• ESP32 BMS V1.2

    ESP32 BMS V1.2

    This BMS 10s board for Zinc ion batteries is made of water, zinc, and carbon. The maximum battery voltage is 1.8v. #BMS #zinc #esp32#battery

    vasyl

    vasyl

    +

    vasy_skral

    0 Uses

    15 Comments

    4 Stars

  • i.MX RT1010 LoRa Logger

    i.MX RT1010 LoRa Logger

    This project is a LoRa data logger implementing the i.MX RT1010 microcontroller. It collects and logs data through the LoRa-E5 module and stores the data via a TF card. Capacitors and resistors are used to construct the necessary circuits, ensuring proper functionality. This system is ideal for long-distance, low-power IoT applications. #project #LoRa #RT1010 #SDCARD

    nico

    nico

    0 Uses

    12 Comments

    4 Stars

  • ESP32-S2-MINI-2 Reference Design

    ESP32-S2-MINI-2 Reference Design

    This project is a reference design for an ESP32-S2-MINI-2 based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32S2 #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design #polygon

    vasy_skral

    vasy_skral

    0 Uses

    8 Comments

    4 Stars

  • LoRa Telemetry + GPS Template

    LoRa Telemetry + GPS Template

    This project is a LoRa telemetry with ATGM336H GNSS controlled by ESP32-S2-mini Template #drone #LoRa #rfm9x #ESP32 #controller #referenceDesign #project #template #ATGM336H #GNSS

    vasy_skral

    vasy_skral

    0 Uses

    4 Comments

    4 Stars

  • PICO Smart Automation Controller NextPCB 1-4 Layer Standard Constraints

    PICO Smart Automation Controller NextPCB 1-4 Layer Standard Constraints

    Use this template if you plan to get your 1-4 layer boards manufactured with HQ NextPCB (nextpcb.com). This template is designed for generic designs to minimize unnecessary costs and complications where possible. https://www.nextpcb.com/pcb-capabilities #project-template #template #manufacturer-design-rules

    vasy_skral

    vasy_skral

    +

    jharwinbarrozo

    0 Uses

    0 Comments

    4 Stars

  • General Purpose Alarm Device

    General Purpose Alarm Device

    This General-Purpose- Alarm-Device repository defines a 'General Purpose Alarm Device' aka, GPAD module. This module has an enclosure and inside is an embedded microcontroller system. #internetOfThings #smartHomeDevices

    jecstronic

    jecstronic

    +

    jharwinbarrozo

    0 Uses

    0 Comments

    4 Stars

  • AI Design Reviews

    AI Design Reviews

    Whenever I ask for a design review, I need you to test each of these individual aspects one by one: - All reset/enable have an external pull-up or pull-down resistors - None of the floating pins require pull-up or pull-down resistors - All resistor’s voltage rating is sufficient for the maximum voltage applied. If any resistor doesn't contain voltage rating please flag this clearly as an error.

    nico

    nico

    0 Uses

    21 Comments

    3 Stars

  • ESP32-H2 Relay Board

    ESP32-H2 Relay Board

    This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

    vasyl

    vasyl

    +

    snapscan

    0 Uses

    98 Comments

    3 Stars

  • LoST 3296 Board

    LoST 3296 Board

    The LoST 3296 board features an Low Power STM32, an RFM95 Module for LoRA connectivity and a connector to interface different sensors. You can hook up a UART module, I2C module and a module using the RS485. The board is powered by the USB-C port

    emasicollins

    0 Uses

    66 Comments

    3 Stars

  • Raspberry Pi 4 Hat Template

    Raspberry Pi 4 Hat Template

    Template for Raspberry Pi 4 Shield. Include an official pinout so you will always know Raspberry Pi names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Raspberry Pi itself along with the board outline on the silkscreen. #RaspberryPi #Raspberry #Pi #RPi #Shield #template #project #project-template #raspberry

    vasy_skral

    vasy_skral

    0 Uses

    41 Comments

    3 Stars

  • Signal Generator

    Signal Generator

    This project is a Signal Generator, designed to output waveforms such as sine, square and triangular waves. It leverages the capabilities of operational amplifiers (op-amps) like the LMV321 in combination with resistors and capacitors to shape the output signals. The design benefits from the op-amps' negative feedback to stabilize and regulate the signal output. #project #LMV321

    vasy_skral

    vasy_skral

    0 Uses

    30 Comments

    3 Stars

  • LoRa temperature sensor Reference Design

    LoRa temperature sensor Reference Design

    This project is a LoRa temperature sensor. It uses the RP2040 microcontroller and a SHT31 temperature sensor and also RFM95 for LoRa communication #LoRa #referenceDesign #simple-embedded #raspberrypi #template #reference-design

    vasyl

    vasyl

    0 Uses

    26 Comments

    3 Stars

  • WiFi Soil Monitor reference design

    WiFi Soil Monitor reference design

    This is a WiFi Soil Monitor reference design based on ESP32-S3 microcontroller for WiFi connectivity, a Type-C USB for power #referenceDesign #simple-embedded #espressif #template #reference-design

    vasyl

    vasyl

    0 Uses

    23 Comments

    3 Stars

  • Doorbell with Camera Reference Design

    Doorbell with Camera Reference Design

    This project is a doorbell system reference design with an integrated camera. It leverages an ESP32 microcontroller for processing, along with various components including resistors, buzzers, and transistors. The system also features a charging circuitry with a USB-C connection for power supply. #referenceDesign #edge-computing #edgeComputing #SeeedStudio #template #iot #esp32#camera #reference-design

    vasyl

    vasyl

    0 Uses

    17 Comments

    3 Stars

  • LoRa soil monitor Reference Design

    LoRa soil monitor Reference Design

    This is a LoRa soil monitor Reference Design. It uses a STM32L031G6U6S microcontroller and a RFM95W-915S2 LoRa transceiver, integrated with sensor interfacing and LED indicators. Communication occurs via USART and SPI. The system is powered using a battery. #referenceDesign #simple-embedded #stm #template #reference-design

    vasyl

    vasyl

    +

    0 Uses

    14 Comments

    3 Stars

  • ESP32-S3 AI FPV Camera

    ESP32-S3 AI FPV Camera

    This is an AI camera board for FPV drones based on the ESP32-S3. ESP32 processes all the data using AI and sends commands to the controller via UART. #FPV #AI #uart #ESP32 #S3 #arduino #drone

    vasyl

    vasyl

    +

    jharwinbarrozo

    0 Uses

    11 Comments

    3 Stars

  • Raspberry Pi 5 Hat Template

    Raspberry Pi 5 Hat Template

    Template for Raspberry Pi 5 Model Shield. Include an official pinout so you will always know Raspberry Pi names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Raspberry Pi itself along with the board outline on the silkscreen. #RaspberryPi #Raspberry #RaspberryPi5 #raspberry #Pi #RPi #Shield #template #project #project-template

    vasy_skral

    vasy_skral

    0 Uses

    9 Comments

    3 Stars

  • ESP32-WROOM-32E Reference Design ePe2

    ESP32-WROOM-32E Reference Design ePe2

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    pauguardia

    0 Uses

    9 Comments

    3 Stars

  • Native Bee Hotel V3

    Native Bee Hotel V3

    (Work In Progress) V3 of the Bee Hotel: Main goal is to be manufacturable by JLCPCB

    markwuflux

    0 Uses

    4 Comments

    3 Stars

  • Arduino Nano Shield Template

    Arduino Nano Shield Template

    Template for Arduino Nano Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Nano itself along with the board outline on the silkscreen. #Arduino #Nano #Shield #template #project #project-template

    vasy_skral

    vasy_skral

    +

    jharwinbarrozo

    0 Uses

    2 Comments

    3 Stars

  • Blinking LED Demo

    Blinking LED Demo

    This is NOT the new user onboarding example project

    natarius

    +

    jharwinbarrozo

    0 Uses

    1 Comment

    3 Stars

  • Raspberry Pi Model B Hat Template

    Raspberry Pi Model B Hat Template

    Template for Raspberry Pi 2, 3, 4 or 400 Model B+ Shield. Include an official pinout so you will always know Raspberry Pi names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Raspberry Pi itself along with the board outline on the silkscreen. #RaspberryPi #Raspberry #Pi #RPi #Shield #template #project #project-template

    vasy_skral

    vasy_skral

    0 Uses

    1 Comment

    3 Stars

  • MGM240P Example

    MGM240P Example

    This is a project of an energy-efficient temperature and humidity sensor that works via Zigbee #Zigbee #sensor #iot #template #project

    vasyl

    vasyl

    0 Uses

    0 Comments

    3 Stars

  • Pico Macro Keyboard

    Pico Macro Keyboard

    The Pico Macro Keyboard is a compact and powerful macro pad built using the latest Raspberry Pi Pico 2. Inspired by the Figma Creator Micro, this keyboard is designed for customizable control and enhanced productivity. It features mechanical switches with per-key RGB lighting, along with two rotary encoders for added functionality. With a modular 4-layer PCB and fully customizable keymaps, it seamlessly integrates with any software, making it perfect for designers, gamers, and power users alike.

    vasy_skral

    vasy_skral

    +

    jharwinbarrozo

    0 Uses

    0 Comments

    3 Stars

  • Custom Test Platform V1

    Custom Test Platform V1

    I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

    markwuflux

    0 Uses

    20 Comments

    2 Stars

  • PCB Business Card

    PCB Business Card

    Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the awesome [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    flux

    +

    nico

    0 Uses

    3 Comments

    2 Stars

  • PC Game Controller Any Help?

    PC Game Controller Any Help?

    I don't want to buy an Xbox Controller, so I'm just making one by myself

    afnailon

    +

    +4

    0 Uses

    0 Comments

    2 Stars

  • Drone

    Drone

    This PCB is for a quad copter drone. The drone will use a 4S lipo battery as a power supply and each of the motors will use 30Amp ESC's. The microcontroller that handles the RF signals is a Raspberry Pi Pico.

    rafaelzasas

    0 Uses

    211 Comments

    2 Stars

  • SelfCare Plant Final Design

    SelfCare Plant Final Design

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    orlando113

    0 Uses

    173 Comments

    2 Stars

  • USB to Serial Breakout - FT232RL

    USB to Serial Breakout - FT232RL

    This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPROM, and a 28-pin SSOP package this is a serious little chip.

    adrian95

    0 Uses

    39 Comments

    2 Stars

  • 7-Segment Controller Rev B

    7-Segment Controller Rev B

    This is a 7-segment controller. It runs on a 3-bit counter so the count is from 0-7. Buttons to toggle reset, pause, increment. Knobs to control speed and lighting configuration. Try the simulation here: https://www.flux.ai/jbreidfjord-dev/7-seg-3-bit-counter

    jlamflux

    0 Uses

    38 Comments

    2 Stars

  • STM32 Ethernet board

    STM32 Ethernet board

    It is a board based on STM32L4 with a built-in ethernet IC W5500 that allows you to create IoT projects based on the modern ARM Cortex®-M4 core. A connector with SWD interface and USB C for communication are provided for the firmware #IoT #ARM #STM #Ethernet #W5500 #IC #project

    vasyl

    vasyl

    0 Uses

    29 Comments

    2 Stars

  • SparkFun Load Cell Amplifier - HX711

    SparkFun Load Cell Amplifier - HX711

    The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.

    adrian95

    0 Uses

    28 Comments

    2 Stars

  • Robo Project

    Robo Project

    The Robo Project is a mobile robotic platform featuring a Particle Argon board, 4 motor-wheels controlled by L293D drivers, and an HC-SR04 ultrasonic sensor for obstacle detection. It's ideal for exploration, remote control, and robotics education. #project #robot #template #L293D #car

    datnapafunk

    +

    0 Uses

    25 Comments

    2 Stars

  • The Green Dot 2040E5 Board

    The Green Dot 2040E5 Board

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

    kerry

    0 Uses

    24 Comments

    2 Stars

  • Arduino ATMEGA2560-16AU Template

    Arduino ATMEGA2560-16AU Template

    Arduino Template based on ATMEGA2560-16AU. This MCU is used in Arduino Mega2560, Arduino Arduino Mega ADK, and some other. This template is a good starting point for your Arduino based project. #Arduino #mega #2560 #ATMEGA2560 #template #project #project-template

    vasy_skral

    vasy_skral

    0 Uses

    22 Comments

    2 Stars

  • Gesture Light Switch Relay Reference Design

    Gesture Light Switch Relay Reference Design

    This project is a Gesture Light Switch Relay Reference Design. It involves an STM32 microcontroller (STMicroelectronics) that interacts with an APDS-9960 sensor (Broadcom) to detect hand gestures. The gesture data is used to control a Toshiba TLP175A relay and an Everlight tri-color LED to switch the light and change colors, respectively. Power is supplied by a Diodes Incorporated's AP2112K-3.3TRG1 regulator. #referenceDesign #edge-computing #edgeComputing #stm #relay #sensors #reference-design

    vasyl

    vasyl

    0 Uses

    21 Comments

    2 Stars

  • Switched-Mode Power Supply (SMPS)

    Switched-Mode Power Supply (SMPS)

    This project is a Switched-Mode Power Supply (SMPS) design. The design incorporates an AC DC Converter (NCP1203D100R2), polarized capacitors, resistors, diodes, connectors, a transistor, a transformer and an integrated circuit. #AC #DC #POWER #NCP1203 #project

    vasyl

    vasyl

    0 Uses

    19 Comments

    2 Stars

  • The Green Dot 2040E5 Board krN5

    The Green Dot 2040E5 Board krN5

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

    nico

    nico

    0 Uses

    18 Comments

    2 Stars

  • FM_Transmitter

    FM_Transmitter

    This is one of the simplest FM transmitters that can be built. It does not require any tuning, and transmit frequency is crystal locked to 90MHz. It eliminates frequency drift common to LC-based FM transmitters. This design is best suited for broadcasting voice or music up to a distance of fifty metres depending on the antenna used.

    jecstronic

    jecstronic

    0 Uses

    17 Comments

    2 Stars

  • LoRa to WiFi Gateway Reference Design

    LoRa to WiFi Gateway Reference Design

    This project is a LoRa to WiFi Gateway using an ESP32 microcontroller. The design incorporates a LoRa transceiver and a WiFi module to facilitate data transfer between LoRa and WiFi protocols. This gateway can be directly implemented in IoT-based applications where field devices using LoRa need to communicate with WiFi-enabled devices. #referenceDesign #project #ESP32 #LoRa #lora #hub #gateway #ESP32WROOM #RF #WIFI #MCU #referenceDesign #edge-computing #espressif #seeed #seeed-technology #reference-design

    vasy_skral

    vasy_skral

    +

    0 Uses

    15 Comments

    2 Stars

  • Aquatimer

    Aquatimer

    AquaTimer is a programmable timer for 12V devices such as lighting, solenoid valves or pumps not only for aquariums. It has three switchable channels for currents up to 2A each and up to 5A in total. Connected lighting can be dimmed if desired and slowly faded in and out to simulate sunrises and sunsets. The internal RTC of the ATtiny is used as a clockwork in conjunction with a 32.768kHz crystal. A backup battery keeps the clock running even if the external power supply is interrupted. Settings are made using three buttons and the OLED display.

    jecstronic

    jecstronic

    0 Uses

    14 Comments

    2 Stars

  • BQ25895 Reference Design

    BQ25895 Reference Design

    This project is a reference design based on the BQ25895, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ25895 #ReferenceDesign #charger #BatteryManagemen #referenceDesign #bms #texas-instruments #template #reference-design #polygon

    vasy_skral

    vasy_skral

    +

    0 Uses

    14 Comments

    2 Stars

  • Picobuck Led Driver (AL8805W5)

    Picobuck Led Driver (AL8805W5)

    (AL8805W5) The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. By default, each channel is driven at 330mA; that current can be reduced by either presenting an analog voltage or a PWM signal to the board. Version 12 of the board adds a solderable jumper that can be closed to increase the maximum current to 660mA. The new voltage regulator also increased the voltage rating on the various components on the board, allowing it to be used up to the full 36V rating of the AL8805 part.

    adrian95

    +

    jharwinbarrozo

    0 Uses

    13 Comments

    2 Stars

  • Jellybean

    Jellybean

    The best way to have a friend is to build one. Jellybean is a robot friend whose gonna be right with you. Jellybean has been designed with a number of sensors to be able to interact with the environment and with the owner.

    collinsemasi

    0 Uses

    12 Comments

    2 Stars

  • Raspberry Pi 3B+ Hat Template

    Raspberry Pi 3B+ Hat Template

    Template for Raspberry Pi 3 Model B+ Shield. Include an official pinout so you will always know Raspberry Pi names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Raspberry Pi itself along with the board outline on the silkscreen. #RaspberryPi #Raspberry #raspberry #raspberrypi #Pi #RPi #Shield #template #project #project-template

    vasy_skral

    vasy_skral

    0 Uses

    10 Comments

    2 Stars

  • VL53L4CD Reference Design

    VL53L4CD Reference Design

    This project is a reference design for a VL53L4CD-based sensor circuit. It incorporates the use of a Texas Instruments LP5907MFX-2.8/NOPB to regulate the supply voltage. #referenceDesign #VL53L4CD #project #template #LIDAR #sensor #distance #referenceDesign #industrialsensing #stm #template #reference-design #polygon

    vasy_skral

    vasy_skral

    0 Uses

    7 Comments

    2 Stars

  • Interruptor de luz con control gestual

    Interruptor de luz con control gestual

    This project is a Gesture Light Switch Relay Reference Design. It involves an STM32 microcontroller (STMicroelectronics) that interacts with an APDS-9960 sensor (Broadcom) to detect hand gestures. The gesture data is used to control a Toshiba TLP175A relay and an Everlight tri-color LED to switch the light and change colors, respectively. Power is supplied by a Diodes Incorporated's AP2112K-3.3TRG1 regulator. #referenceDesign #edge-computing #edgeComputing #stm #relay #sensors #reference-design

    jorgeariasuisrael

    0 Uses

    5 Comments

    2 Stars

  • Simple Charger Modul

    Simple Charger Modul

    This is a simple charger modul that can be connected to a DC generator or solar panel at the input and a battery at the output

    yogi-alfian-saputra

    0 Uses

    4 Comments

    2 Stars

  • 619 J Stepper

    619 J Stepper

    This project is an open source micro-controller board used to drive a stepper motor in closed loop mode. The board is generally used on 3D printer steppers or CNC steppers to prevent losing steps. The project is inspired by Tropical labs: Mechaduino board #motorControllers

    adrian95

    0 Uses

    3 Comments

    2 Stars