File Review Request

Created 2 project docs

PCB Final Review Notes

View Document
Project: Universal Configurable 10-Battery Controller – Concept Model Date: 2026-07-13

Draft BOM - Concept Model

View Document
Project: Universal Configurable 10-Battery Controller – Concept Model Date: 2026-07-13

flux

Completed the PCB presentation cleanup: preserved the schematic, reorganized the board into labelled functional zones, added mounting holes, section boxes, polarity labels, concept warnings, and routed selected verified low-voltage/control nets without forcing the battery matrix.
Open items:
  • Remaining airwires are expected for the concept-only matrix and some unforced low-voltage items.
  • A small ESP32 module GND/mount footprint overlap warning remains.
  • I could not directly set/export saved 3D camera views from here.
Files created:
Suggested next steps:
  1. Open the 3D viewer and capture the requested presentation angles.
  2. Review the top PCB view for silkscreen readability.
  3. If this ever moves beyond presentation, redesign the high-current battery matrix from real electrical requirements.

flux

I’ll read the attached instructions and apply them to the current project if they’re actionable, without recreating the schematic unless explicitly required.

flux

Blocked: your account currently has no available ACUs, so I can’t continue executing PCB edits or checks.
Accomplished this session:
  • Read the new attachment and confirmed it is a continuation/polish request for the existing project.
  • Re-ran board/routing checks.
  • Identified the remaining ESP32 warning as two unnamed ESP32 footprint mount/dummy pads overlapping the real GND pad.
  • Attempted a non-destructive fix by disabling those duplicate dummy pads, but the latest inspection still showed them active, so the issue remains unresolved.
Remaining work:
  • Remove or correctly neutralize the two duplicate ESP32 dummy pads causing the GND/mount overlap.
  • Re-run DRC and routing precheck.
  • Continue verified low-voltage routing only, while keeping BATTERY_POWER_MATRIX_CONCEPT_ONLY conceptual.
  • Update PCB Final Review Notes, Draft BOM, and Schematic Review Notes after final checks.
Fix ESP32 pads
Show overlapping pads
List DRC errors
Remove pads manually

Waiting for input

Sign up to send

Files

Schematic

Layout

3D View

Schematic of Universal Configurable 10-Battery Controller – Concept Model

Universal Configurable 10-Battery Controller – Concept Model

Universal Configurable 10-Battery Controller – Concept Model thumbnail