Part Metadata Review and Datasheet Update

Thought for 2 mins 30 sec

Updated the STDRIVE102BP metadata and terminals:

Set project part metadata:
- Part Type: Gate Driver
- Package or Case Code: VFQFPN-48 6x6x0.9 mm
- Added implementation note: 48 leads + exposed thermal pad = 49 pads
Populated Pin Description and normalized Pin Type for all 49 terminals.
Corrected power pins to Flux-standard types like Power In / Power Out.
Verified the schematic properties were applied.
Ran component/missing-footprint review checks: no open warnings or errors found.

One caveat: the library search index still reports the old package value “TO” and blank Part Type, which may be stale or may require part-library-level property publishing beyond the editable project metadata. The active project terminals and project-level metadata are now corrected.

adrian95

add also section for all the terminal based on the datasheet.

Worked for 12 sec

flux

I’ll add a datasheet-based Section property to every terminal, grouping pins by function, then verify the updates.

Thought for 1 min 24 sec

flux

Added the Section property to all 49 STDRIVE102BP terminals, grouped by datasheet function: SPI Interface, Analog Front End/PGA blocks, Power Supplies, Charge Pump/Bootstrap, Half-Bridge driver groups, Control Inputs, Diagnostics/Protection, and Ground/Exposed Pad.

Verified the Section values are present on every terminal and ran the relevant component review checks: no open warnings or errors found.

Run full checks

Normalize section names

Verify footprint pads

Create review document

Update library metadata

Files

Pins

Symbol

Layout

3D View

STDRIVE102BP