Part Metadata Review and Datasheet Update

flux

Updated the STDRIVE102BP metadata and terminals:
  • Set project part metadata:
    • Part Type: Gate Driver
    • Package or Case Code: VFQFPN-48 6x6x0.9 mm
    • Added implementation note: 48 leads + exposed thermal pad = 49 pads
  • Populated Pin Description and normalized Pin Type for all 49 terminals.
  • Corrected power pins to Flux-standard types like Power In / Power Out.
  • Verified the schematic properties were applied.
  • Ran component/missing-footprint review checks: no open warnings or errors found.
One caveat: the library search index still reports the old package value “TO” and blank Part Type, which may be stale or may require part-library-level property publishing beyond the editable project metadata. The active project terminals and project-level metadata are now corrected.
adrian95

adrian95

add also section for all the terminal based on the datasheet.

flux

I’ll add a datasheet-based Section property to every terminal, grouping pins by function, then verify the updates.

flux

Added the Section property to all 49 STDRIVE102BP terminals, grouped by datasheet function: SPI Interface, Analog Front End/PGA blocks, Power Supplies, Charge Pump/Bootstrap, Half-Bridge driver groups, Control Inputs, Diagnostics/Protection, and Ground/Exposed Pad.
Verified the Section values are present on every terminal and ran the relevant component review checks: no open warnings or errors found.
Run full checks
Normalize section names
Verify footprint pads
Create review document
Update library metadata
Sign up to send

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    kicad_mod

    STDRIVE102BP

    QFN40P600X600X100-49N-D.kicad_modFootprint
    STDRIVE102BP-thumb.png

    STDRIVE102BP-thumb.png

    STDRIVE102BP-thumbThumbnail
    STDRIVE102BP

    STDRIVE102BP

    STDRIVE102BP Symbol.svgDefault
    stp

    STDRIVE102BP

    STDRIVE102BP.stp3D Model

    STDRIVE102BP

    STDRIVE102BP thumbnail
    6 to 50 V, Triple half-bridge gate driver with programmable currents and SPI configuration
    Motor Driver NMOS SPI 48-VFQFPN (6x6)
    STDRIVE102BP is a highly integrated triple half-bridge gate driver designed for driving 3-phase brushless DC (BLDC) motors. It can control six external N-channel MOSFETs with programmable gate drive currents, enabling optimized switching performance and reduced EMI. The device features SPI-configurable settings, integrated charge pump circuitry for 100% high-side duty-cycle operation, built-in voltage regulators, programmable analog front-end blocks, and comprehensive protection mechanisms, making it suitable for battery-powered motor control applications such as power tools, vacuum cleaners, e-bikes, robotics, and industrial automation.
    Key Features Triple half-bridge gate driver for 3-phase BLDC motor control Operating supply voltage range: 6 V to 50 V Programmable gate drive capability up to: 1 A source current 2 A sink current Integrated charge pump supporting 100% high-side duty cycle Embedded 12 V LDO regulator for gate-drive circuitry Embedded 3.3 V LDO regulator for low-voltage circuitry SPI-configurable parameters and diagnostic functions Up to three programmable-gain amplifiers (PGAs) Up to three high-speed comparators VDS monitoring for MOSFET protection Thermal shutdown protection Undervoltage lockout (UVLO) protection Dual control modes (ENx/INx or INHx/INLx) TTL-compatible logic inputs up to 5 V Ultra-low standby current consumption (<50 nA) Matched propagation delay across all channels
    #CommonPartsLibrary #IntegratedCircuit #STDRIVE102BP #STMicroelectronics #GateDriver #BLDCMotor #MotorControl #ThreePhaseMotor #MOSFETDriver #PowerTools #Robotics #IndustrialAutomation #EBike #SPI #BrushlessMotor #EmbeddedSystems #PowerElectronics

    Properties

    Official datasheet: https://www.st.com/resource/en/datasheet/stdrive102bp.pdf Part Type: Gate Driver / Motor Driver IC Package: VFQFPN-48, 6 x 6 x 0.9 mm, with exposed thermal pad (49 pads total: 48 leads + exposed pad).

    STDRIVE102BP

    STMicroelectronics

    Gate Driver

    st.com/resource/en/datasheet/stdrive102bp.pdf

    IC

    VFQFPN-48 6x6x0.9 mm

    parametric-v1

    creativecommons.org/licenses/by/4.0/

    Pricing & Availability

    See prices from popular manufacturers for your project.

    Controls