IMPORTANT NOTICE: Hey, I opened editing permissions and this doc is broken, see the frozen version here: https://www.flux.ai/markwuflux/on-air-markwu2001-remix-r1-backup-freeze-0b49 R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

Board for air-powered soft robots. Board contains 4 air pumps powered by a 12.4v li-on battery and controlled by fixed buttons

A simple 1-to-3 buffered mult - Eurorack-talk for an audio/CV distributor The board itself is a 3U 4hp rack-mountable module This circuit was designed by https://www.skullandcircuits.com/utilities-buffered-multiple/ and their T&Cs apply to commercial use (I built these for myself)

A simple 1-to-3 buffered mult - Eurorack-talk for an audio/CV distributor The board itself is a 3U 4hp rack-mountable module This circuit was designed by https://www.skullandcircuits.com/utilities-buffered-multiple/ and their T&Cs apply to commercial use (I built these for myself)

Use this template if you plan to get your 1-4 layer boards manufactured with HQ NextPCB (nextpcb.com). This template is designed for generic designs to minimize unnecessary costs and complications where possible. https://www.nextpcb.com/pcb-capabilities #project-template #template #manufacturer-design-rules

This General-Purpose- Alarm-Device repository defines a 'General Purpose Alarm Device' aka, GPAD module. This module has an enclosure and inside is an embedded microcontroller system. #internetOfThings #smartHomeDevices

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

The LoST 3296 board features an Low Power STM32, an RFM95 Module for LoRA connectivity and a connector to interface different sensors. You can hook up a UART module, I2C module and a module using the RS485. The board is powered by the USB-C port

Linear Voltage Regulator with 1 Positive Fixed Output 5.0V. Input voltage 35V max With JST connectors(Vin and +5V) and with block terminal connectors(Vin and +5V) #project-template #voltageregulator #project

This project is a Signal Generator, designed to output waveforms such as sine, square and triangular waves. It leverages the capabilities of operational amplifiers (op-amps) like the LMV321 in combination with resistors and capacitors to shape the output signals. The design benefits from the op-amps' negative feedback to stabilize and regulate the signal output. #project #LMV321

This project is a LoRa temperature sensor. It uses the RP2040 microcontroller and a SHT31 temperature sensor and also RFM95 for LoRa communication #LoRa #referenceDesign #simple-embedded #raspberrypi #template #reference-design

This project is a doorbell system reference design with an integrated camera. It leverages an ESP32 microcontroller for processing, along with various components including resistors, buzzers, and transistors. The system also features a charging circuitry with a USB-C connection for power supply. #referenceDesign #edge-computing #edgeComputing #SeeedStudio #template #iot #esp32#camera #reference-design

This is a LoRa soil monitor Reference Design. It uses a STM32L031G6U6S microcontroller and a RFM95W-915S2 LoRa transceiver, integrated with sensor interfacing and LED indicators. Communication occurs via USART and SPI. The system is powered using a battery. #referenceDesign #simple-embedded #stm #template #reference-design

This is an AI camera board for FPV drones based on the ESP32-S3. ESP32 processes all the data using AI and sends commands to the controller via UART. #FPV #AI #uart #ESP32 #S3 #arduino #drone

This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

Arduino Micro - MIDI Controller It uses the Arduino Micro as USB midi controller. It has 1 capacitive touch octave (12 Keys), 2 rotary encoders, a button, and a proximity sensor that can be used as a mod wheel, sustain pedal or MPE. The oled screen displays the different configuration options. It can be set to any channel or C.C. so it can be used to modify other instruments behavior. The capacitive touch keys can also be used as 12 drum machine pads.

An example development and reference design for the ESP32 microcontroller.

Learn how to use AI Auto Layout on this ESP32 Espresso Smart Scale! In one click you’ll see AI Auto Layout perform magic. Pay close attention to how we recommend creating rulesets, zones, and fanouts. By copying the setup in this example on your own project, you’ll have a fully routed board in no time!

Learn how to use AI Auto Layout on this ESP32 Espresso Smart Scale! In one click you’ll see AI Auto Layout perform magic. Pay close attention to how we recommend creating rulesets, zones, and fanouts. By copying the setup in this example on your own project, you’ll have a fully routed board in no time!

This project comprises a design for an ESP32 based Music Player. It consists of components like ESP32-WROOM-32E for RF/WIFI/MCU functionalities, PCM5102 for audio processing, CH340C for USB to UART communication, and acts as a robust and efficient system for music playback operations. Various supporting components such as capacitors, resistors, LEDs, buttons, etc., further enhance the performance. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #music #MP3 #player #referenceDesign #simple-embedded #espressif #reference-design #polygon

CT Scanner DAS board design based on DDC232 ADC, iCE40 UltraPlus FPGA, and STM32F745 MCU integration. Designed for efficient data acquisition and processing #scanner #ice40 #computedTomography #STM32F745

Breadboard power supply provides both 3.3 and 5V DC to suit all popular microcontrollers such as the Arduino.

Real-time sinewave display using Digispark and microphone input. Visualize sound waves in real-time. #RealTimeVisualization #Digispark #Microphone #Sinewave #AudioVisualization

Use this template if you're planning to get your board manufactured in OSHPARK. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

Turn a PC or Raspberry Pi into a radar lab. Plug-and-play USB-C, protected data lines, dual serial channels, and full access to reset/boot/I2C/UART/SWD for demos, evaluation, and algorithm prototyping.