25 MHz TCXO HCMOS Oscillator 3.3V Enable/Disable 4-SMD, No Lead ASTX-H12 25.000 MHz Abracon ASTX-H12 HCMOS output SMD TCXO, 2.5 x 2.0 x 0.9mm package, 3.2MHz to 55MHz frequency range, standard frequencies 5MHz to 44MHz, 3.3V typical supply voltage, frequency stability up to ±2.5ppm over temperature, ±2.0ppm tolerance at 25°C, low current consumption, 15pF load, 5ns max rise/fall time, tri-state standby function, MSL-1, RoHS/RoHS II compliant, suitable for cellular phones, wireless modules, GPS, RF communication and precision clock reference applications. Search Keywords: ASTX-H12, Abracon ASTX-H12, ASTX-H12 TCXO, HCMOS TCXO, SMD TCXO 2.5x2.0mm, 3.3V TCXO, 26MHz TCXO, 40MHz TCXO, 3.2MHz to 55MHz TCXO, low power TCXO, precision clock oscillator, RF reference oscillator, GPS TCXO, wireless module TCXO, ASTX-H12 datasheet Hashtags: #ASTXH12 #AbraconASTXH12 #TCXO #HCMOSTCXO #SMDOscillator #CrystalOscillator #TemperatureCompensatedOscillator #33VTCXO #25x20mmOscillator #PrecisionClock #FrequencyReference #RFOscillator #GPSOscillator #WirelessClock

AMS 5812 is a series of high precision pressure sensors combining a ratiometric analog voltage output with a digital I2C output. They are calibrated and compensated in a temperature range of -25 ... 85 °C. The PCB- mountable sensors are available in a ceramic DIP package in variants with tube fittings or for o-ring sealing. Datasheet Pressure Sensor AMS5812: https://www.analog-micro.com/products/pressure-sensors/board-mount-pressure-sensors/ams5812/

In this fork, I just added extra pads that align with the dimensions in the amazon page in the datasheet URL. This is my first time using the chip, so I am not sure what the real dimensions are. The step-down module is equipped with a LM2596 regulator and allows input voltages between 3 and 40 V to an adjustable output voltage from 1.5 to 35 V.

ESD and Surge Protection (TVS/ESD) TPD2E001DRLR SOT-553-5_L1.6-W1.2-P0.50-LS1.6-BR LCSC Part Number: C3040099 JLCPCB Part Class: Extended Part Manufactured by Leiditech(雷卯电子) Texas Instruments TPD2E001 low-capacitance 2-channel ESD/TVS protection diode array for high-speed data interfaces, IEC 61000-4-2 Level 4 ESD protection, ±8kV contact discharge and ±15kV air-gap discharge, 1.5pF typical IO capacitance, 1nA max leakage current, 0.9V to 5.5V supply voltage range, suitable for USB 2.0, Ethernet, FireWire, LVDS and other high-speed signal line protection, available in SOT-5, WSON-6, USON-6 and SOP-4 packages. Search Keywords: TPD2E001, TI TPD2E001, Texas Instruments TPD2E001, TPD2E001 ESD protection, TPD2E001 TVS diode, TPD2E001 USB protection, TPD2E001DRL, TPD2E001DRLR, TPD2E001 low capacitance, 2 channel ESD protection, USB 2.0 ESD protection diode, high speed data line protection, low capacitance TVS array, TPD2E001 datasheet, TPD2E001 SOT-5, TPD2E001 WSON-6, TPD2E001 USON-6 Hashtags: #TPD2E001 #TPD2E001DRL #TPD2E001DRLR #TexasInstruments #TIESDProtection #ESDProtection #TVSDiode #TVSArray #ESDDiodeArray #LowCapacitanceTVS #2ChannelESDProtection #USBProtection #USB2Protection #HighSpeedDataProtection #SignalLineProtection #IEC6100042 #Level4ESD #SOT5 #WSON6 #USON6 #SOP4

TRIACs BTA16-600BQ TO-220-3_L10.2-W4.5-P2.54-L-1 LCSC Part Number: C602638 JLCPCB Part Class: Extended Part Manufactured by WeEn(瑞能) WeEn BTA16-600B planar passivated 4-quadrant triac, 600V class bidirectional AC switching device, internally insulated SOT78D / IITO-220 plastic package, high voltage capability, high junction operating temperature up to 150°C, least sensitive gate for high noise immunity, triggering in all four quadrants, isolated mounting base with 2500V RMS isolation, suitable for general-purpose switching, phase control, compressor starting circuits and motor control applications. Search Keywords: BTA16-600B, WeEn BTA16-600B, BTA16 600B triac, 4Q triac, 4 quadrant triac, 600V triac, insulated triac, SOT78D triac, IITO-220 triac, phase control triac, AC switching triac, motor control triac, compressor starting triac, BTA16-600B datasheet Hashtags: #BTA16600B #WeEnBTA16600B #WeEnTriac #Triac #4QTriac #4QuadrantTriac #600VTriac #ACTriac #BidirectionalSwitch #PhaseControlTriac #MotorControlTriac #CompressorStartTriac #SOT78D #IITO220 #InsulatedTriac

Attitude Sensors LSM6DSO32TR LGA-14_L3.0-W2.5-P0.50-TL LCSC Part Number: C1864162 JLCPCB Part Class: Extended Part Manufactured by ST(意法半导体)STMicroelectronics LSM6DSO32 iNEMO 6-axis inertial measurement unit, integrated always-on 3D digital accelerometer and 3D digital gyroscope, accelerometer full-scale ranges ±4/±8/±16/±32g, gyroscope full-scale ranges ±125/±250/±500/±1000/±2000dps, low power consumption, 1.71V to 3.6V supply voltage, SPI/I2C/MIPI I3C interface, smart FIFO up to 9kbytes, embedded pedometer, step detector, tilt detection and motion functions, embedded temperature sensor, -40°C to +85°C operating range, compact 14-lead LGA 2.5 x 3.0 x 0.83mm package. Search Keywords: LSM6DSO32, ST LSM6DSO32, STMicroelectronics LSM6DSO32, LSM6DSO32TR, iNEMO inertial module, 6-axis IMU, 3D accelerometer gyroscope, 32g accelerometer, 2000dps gyroscope, LSM6DSO32 IMU sensor, LSM6DSO32 accelerometer, LSM6DSO32 gyroscope, SPI I2C I3C IMU, LGA-14 IMU, 2.5x3mm IMU, LSM6DSO32 datasheet Hashtags: #LSM6DSO32 #LSM6DSO32TR #STMicroelectronics #STIMU #iNEMO #IMUSensor #6AxisIMU #Accelerometer #Gyroscope #3DAccelerometer #3DGyroscope #32gAccelerometer #2000dpsGyroscope #I2CSensor #SPISensor #I3CSensor #LGA14 #MotionSensor

ARM-MSeries LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS ST Microelectronics STM32G0B1CBT6 LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL LCSC Part Number: C2847904 JLCPCB Part Class: Extended Part Manufactured by ST(意法半导体) STMicroelectronics STM32G0B1 series 32-bit Arm Cortex-M0+ microcontroller, up to 64MHz CPU frequency, 1.7V to 3.6V operating voltage, up to 512KB Flash memory and 144KB SRAM, USB 2.0 full-speed device/host support, USB Type-C Power Delivery controller, FDCAN, I2C, USART, SPI, HDMI CEC, 12-bit ADC, 12-bit DACs, timers, RTC, DMA, CRC unit, SWD debug interface, 96-bit unique ID, operating temperature options up to -40°C to +125°C, available in LQFP, UFQFPN, UFBGA and WLCSP packages. Search Keywords: STM32G0B1, STM32G0B1xB, STM32G0B1xC, STM32G0B1xE, STMicroelectronics STM32G0B1, STM32G0B1 MCU, STM32G0B1 microcontroller, Arm Cortex-M0+ microcontroller, STM32G0 64MHz MCU, STM32G0B1 USB Type-C PD, STM32G0B1 USB FS, STM32G0B1 FDCAN, STM32G0B1 512KB Flash, STM32G0B1 144KB SRAM, STM32G0B1 LQFP, STM32G0B1 UFQFPN, STM32G0B1 UFBGA, STM32G0B1 WLCSP, STM32G0B1 datasheet Hashtags: #STM32G0B1 #STM32G0B1xB #STM32G0B1xC #STM32G0B1xE #STMicroelectronics #STM32MCU #STM32G0 #ArmCortexM0Plus #32bitMicrocontroller #64MHzMCU #512KBFlashMCU #144KBSRAM #USBTypeCPD #USBFS #FDCAN #I2CMCU #SPIMCU #USARTMCU #ADCmicrocontroller #DACmicrocontroller #LQFP #UFQFPN #UFBGA #WLCSP

DC-DC Converters LMR33630ADDA ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP-1 LCSC Part Number: C2866787 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments LMR33630 SIMPLE SWITCHER synchronous step-down DC/DC converter, 3.8V to 36V input voltage range, adjustable output voltage from 1V to 24V, 3A output current, integrated 75mΩ/50mΩ power MOSFETs, peak efficiency above 95%, low 25µA operating quiescent current, selectable switching frequency 400kHz, 1.4MHz or 2.1MHz, 68ns minimum on-time, power-good and precision enable pins, thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit and hiccup short-circuit protection, -40°C to +125°C junction temperature range, available in HSOIC-8 and VQFN-12 packages. Search Keywords: LMR33630, Texas Instruments LMR33630, TI LMR33630, LMR33630 SIMPLE SWITCHER, LMR33630 buck converter, LMR33630 step down converter, LMR33630 synchronous buck, 3A buck converter, 36V buck converter, 3.8V to 36V DC DC converter, adjustable buck converter 1V to 24V, LMR33630 HSOIC-8, LMR33630 VQFN-12, LMR33630 400kHz, LMR33630 2.1MHz, LMR33630 datasheet, industrial buck converter, low EMI buck converter Hashtags: #LMR33630 #TexasInstrumentsLMR33630 #TIBuckConverter #SIMPLESWITCHER #BuckConverter #StepDownConverter #SynchronousBuck #DCDCConverter #3ABuckConverter #36VBuckConverter #AdjustableBuckConverter #LowEMIBuckConverter #IndustrialBuckConverter #PowerGoodConverter #HSOIC8 #VQFN12 #400kHzBuck #21MHzBuck

TPS259621DDAR ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP LCSC Part Number: C2155774 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TPS2596 eFuse integrated FET hot-swap protection IC, 2.7V to 19V input voltage range, 21V absolute maximum input rating, 0.125A to 2A adjustable current limit, 89mΩ typical on-resistance, accurate current monitor output, active-high enable with adjustable UVLO, fast overvoltage clamp or adjustable OVLO options, adjustable output slew-rate control, overtemperature protection, fault indication pin, IEC 61000-4-4 EFT immunity, -40°C to +125°C junction temperature range, SOIC-8 package. Search Keywords: TPS2596, Texas Instruments TPS2596, TI TPS2596, TPS2596 eFuse, TPS2596 hot swap controller, TPS2596 power protection IC, TPS2596 current limit switch, TPS259620DDA, TPS259621DDA, TPS259630DDA, TPS259631DDA, 2A eFuse, 19V eFuse, 89mOhm eFuse, adjustable current limit eFuse, overvoltage protection eFuse, current monitor eFuse, SOIC-8 eFuse, TPS2596 datasheet Hashtags: #TPS2596 #TexasInstrumentsTPS2596 #TIEFuse #eFuse #HotSwapProtection #PowerProtectionIC #CurrentLimitSwitch #IntegratedFETSwitch #2AeFuse #19VeFuse #89mOhmSwitch #OvervoltageProtection #UVLOProtection #CurrentMonitorIC #FaultIndicator #SOIC8 #TPS259620DDA #TPS259621DDA #TPS259630DDA #TPS259631DDA

WiFi Modules ESP32-S3-MINI-1-N4R2 BULETM-SMD_ESP32-S3-MINI-1-N8 LCSC Part Number: C3013941 JLCPCB Part Class: Extended Part Manufactured by ESPRESSIF Espressif ESP32-S3-MINI-1/1U Wi-Fi and Bluetooth LE MCU module based on ESP32-S3, dual-core 32-bit Xtensa LX7 processor up to 240MHz, supports 2.4GHz Wi-Fi and Bluetooth LE, 8MB Quad SPI flash, optional 2MB Quad SPI PSRAM, up to 80MHz SPI flash clock, integrated low-power co-processor, -40°C to +85°C operating temperature, compact SMD module for IoT, smart home, embedded systems and wearable electronics; ESP32-S3-MINI-1 includes PCB antenna, ESP32-S3-MINI-1U supports external antenna connector. Search Keywords: ESP32-S3-MINI-1, ESP32-S3-MINI-1U, ESP32-S3-MINI-1-N8, ESP32-S3-MINI-1-N4R2, ESP32-S3-MINI-1U-N8, ESP32-S3-MINI-1U-N4R2, Espressif ESP32-S3-MINI, ESP32-S3 WiFi Bluetooth module, ESP32-S3 BLE module, ESP32-S3 MCU module, ESP32-S3-MINI 8MB flash, ESP32-S3-MINI 2MB PSRAM, ESP32-S3-MINI PCB antenna, ESP32-S3-MINI external antenna, ESP32-S3-MINI-1U antenna connector, ESP32-S3 SMD module, ESP32-S3 IoT module, ESP32-S3-MINI datasheet Hashtags: #ESP32S3MINI1 #ESP32S3MINI1U #ESP32S3MINI1N8 #ESP32S3MINI1N4R2 #ESP32S3MINI1UN8 #ESP32S3MINI1UN4R2 #Espressif #ESP32S3 #ESP32Module #WiFiModule #BluetoothLEModule #BLEModule #MCUModule #IoTModule #SMDModule #PCBantenna #ExternalAntenna #XtensaLX7 #8MBFlash #2MBPSRAM

DC-DC Controllers LM5146QRGYRQ1 VQFN-20_L4.5-W3.5-P0.50-BL-EP-1 LCSC Part Number: C1850329 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments LM5146-Q1 100V synchronous buck DC/DC controller for automotive applications, AEC-Q100 Grade 1 qualified, 5.5V to 100V wide input voltage range, adjustable output voltage from 0.8V to 60V, 150°C maximum junction temperature, 100% duty cycle operation during input voltage dips, 40ns minimum high-side on-time, 140ns minimum off-time, switching frequency from 100kHz to 1MHz with synchronization capability, 7.5V gate drivers for standard VTH MOSFETs, 2.3A source and 3.5A sink gate drive capability, lossless RDS(on) or shunt current sensing, adjustable soft-start, hiccup overcurrent protection, UVLO, PGOOD indicator, thermal shutdown, 20-pin VQFN package. Search Keywords: LM5146-Q1, Texas Instruments LM5146-Q1, TI LM5146-Q1, LM5146 automotive buck controller, 100V synchronous buck controller, AEC-Q100 buck controller, LM5146-Q1 VQFN-20, wide input buck controller, 5.5V to 100V buck controller, 0.8V to 60V output controller, 48V automotive buck controller, HEV EV buck controller, ADAS buck controller, LM5146-Q1 datasheet Hashtags: #LM5146Q1 #TexasInstrumentsLM5146Q1 #TIBuckController #SynchronousBuckController #100VBuckController #AutomotiveBuckController #AECQ100 #WideInputController #48VAutomotive #HEVPowerSupply #EVPowerSupply #ADASPower #MOSFETGateDriver #CurrentModeController #VQFN20

Battery Management ICs BQ27441DRZT-G1B SON-12_L4.0-W2.5-P0.40-BL-EP LCSC Part Number: C544786 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments bq27441-G1 system-side Impedance Track battery fuel gauge for single-cell Li-Ion batteries, supports embedded or removable battery packs, powered directly from battery with integrated LDO, uses low-value 10mΩ external sense resistor, reports remaining capacity, state-of-charge, state-of-health and battery voltage, automatically compensates for battery aging, self-discharge, temperature and rate changes, supports 400kHz I2C interface, configurable SOC interrupt or low battery warning output, internal temperature sensor or host-reported temperature, compact 12-pin VSON 2.5 x 4.0mm package. Search Keywords: bq27441-G1, BQ27441-G1, Texas Instruments bq27441-G1, TI bq27441-G1, bq27441 fuel gauge, bq27441-G1 fuel gauge, single cell Li-Ion fuel gauge, battery fuel gauge IC, Impedance Track fuel gauge, system side fuel gauge, I2C battery fuel gauge, SOC battery monitor, SOH battery monitor, Li-Ion battery monitor IC, bq27441-G1 VSON-12, 2.5x4.0mm fuel gauge, bq27441-G1 datasheet Hashtags: #bq27441G1 #BQ27441G1 #TexasInstrumentsBQ27441 #TIFuelGauge #BatteryFuelGauge #LiIonFuelGauge #SingleCellFuelGauge #ImpedanceTrack #SystemSideFuelGauge #BatteryMonitorIC #SOCMonitor #SOHMonitor #I2CFuelGauge #400kHzI2C #LowBatteryWarning #VSON12 `#25x40mmPackage

ST Microelectronics STM32L432KCU6 UFQFPN-32_L5.0-W5.0-P0.50-TL-EP3.5 LCSC Part Number: C1337280 JLCPCB Part Class: Extended Part Manufactured by ST(意法半导体) STMicroelectronics STM32L432KC ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU running up to 80MHz, featuring 256KB Flash memory, 64KB SRAM, USB 2.0 Full-Speed device support, Quad-SPI interface, RTC with calendar and alarms, true random number generator (TRNG), DMA controller, CAN 2.0B, UART, LPUART, SPI, I2C, SAI audio interface, 12-bit 5MSPS ADC, dual 12-bit DACs, operational amplifier with PGA, comparators, capacitive sensing channels, advanced timers and ultra-low-power modes. Operates from 1.71V to 3.6V and is optimized for battery-powered, industrial, medical, IoT and portable embedded applications. Search Keywords: STM32L432KC, STM32L432KCU6, STM32L432KCU6TR, STM32L432, STM32L4 series, STM32 Cortex-M4 MCU, STM32 low power microcontroller, STM32 256KB Flash 64KB SRAM, STM32 USB FS MCU, STM32 CAN MCU, STM32 Quad SPI MCU, STM32L432 datasheet, STM32L432 development board, Nucleo-L432KC, ARM Cortex-M4 FPU Hashtags: #STM32L432KC #STM32L432KCU6 #STM32L432 #STM32L4 #STMicroelectronics #CortexM4 #ARMMicrocontroller #LowPowerMCU #EmbeddedSystems #USBFS #CANBus #QuadSPI #ADC12bit #DAC12bit #RTC #TRNG #IoTMCU #IndustrialMCU #MedicalElectronics #NucleoL432KC

Battery Management ICs BQ25120AYFPT DSBGA-25_L2.6-W2.5-R5-C5-P0.40-BL LCSC Part Number: C2861317 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments bq25120A highly integrated low-Iq battery charge management IC for wearables and IoT devices, supports up to 300mA battery charge current, configurable 300mA buck regulator with 1.8V default output, configurable load switch or 100mA LDO output, power path management, battery voltage regulation from 3.6V to 4.65V in 10mV steps, configurable termination current down to 500µA, simple voltage-based battery monitor, push-button wake-up and reset, I2C control interface, 3.4V to 5.5V input voltage range, low quiescent current, suitable for smart watches, fitness accessories, medical wearables and rechargeable toys, 25-ball DSBGA 2.5 x 2.5mm package. Search Keywords: bq25120A, Texas Instruments bq25120A, TI bq25120A, BQ25120A battery charger, bq25120A PMIC, bq25120A wearable charger, bq25120A IoT charger, low Iq battery charger IC, integrated battery charge management IC, 300mA battery charger, power path battery charger, I2C battery charger, bq25120A buck regulator, bq25120A LDO, bq25120A DSBGA-25, bq25120A 2.5x2.5mm, bq25120A datasheet Hashtags: #bq25120A #BQ25120A #TexasInstrumentsBQ25120A #TIBatteryCharger #BatteryChargerIC #BatteryChargeManagement #WearablePMIC #IoTPMIC #LowIqCharger #PowerPathManagement #300mACharger #BuckRegulatorPMIC #I2CCharger #LiIonCharger #WearableCharger #DSBGA25 #25BallDSBGA

ATTINY1616-MFR QFN-20_L3.0-W3.0-P0.40-TL-EP1.7 LCSC Part Number: C1338523 JLCPCB Part Class: Extended Part Manufactured by MICROCHIP(美国微芯) Microchip ATtiny1614/1616/1617 tinyAVR 1-series 8-bit microcontroller, AVR CPU running up to 20MHz, up to 16KB self-programmable Flash memory, 256B EEPROM and 2KB SRAM, 1.8V to 5.5V operating voltage range, single-pin UPDI programming and debug interface, power-on reset and brown-out detector, internal 16/20MHz oscillator, timers, watchdog, USART, SPI, I2C/TWI, 10-bit ADC, DAC, analog comparators, event system, configurable custom logic and peripheral touch controller, available in 14-pin, 20-pin and 24-pin packages depending on variant. Search Keywords: ATtiny1614, ATtiny1616, ATtiny1617, Microchip ATtiny1614, Microchip ATtiny1616, Microchip ATtiny1617, tinyAVR 1-series, AVR 8-bit microcontroller, ATtiny 16KB Flash, ATtiny UPDI, ATtiny1616 microcontroller, ATtiny1617 MCU, ATtiny1614 MCU, 20MHz AVR microcontroller, ATtiny I2C SPI USART, ATtiny1616 datasheet, ATtiny1614 datasheet, ATtiny1617 datasheet Hashtags: #ATtiny1614 #ATtiny1616 #ATtiny1617 #MicrochipATtiny #MicrochipMCU #tinyAVR #tinyAVR1Series #AVRMicrocontroller #8bitMicrocontroller #ATtinyMCU #UPDI #16KBFlashMCU #20MHzMCU #I2CMCU #SPIMCU #USARTMCU #ADCmicrocontroller #TouchControllerMCU

BQ25798RQMR QFN-29_L4.0-W4.0-P0.40-TL-BQ25792RQMR LCSC Part Number: C2876593 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments BQ25798 fully integrated switch-mode buck-boost battery charger for 1-4 cell Li-ion and Li-polymer batteries, supports USB PD 3.0 power profile, integrates four switching MOSFETs, BATFET, input and charging current sensing, 3.6V to 24V input operating range with 30V absolute maximum, 750kHz or 1.5MHz switching frequency, up to 5A charging current with 10mA resolution, up to 96.5% efficiency, supports MPPT for photovoltaic charging, USB BC1.2/HVDCP/non-standard adapter detection, NVDC power path management, USB OTG output from 2.8V to 22V up to 3.32A, I2C control, integrated 16-bit ADC, low quiescent current, thermal regulation, OVP/OCP protection, safety timer, 29-pin 4x4mm QFN package. Search Keywords: BQ25798, Texas Instruments BQ25798, TI BQ25798, BQ25798 battery charger, BQ25798 buck boost charger, BQ25798 Li-ion charger, BQ25798 Li-polymer charger, 1-4 cell battery charger, USB PD 3.0 battery charger, buck boost charger IC, NVDC power path charger, MPPT battery charger IC, photovoltaic battery charger, USB OTG charger IC, 5A charging current charger, I2C battery charger, BQ25798 QFN-29, 4x4mm QFN charger, BQ25798 datasheet Hashtags: #BQ25798 #TexasInstrumentsBQ25798 #TIBatteryCharger #BatteryChargerIC #BuckBoostCharger #LiIonCharger #LiPolymerCharger #1to4CellCharger #USBPDCharger #USBPD30 #NVDCCharger #PowerPathManagement #MPPTCharger #PhotovoltaicCharger #USBOTGCharger #5ACharger #I2CCharger #IntegratedADC #QFN29 #4x4mmQFN

UCC27211ADRMR VSON-8_L4.0-W4.0-P0.80-TL-EP LCSC Part Number: C1848363 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments UCC27211 120V half-bridge gate driver for two N-channel MOSFETs in high-side and low-side configuration, 3.7A source and 4.5A sink peak output currents, integrated 120V bootstrap diode, 8V to 17V VDD operating range, TTL-compatible independent inputs, input pins tolerate -10V to 20V, fast 20ns typical propagation delay, 7.2ns rise and 5.5ns fall time with 1000pF load, 4ns delay matching, symmetrical UVLO protection for high-side and low-side drivers, -40°C to +150°C operating temperature, available in SOIC-8, PowerPAD SOIC-8 and WSON-10 packages. Search Keywords: UCC27211, Texas Instruments UCC27211, TI UCC27211, UCC27211 half bridge driver, UCC27211 gate driver, UCC27211 MOSFET driver, 120V half bridge gate driver, 3.7A 4.5A gate driver, high side low side driver, N-channel MOSFET driver, UCC27211 SOIC-8, UCC27211 PowerPAD, UCC27211 WSON-10, UCC27211 8V UVLO, UCC27211 bootstrap diode, UCC27211 datasheet Hashtags: #UCC27211 #TexasInstrumentsUCC27211 #TIGateDriver #HalfBridgeDriver #HalfBridgeGateDriver #MOSFETDriver #NChannelMOSFETDriver #HighSideLowSideDriver #120VGateDriver #3A7GateDriver #4A5GateDriver #BootstrapDiodeDriver #UVLODriver #TTLInputDriver #SOIC8 #PowerPADSOIC8 #WSON10

Buffers / Drivers SN74HCT125DRE4 SOIC-14_L8.6-W3.9-P1.27-LS6.0-BL LCSC Part Number: C2675588 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments SN74HCT125/SN54HCT125 quadruple bus buffer IC with 3-state outputs, contains four independent non-inverting buffers with TTL-compatible inputs, positive logic function Y=A, 4.5V to 5.5V operating voltage range, high-current outputs capable of driving up to 15 LSTTL loads, ±6mA output drive at 5V, low input current, typical 12ns propagation delay, suitable for bus line driving, memory address buffering and digital logic interface applications, available in SOIC-14 and PDIP-14 packages. Search Keywords: SN74HCT125, SN54HCT125, Texas Instruments SN74HCT125, TI SN74HCT125, SN74HCT125 buffer, 74HCT125 buffer, quad bus buffer, quadruple bus buffer, 3-state buffer IC, tri-state buffer IC, non-inverting buffer IC, TTL-compatible CMOS buffer, HCT logic buffer, bus line driver, memory address buffer, SN74HCT125D, SN74HCT125N, SOIC-14 buffer, PDIP-14 buffer, SN74HCT125 datasheet Hashtags: #SN74HCT125 #SN54HCT125 #74HCT125 #TexasInstrumentsSN74HCT125 #TIBufferIC #BusBuffer #QuadBusBuffer #TriStateBuffer #3StateBuffer #NonInvertingBuffer #HCTLogic #TTLCompatibleInput #LogicBufferIC #BusLineDriver #AddressBuffer #SOIC14 #PDIP14

TPS62740DSST WSON-12_L3.0-W2.0-P0.5-BL-EP LCSC Part Number: C2659003 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TPS62740/TPS62742 ultra-low-power step-down DC/DC converter, 2.2V to 5.5V input voltage range, 360nA typical quiescent current, up to 90% efficiency at 10µA load current, up to 300mA output current for TPS62740 and 400mA for TPS62742, DCS-Control architecture, up to 2MHz switching frequency, 16 selectable output voltages from 1.8V to 3.3V in 100mV steps, power-good output, slew-rate controlled load switch, output discharge function, optimized for 2.2µH inductor and 10µF output capacitor, small 2 x 3mm WSON package, suitable for Bluetooth Low Energy, RF4CE, Zigbee, industrial metering and energy harvesting applications. Search Keywords: TPS62740, TPS62742, Texas Instruments TPS62740, Texas Instruments TPS62742, TI TPS62740, TI TPS62742, TPS6274x buck converter, TPS62740 step down converter, TPS62742 step down converter, ultra low Iq buck converter, 360nA quiescent current converter, low power DC DC converter, energy harvesting buck converter, Bluetooth low energy buck converter, Zigbee power converter, 300mA buck converter, 400mA buck converter, 2x3mm WSON buck converter, TPS62740 datasheet, TPS62742 datasheet Hashtags: #TPS62740 #TPS62742 #TPS6274x #TexasInstrumentsTPS62740 #TexasInstrumentsTPS62742 #TIBuckConverter #StepDownConverter #BuckConverter #DCDCConverter #UltraLowIqConverter #360nAIq #LowPowerConverter #EnergyHarvestingConverter #BluetoothLEConverter #ZigbeeConverter #RF4CEConverter #300mABuckConverter #400mABuckConverter #DCSControl #WSONPackage

DC-DC Converters TPS63060DSCT WSON-10_L3.0-W3.0-P0.50-BL-EP-A LCSC Part Number: C2070911 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TPS63060/TPS63061 high input voltage buck-boost DC/DC converter, 2.5V to 12V input voltage range, fixed and adjustable output voltage options from 2.5V to 8V, up to 93% efficiency, 2A switch current limit, output current up to 2A in buck mode and 1.3A in boost mode depending on conditions, automatic transition between step-down and boost modes, 2.4MHz fixed-frequency operation with synchronization, power-save mode, power-good output, load disconnect during shutdown, overtemperature and overvoltage protection, available in 10-pin 3x3mm WSON package. Search Keywords: TPS63060, TPS63061, Texas Instruments TPS63060, Texas Instruments TPS63061, TI TPS63060, TI TPS63061, TPS6306x buck boost converter, TPS63060 buck boost, TPS63061 buck boost, high input voltage buck boost converter, 2.5V to 12V buck boost, 2A switch current converter, 2.4MHz buck boost converter, WSON-10 buck boost, 3x3mm buck boost converter, TPS63060 datasheet, TPS63061 datasheet Hashtags: #TPS63060 #TPS63061 #TPS6306x #TexasInstrumentsTPS63060 #TexasInstrumentsTPS63061 #TIBuckBoostConverter #BuckBoostConverter #DCDCConverter #HighInputVoltageConverter #2ASwitchCurrent #24MHzConverter #PowerSaveMode #PowerGoodOutput #LoadDisconnect #WSON10 #3x3mmPackage