Part Metadata Review and Datasheet Update

flux

Updated the STDRIVE102BP metadata and terminals:
  • Set project part metadata:
    • Part Type: Gate Driver
    • Package or Case Code: VFQFPN-48 6x6x0.9 mm
    • Added implementation note: 48 leads + exposed thermal pad = 49 pads
  • Populated Pin Description and normalized Pin Type for all 49 terminals.
  • Corrected power pins to Flux-standard types like Power In / Power Out.
  • Verified the schematic properties were applied.
  • Ran component/missing-footprint review checks: no open warnings or errors found.
One caveat: the library search index still reports the old package value “TO” and blank Part Type, which may be stale or may require part-library-level property publishing beyond the editable project metadata. The active project terminals and project-level metadata are now corrected.
A

adrian95

add also section for all the terminal based on the datasheet.

flux

I’ll add a datasheet-based Section property to every terminal, grouping pins by function, then verify the updates.

flux

Added the Section property to all 49 STDRIVE102BP terminals, grouped by datasheet function: SPI Interface, Analog Front End/PGA blocks, Power Supplies, Charge Pump/Bootstrap, Half-Bridge driver groups, Control Inputs, Diagnostics/Protection, and Ground/Exposed Pad.
Verified the Section values are present on every terminal and ran the relevant component review checks: no open warnings or errors found.
Run full checks
Normalize section names
Verify footprint pads
Create review document
Update library metadata
Sign up to send

Files

Pins

Symbol

Layout

3D View

STDRIVE102BP