This project involves designing a PCB for the lid assembly of an open-source laptop. The design integrates various sensors, including a microphone, camera, and ambient light sensor, ensuring precise alignment with the display glass. It features touch sensors to control LED lighting, spring-loaded contacts for touch-key interaction, and 3D-printed light diffusers for efficient lighting. Additionally, the PCB includes a power management system with status LEDs and a PFC for connecting to the external laptop PCB. The goal is to create a versatile, upgradeable, and user-friendly component for the laptop's lid. Specific parts of the project include 1. Microphone - Audio input capture 2. Ambient Light Sensor Module - Light intensity measurement 3. Camera - Video capture 4. LDO Regulators (3 TLV74 Series) - Voltage regulation for different components 5. Crystal - Clock generation 6. Touch Sensor Controller - Touch-key interaction 7. Flip-Flop - State keeping in logic circuits 8. LEDs (LTRBR37G Series) - Lighting indication 9. FPC Connector - Interface with main laptop PCB

This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design .

The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #SeeedStudio #XIAO #LoRa #RP2040 #IoT

Fire Alarm circuit project, a thermistor works as the heat sensor. When temperature increases, its resistance decreases, and vice versa. Fire Alarm system works off a 6V-12V regulated power supply. Timer IC NE555 (IC1) is wired as an astable multivibrator oscillating in audio frequency band.

The "LoST" Board is a Node that interfaces Industrial Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

The Robo Project is a mobile robotic platform featuring a Particle Argon board, 4 motor-wheels controlled by L293D drivers, and an HC-SR04 ultrasonic sensor for obstacle detection. It's ideal for exploration, remote control, and robotics education. #project #robot #template #L293D #car

This project is a IR camera sensor module based on the TSL25911FN sensor, equipped with I2C communication technique. The module features a 3.3V regulator, I2C level shifter, LEDs, capacitors, resistors, and JST connectors for easy interfacing. #project #Template #projectTemplate #sensor #IR #industrialSensing #referenceDesign #template #reference-design #polygon

This is a reference design of a PCB utilizing the TMF8801-1BM time-of-flight (ToF) sensor from ams-OSRAM. It comprises electronic components such as resistors, capacitors, voltage regulators, and GPIO connectors. The logic signals are managed via Mosfets BSS138 while the Sensor IC is powered & controlled by a 3.3V AP2112K Voltage Regulator. #industrialSensing #referenceDesign #lzer #I2C #osramusa #template #reference-design

Autonomous irrigation system for up to 4 individual pots. It has an integrated humidity, pressure and temperature sensor, as well as 4 ports for soil moisture sensors. #esp32 #iot #matter

@COPILOT Elimina piezas que tengan elementos metálicos en su estructura. El sistema cuenta con un sensor infrarrojo y uno inductivo, el primero detecta la presencia de una ficha en la zona y el segundo, identifica si una ficha contiene un elemento metálico. Si el sensor inductivo se activa se debe expulsar la ficha con el pistón, esta zona contabiliza el número de piezas rechazadas y las visualiza en un Display LCD

This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

A board with an array of LEDs that are controlled via STM32, and there is also an accelerometer and a temperature sensor! #stm32 #iot #magic #led

The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer. This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. There's an address selection pin so you can have two accelerometers share an I2C bus

Seeed Studio XIAO ESP32S3 leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB FLASH, and external SD card slot. All of these make it suitable for embedded ML, like intelligent voice and vision AI. #SeeedStudio #xiao

Magnetic Encoder utilizing hall effect sensor for N20 gear motors.

The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer. This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. There's an address selection pin so you can have two accelerometers share an I2C bus

The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer. This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. There's an address selection pin so you can have two accelerometers share an I2C bus

Optical Sensor Ultraviolet (UV) 330nm, 365nm I²C 4-TFLGA #commonpartslibrary #sensor #opticalsensor #ultraviolet

Integrated PoE lighting-control PCB with 802.3bt PoE input, isolated 24V/3.3V power, Ethernet control, MOSFET dimming, DALI interface, and sensor inputs.

USB-C powered ESP32 WiFi water flow meter for a 3/4 inch PVC pipe using an external 12V RS485 ultrasonic flow sensor, protected power input, 3.3V logic, status LEDs, and programming/reset support.

Prototipo universitario de monitor de presión arterial NIBP oscilométrico con ESP32, sensor MPX2050GP, acondicionamiento analógico INA333/MCP602 y control de bomba/válvulas de 5 V.

Sentinels Hub Air Hex Rev B: matte-black point-top hex 3.3 V I2C environmental sensor breakout with BME690/BME688-compatible footprint, dual Qwiic connectors, protected I2C bus, selectable address, PU_EN pullups, optional DNI SHT45 Pro area, IPC Class 3 manufacturing intent.

Dual-node 500 kbps CAN wheel speed sensing and DAQ system with STM32G431, protected automotive power, sensor and DAQ peripherals

Arctic Tank Monitor — low-power nRF9160 LTE-M sensor node for -40°C tank monitoring. Battery powered from a 3.6 V Li-SOCl2 cell, with TMP117 ambient sensing, external I2C ultrasonic sensor interface, nano-SIM, U.FL LTE antenna, and SWD programming.