Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project
Write a project description
Find schematic issues
Create a test plan
Simulate a circuit
Prepare for Manufacturing
Component Selection Workflow
New Subsystem Wizard

Ready.

Sign up to send
que hace este circuito?
jarly

jarly

@copilot que hace este circuito?
2y

copilot

Este circuito es un controlador MOSFET de alta potencia con un driver de alta y baja potencia (IR2110) y un MOSFET (Q1).
El funcionamiento del circuito es como sigue:
  1. Driver IR2110 (U1): Este componente es un controlador MOSFET de alta y baja potencia. Recibe una señal de control (SIGNAL) que determina si el MOSFET estará encendido o apagado. El pin HIN del IR2110 recibe la señal de control y el pin HO la amplifica para controlar el MOSFET.
  2. MOSFET (Q1): Este transistor actúa como un interruptor que puede ser activado o desactivado por la señal que viene del pin HO del IR2110. Cuando la señal de control está en alto, el MOSFET conduce y permite el paso de corriente desde D a S. Cuando la señal de control está en bajo, el MOSFET se apaga y bloquea el paso de corriente.
  3. Diodo (D1): Este diodo se utiliza para proteger el circuito contra voltajes inversos que podrían dañar el MOSFET o el controlador.
  4. Resistencias (R1, R2): Estas resistencias se utilizan para limitar la corriente que fluye a través del circuito y para proteger los componentes.
  5. Capacitores (C1, C2, C3, C4): Estos componentes se utilizan para filtrar el ruido eléctrico del circuito y estabilizar la tensión.
Este circuito puede ser utilizado en una variedad de aplicaciones que requieran el control de alta potencia, como la conmutación de cargas inductivas, motores, inversores, etc.
2y
emfi2002

emfi2002

@copilot explain this circuit
2y

copilot

This circuit is a high-power MOSFET driver circuit, primarily composed of a high and low side driver (IR2110) and a MOSFET (Q1). Here's an overview of how it works:
  1. IR2110 High and Low Side Driver (U1): This integrated circuit serves as the main driver for the MOSFET. It takes a control signal (SIGNAL) as input and drives the gate of the MOSFET. This control signal is fed into the HIN pin (High side input) of the IR2110 driver and it outputs an amplified signal from its HO pin (High side output) to control the gate of the MOSFET.
  2. MOSFET (Q1): The MOSFET serves as an electronically controlled switch that is turned on or off based on the signal from the HO pin of the IR2110. When the control signal is high, the MOSFET conducts and allows current to flow from the drain (D) to the source (S). When the control signal is low, the MOSFET blocks the current flow.
  3. Bootstrap Diode (D2) and Capacitors (C1, C2): The bootstrap diode and capacitors are used to provide the necessary voltage for the high-side drive. When the low-side MOSFET is turned on, the bootstrap capacitor charges through the diode. When the high-side MOSFET is turned on, the charged bootstrap capacitor provides the necessary voltage to the high-side gate driver.
  4. Resistors (R1, R2): These resistors are used to limit the current flowing through the gate of the MOSFET. This protects the MOSFET from excessive current which could damage it.
  5. Decoupling Capacitors (C3, C4): These capacitors are connected across the power supply lines to filter out any noise or sudden changes in the power supply voltage. They help to ensure a smooth and stable power supply for the driver and the MOSFET.
  6. Protection Diode (D1): This diode provides protection against reverse voltage that could potentially damage the MOSFET.
In summary, this circuit is used to control a high-power load using a MOSFET. The control signal (SIGNAL) can be used to turn the load on or off. This sort of circuit is commonly used in motor control, power electronics, and other high-power applications.
2y
Someone is typing...
please explain what Q1 does.
lojanet

lojanet

@copilot please explain what Q1 does.
1y

copilot

In your project, Q1 is a MOSFET, specifically the model IPB054N06N3GATMA1 manufactured by Infineon Technologies. A MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) serves as an electronic switch or amplifier in circuits. Its operation is dependent on the voltage present at its gate (G) terminal, which controls the current flow between the drain (D) and source (S) terminals. In the context of your project which includes an IR2110 high-side MOSFET driver, here's a detailed function of Q1:
  1. Switching Functionality: As part of a high-side driver configuration with the IR2110, the MOSFET Q1 is used to switch high voltages and currents. When a high voltage is applied to its gate (G) relative to its source (S), the MOSFET will turn "on," allowing current to flow from the drain (D) to the source (S). Conversely, when the gate voltage is low, the MOSFET turns "off," blocking current flow.
  2. High-Side Driving: With the IR2110 driver, Q1 can be placed between the supply voltage and the load. The IR2110 is capable of driving Q1's gate with an appropriate voltage level, even above the supply voltage, to reliably turn the MOSFET on and off. This is essential for high-side switching applications where the switch (MOSFET) controls the connection of the positive supply voltage to the load.
  3. Load Control: In practical applications, this MOSFET, being driven by U1 (IR2110), can be used to control various loads such as motors, heaters, or high-power LEDs. The high-side configuration allows for easy current return to the ground without routing it through the control electronics, simplifying the overall circuit design and improving safety.
  4. Efficiency and Speed: The IPB054N06N3GATMA1 is a power MOSFET designed for efficient handling of high currents with minimal power loss due to its low on-resistance. It can switch on and off very quickly under the control of the IR2110, making it suitable for high-frequency applications or PWM (Pulse Width Modulation) control where the speed and efficiency of switching are critical.
  5. Protection and Diagnostics: When used in combination with the IR2110, it can offer features like under-voltage lockout, shoot-through protection, and fault diagnostics which are crucial for safeguarding the MOSFET under adverse conditions and ensuring the reliability of the application.
The selection of Q1 in your circuit shows a design choice aimed at controlling higher power loads efficiently and safely, especially in applications where high-side switching is preferable or necessary.
1y
lojanet

lojanet

en español
1y

copilot

Q1 es un MOSFET, específicamente un modelo IPB054N06N3GATMA1 de Infineon Technologies, que actúa como un interruptor controlado eléctricamente en el circuito. En esta configuración, está siendo utilizado junto con el controlador de MOSFET de alto lado IR2110 (U1) para conmutar una carga (conectada entre el drenador $Q1:D$ y VIN) en respuesta a las señales de control.
Función de Q1 en el circuito:
  • Actúa como un Interruptor: El MOSFET Q1 puede encenderse (conducir) o apagarse (no conducir) en respuesta a la tensión aplicada en su puerta $Q1:G$. Cuando se aplica una tensión adecuada, permite que la corriente fluya desde el drenador $Q1:D$ al surtidor $Q1:S$, encendiendo así la carga conectada.
  • Controlado por el IR2110 (U1): El IR2110 es capaz de conducir la puerta $Q1:G$ del MOSFET con una tensión adecuada para encender y apagar el MOSFET. Esto lo hace utilizando las señales de entrada $U1:HIN$ y $U1:LIN$ para controlar la conmutación del lado alto (High Side) y bajo (Low Side), respectivamente. Sin embargo, en este circuito, solo se está utilizando la funcionalidad de lado alto, como se indica por la conexión del pin $U1:HO$ al pin de la puerta $Q1:G$ a través del diodo D1 y la resistencia R1.
  • Protección: La resistencia R2 conectada entre la puerta $Q1:G$ y el surtidor $Q1:S$ actúa como una resistencia de descarga para asegurar que la puerta del MOSFET no se quede flotante (lo cual podría resultar en una conmutación indeseada) y para ayudar a definir un estado 'apagado' seguro cuando no hay señales de control activas.
Por lo tanto, Q1 es crucial para controlar el flujo de corriente hacia la carga, actuando bajo el comando del IR2110 en respuesta a las señales de entrada. Este tipo de configuración es común en aplicaciones de conmutación de potencia y control de motores, donde se necesita controlar de forma eficiente grandes cantidades de energía.
1y
Someone is typing...
16
New Comment
Someone is typing...
25
recommend a replacement for Q1.
ozgurbutu

ozgurbutu

@copilot recommend a replacement for Q1.
2y

copilot

Based on your current part, the IPB054N06N3GATMA1, you're using an N-Channel MOSFET by Infineon Technologies. I'd recommend staying within the same class of Infineon N-Channel MOSFETs as they tend to have consistent properties across different models.
Here are a few possible options that offer similar performance based on the same package, voltage rating, and current flow:
  1. BSC010N04LS: This N-Channel MOSFET also by Infineon Technologies offers a 40 V drain-source voltage with a continuous drain current of 100 A.
  2. IPB036N04N3G: It is also by Infineon Technologies and offers a 40 V drain-source voltage and a continuous drain current of 90 A.
  3. IPD50N04S4-08: This Infineon MOSFET has a 40V drain-source voltage, and a maximum continuous drain current of 100 A.
Having consistent properties across these replacements means they will likely work well for your circuit if the replacement is necessary due to something like availability issues. However, the exact choice between any given part will depend on your particular application requirements. These suggestions are made based on a general assumption of functionality and may need to be checked in terms of specific parameters such as Rds(on), switching speed, power dissipation, and so on. Please ensure to check the datasheets of these components to verify their suitability for your project.
2y
Someone is typing...
11
circuit is true?
pooria

pooria

@copilot circuit is true?
2y

copilot

From the provided schematic and netlist information, I can't definitively say whether the circuit is correct without the actual circuit diagram. However, if you follow these general steps, it should help you in the IR2110 MOSFET driver circuit design:
  1. Connecting the driver (U1: IR2110):
    • The high input (HIN) of the driver (U1) is connected to the +5V terminal.
    • The Supply Voltage pin (VDD) of the driver is connected to the +5V terminal through a decoupling capacitor (C3: 0.1uF and C4: 22uF).
    • The COM and VSS pins are connected to the ground terminal. The shutdown (SD) pin is also connected here, meaning that the shutdown feature is not being utilized in this circuit.
    • VB is connected to +12V terminal through diode D2 and capacitors C1 and C2. The anode of D2 is connected to the +12V power supply.
    • The HO pin is connected to the gate of the MOSFET (Q1) via R1 resistor and D1 diode.
    • The VS pin is connected to the source of the MOSFET (Q1: IPB054N06N3GATMA1).
  2. Connecting the MOSFET (Q1: IPB054N06N3GATMA1):
    • The Gate (G) of the MOSFET is connected to the driver HO output through a diode (D1) and resistor (R1: 10Ω).
    • The Source (S) of the MOSFET is directly attached to the ground terminal and to the VS pin of U1.
    • The Drain (D) of the MOSFET is connected to the J2:Pin_3 connector.
  3. Providing the required Voltage:
    • The circuit has two different voltages: +12V is provided to the VCC and VB of the driver, and +5V is provided to the VDD of the driver.
  4. The connectors:
    • J1 is apparently used to supply the power and signals to the driver.
    • J2 seems to be the output or input of the board.
  5. Additional components:
    • Other capacitors (C1, C2) are used for coupling and filtering purposes.
Given this setup, the IR2110 driver will drive the power MOSFET. However, if these instructions do not match your desired functioning for the circuit or you see other errors, you may need to modify your design. The specific operation will also be affected by external connections and interactions not provided in this project description. Please ensure the dimensions, terminations, and ratings of all components are suitable for their intended use cases.
Remember to always double-check connections, safety considerations, and regulatory compliance for your specific application when designing a circuit. It's always a good idea to have a professional or an experienced colleague review your design before finalizing and prototyping it.
2y
Someone is typing...
7
please explain what D1 does.
cesamav

cesamav

@copilot please explain what D1 does.
2y

copilot

The D1 diode in your circuit, as described by your project, is connected on the high side between pin HO of U1 (the IR2110 high side mosfet driver) and pin 'G' (Gate) of Q1, a power MOSFET.
This setup is likely used as a bootstrap diode. The bootstrap diode (D1) and along with the bootstrap capacitor (C1 and C2 in your circuit, connected from Vs to Vb), provide a floating supply voltage for the high-side gate drive circuitry.
In more detail, when the low-side MOSFET is turned ON, the capacitor charges up through the diode and stores energy. Afterward, this stored energy is used to drive the high-side N-Channel MOSFET (Q1 in your setup).
This bootstrapping operation only works for switching applications where the low-side MOSFET periodically turns ON, allowing the bootstrap capacitor to recharge. If it's a DC application, a dedicated isolated supply might be needed instead.
2y
Someone is typing...
10
please explain what R2 does.
cesamav

cesamav

@copilot please explain what R2 does.
2y

copilot

The resistor R2 in your project is connected between the Gate of the MOSFET (Q1:G) and the Source (Q1:S and SOURCE:P1), as well as the HO pin (U1:HO) of the IR2110 driver (U1), which is connected to the (R1:P2) resistor, and then to the Gate of Q1.
From the configuration, we can deduce that R2 serves as a pull-down resistor or discharging resistor for the gate of the MOSFET (Q1).
Here are its main purposes:
  1. It ensures that the gate voltage goes to ground (0V) when the driver U1 is not driving the MOSFET's gate. This ensures the MOSFET is turned off in absence of a driving signal.
  2. It helps in discharging the gate-source capacitance of the MOSFET quickly, which helps to turn off the MOSFET more rapidly.
  3. Limit the amount of current feeding back into the IR2110 driver through HO pin when a transient occurs at the gate of MOSFET Q1.
If I assumed the MOSFET was a N-Channel type and your circuit was an inverting high side driver configuration, and those assumptions were wrong, please correct me.
2y
Someone is typing...
9
para que funciona?
cesamav

cesamav

what is this?
2y
edgar240999

edgar240999

@copilot para que funciona?
2y

copilot

Este proyecto es un circuito de controlador de MOSFET de alto lado con un MOSFET incluido, utilizando el controlador IR2110. Este tipo de circuito se usa a menudo en aplicaciones donde es necesario cambiar (encender y apagar) un MOSFET de alto lado. Aquí están las distintas partes del circuito y su funcionamiento:
  • El controlador IR2110 (U1) se utiliza para controlar el MOSFET. Puede manejar tensión negativa transitoria, lo que lo hace resistente a los picos de voltaje que pueden ocurrir en el interruptor.
  • El MOSFET (Q1), una especie de interruptor que se puede usar para controlar grandes cantidades de corriente.
  • La resistencia (R1) y la capacitancia (C1,C2,C3,C4) son necesarias para el correcto funcionamiento del circuito. La resistencia puede limitar la corriente que fluye a través del circuito y los condensadores pueden suavizar los picos de voltaje.
  • Las diodos (D1 y D2) se utilizan para controlar la dirección del flujo de corriente en el circuito.
  • El terminal (J1) se utiliza para la entrada y salida de la señal al circuito.
  • El terminal block (J2) puede ser utilizado para conectar este circuito a otros dispositivos o circuitos.
Este circuito se podría utilizar en una variedad de aplicaciones, como en la electrónica de potencia para controlar motores, convertidores de CC a CC, y en sistemas de alimentación ininterrumpida (UPS).
2y
solohomelectro

solohomelectro

Translate to english
2y

copilot

This project is a high-side MOSFET driver circuit with an included MOSFET, using the IR2110 driver. This type of circuit is often used in applications where it is necessary to switch (turn on and off) a high-side MOSFET. Here are the different parts of the circuit and how they work:
  • The IR2110 driver (U1) is used to control the MOSFET. It can handle transient negative voltage, making it resilient to voltage spikes that can occur at the switch.
  • The MOSFET (Q1), a kind of switch that can be used to control large amounts of current.
  • Resistances (R1) and capacitances (C1,C2,C3,C4) are necessary for the correct operation of the circuit. The resistor can limit the current flowing through the circuit and the capacitors can smooth out voltage spikes.
  • Diodes (D1 and D2) are used to control the direction of current flow in the circuit.
  • The terminal (J1) is used for signal input and output to the circuit.
  • The terminal block (J2) can be used to connect this circuit to other devices or circuits.
This circuit could be used in a variety of applications, such as in power electronics to control motors, DC-to-DC converters, and in uninterruptible power supply (UPS) systems.
2y
isim

isim

alternative u1
2y

copilot

For an alternative to the IR2110 high-side MOSFET driver, you could consider several other high-side driver ICs that offer similar functionality. These alternatives can vary based on your specific needs, such as input voltage range, output current capability, and additional features like integrated protection circuits. Here are a few suggestions:
  1. IXD_614SI: This is a high-speed MOSFET driver from IXYS Corporation. It is capable of driving high-side and low-side MOSFETs and has a wide operating voltage range.
  2. UCC27321: Offered by Texas Instruments, this driver is capable of driving high-side and low-side MOSFETs. It provides high current drive capability and has a wide voltage range.
  3. MIC5019: From Microchip, this high-side MOSFET driver is capable of operating at higher voltages, making it suitable for a variety of applications. It is known for its compact size and low power consumption.
  4. FAN7388: A high-side gate driver from ON Semiconductor that can drive high-side and low-side MOSFETs. It includes features like under-voltage lockout and high current drive capability.
  5. TC4420/TC4429: These MOSFET drivers from Microchip are capable of driving high-side and low-side MOSFETs, offering high current outputs and fast switching times. They differ in their input logic polarity.
When choosing an alternative, consider the following aspects based on your project requirements:
  • Operating Voltage Range: Ensure the driver supports the voltage levels you intend to use.
  • Output Current: Verify that the driver can supply the required current to fully turn on your MOSFET.
  • Switching Speed: Depending on your application, you might need a driver capable of high-speed switching.
  • Package Type and Size: For PCB layout considerations.
  • Protection Features: Such as under-voltage lockout (UVLO), over-temperature protection, and short-circuit protection.
It's important to review the datasheets of the alternative drivers to ensure compatibility with your specific application and requirements.
2y
Someone is typing...
6
U1
Manufacturer Part Number
IR2110STRPBF
HO
D1
Manufacturer Name
KYOCERA AVX
SOURCE
SIGNAL
C3
Capacitance
0.1u F
J1
VIN
C2
Capacitance
22u F
VB
HO
VB
SOURCE
VB
VIN
C1
Capacitance
0.1u F
12V
D2
Manufacturer Name
KYOCERA AVX
R1
Resistance
10 Ω
SOURCE
+5V
12V
C4
Capacitance
22u F
J2
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
    jharwinbarrozo
    15.5k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
    jharwinbarrozo
    1.1M
Mosfet board with driver thumbnail
This is a IR2110 high side mosfet driver circuit with mosfet included. This is a circuit I use often and I believe it is time to give it its own board and project.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor

Qty 1

Digi-Key

$7.47–$10.90

LCSC

$2.72–$2.73

Mouser

$10.29

Assets

No assets added.

Controls