset support.

    ryanf

    0 Uses

    0 Comments

    1 Star

  • Prototipo NIBP Oscilométrico ESP32

    Prototipo NIBP Oscilométrico ESP32

    Prototipo universitario de monitor de presión arterial NIBP oscilométrico con ESP32, sensor MPX2050GP, acondicionamiento analógico INA333/MCP602 y control de bomba/válvulas de 5 V.

    jhuanse

    0 Uses

    0 Comments

    1 Star

  • Sentinels Hub Air Hex test 2

    Sentinels Hub Air Hex test 2

    Sentinels Hub Air Hex Rev B: matte-black point-top hex 3.3 V I2C environmental sensor breakout with BME690/BME688-compatible footprint, dual Qwiic connectors, protected I2C bus, selectable address, PU_EN pullups, optional DNI SHT45 Pro area, IPC Class 3 manufacturing intent.

    jcajiao

    0 Uses

    0 Comments

    1 Star

  • Dual CAN Wheel Speed System

    Dual CAN Wheel Speed System

    Dual-node 500 kbps CAN wheel speed sensing and DAQ system with STM32G431, protected automotive power, sensor and DAQ peripherals

    mmaazz

    0 Uses

    0 Comments

    1 Star

  • Foolish Blush Power Laces

    Foolish Blush Power Laces

    USB-C Powered Ultra-Low-Power Environmental Sensor Node (ESP32-C6 + SHT45)

    jeffwilde-flux

    0 Uses

    0 Comments

    1 Star

  • Horizontal Pink Electronic Thumb

    Horizontal Pink Electronic Thumb

    nRF52840 Bluetooth 5.0 Sensor Node with Robust Power and Enhanced RF Performance

    sbkim

    0 Uses

    0 Comments

    1 Star

  • mmWave + Climate Sensors ESP32

    mmWave + Climate Sensors ESP32

    Multi Sensor for Home Assistant

    haightjr

    0 Uses

    0 Comments

    1 Star

  • Ultrasonic Distance Meter Reference Design

    Ultrasonic Distance Meter Reference Design

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design

    andresroa

    0 Uses

    0 Comments

    1 Star