Part Information Review and Datasheet Extraction
7:22
Evalu.
Review.
Assess.
Processing.
Gather.
Using Schematic Tool.
Looking for "Part description and overview" in cmdt420x01501.pdf
Looking for "Number of positions or contacts" in cmdt420x01501.pdf
Looking for "Pitch" in cmdt420x01501.pdf
Looking for "Mounting height or stack height H" in cmdt420x01501.pdf
Looking for "Keying type or key code" in cmdt420x01501.pdf
Looking for "Gold plating thickness or plating specification" in cmdt420x01501.pdf
Looking for "Electrical rating current per pin and voltage rating" in cmdt420x01501.pdf
Looking for "Contact resistance specification" in cmdt420x01501.pdf
Looking for "Insulation resistance specification" in cmdt420x01501.pdf
Looking for "Dielectric withstanding voltage or voltage proof" in cmdt420x01501.pdf
Looking for "Operating temperature range or storage temperature range" in cmdt420x01501.pdf
Looking for "Recommended PCB layout or land pattern dimensions and pad sizes" in cmdt420x01501.pdf
Looking for "Mechanical dimensions outline drawing overall size and thickness" in cmdt420x01501.pdf
Looking for "Pin numbering convention and orientation view (A side B side numbering)" in cmdt420x01501.pdf
Looking for "Keep-out areas and board edge location relative to connector body" in cmdt420x01501.pdf
Looking for "Mounting peg hole size and location if applicable" in cmdt420x01501.pdf
Looking for "Packaging (tape and reel or tray) and pick-and-place features" in cmdt420x01501.pdf
Looking for "Compliance or standards (PCIe M.2, M-key) and special features" in cmdt420x01501.pdf
Running multiple web searches.
Found 0 results.
Found 10 results.
Found 1 results.
Found 10 results.
Fetching web page.
Looking for "Number of positions or contacts" in 3669914.pdf
Looking for "Pitch" in 3669914.pdf
Looking for "Height options or 4.2 mm stack height" in 3669914.pdf
Looking for "Keying options (Key M)" in 3669914.pdf
Looking for "Electrical rating: current and voltage" in 3669914.pdf
Looking for "Contact resistance" in 3669914.pdf
Looking for "Insulation resistance" in 3669914.pdf
Looking for "Dielectric withstanding voltage" in 3669914.pdf
Looking for "Operating temperature range" in 3669914.pdf
Looking for "Special features and compliance" in 3669914.pdf
Looking for "Recommended PCB layout or land pattern" in 3669914.pdf
Looking for "Pin numbering convention and orientation (A and B sides)" in 3669914.pdf
Looking for "Gold plating thickness" in 3669914.pdf
Running multiple web searches.
Looking for "Mechanical dimensions outline drawing overall size and connector height options" in ssio_pcie_m2.pdf
Looking for "Recommended PCB layout land pattern for 4.2 mm height right angle M Key" in ssio_pcie_m2.pdf
Looking for "Number of positions and contacts description (67 contacts, 75 positions)" in ssio_pcie_m2.pdf
Looking for "Electrical ratings (current per contact, voltage rating), contact resistance, insulation resistance, dielectric withstanding voltage" in ssio_pcie_m2.pdf
Looking for "Gold plating thickness options (15u in, 30u in) and material" in ssio_pcie_m2.pdf
Using PCB Layout Tool.
- Review of available part information
- MPN: MDT420M01501
- Description: PCIe M.2 Connector, P = 0.5 mm, H = 4.2 mm, Key M, 30 µin Gold Plating
- Part Type: Connectors
- Designator Prefix: J
- Mount: Standard
- Manufacturer: Amphenol Communications Solutions
- Datasheet: https://cdn.amphenol-cs.com/media/wysiwyg/files/drawing/cmdt420x01501.pdf
- Datasheet URL check and update
- The Datasheet URL is already set on this part. No update required.
- Datasheet and series PDF extraction (metadata summary) Documents used:
- Drawing (MDT420M01501): https://cdn.amphenol-cs.com/media/wysiwyg/files/drawing/cmdt420x01501.pdf
- Series datasheet (Gen 5): https://www.farnell.com/datasheets/3669914.pdf
- Series datasheet (SSIO PCIe M.2, Gen 3/4/5 family): https://cdn.amphenol-cs.com/media/wysiwyg/files/documentation/datasheet/ssio/ssio_pcie_m2.pdf
- Form factor: PCIe M.2 (NGFF) card edge connector
- Pitch: 0.50 mm (series datasheet)
- Positions / contacts: 75 positions (series) / 67 contacts (active) (series datasheet)
- Orientation: Right angle (series)
- Height: 4.2 mm (series table entries for 4.2 mm variants including Key M)
- Keying: Key M (per MPN family and series tables)
- Plating options (series): Au flash / 15 µin Au / 30 µin Au; your MPN indicates 30 µin Au
- Materials (series): Contacts: copper alloy with gold plating; Housing: UL 94 V-0
- Current rating:
- 0.75 A per power contact (continuous) (Gen 5 datasheet: Farnell PDF)
- 0.5 A per power contact (continuous) (SSIO series PDF)
- Note: two series sources list different continuous current ratings; use the stricter/official document for the exact MPN where available.
- Voltage rating: 50 V AC per contact (both series PDFs)
- Low-level contact resistance: 55 mΩ max initial; 20 mΩ max change (series)
- Insulation resistance: > 5 × 10^8 Ω at 500 V DC (series)
- Dielectric withstanding voltage: > 300 V AC (RMS) at sea level (series)
- Operating temperature: -40 °C to +80 °C (series)
- Compliance/features (series): Fully compliant with PCI-SIG PCIe M.2; supports angled insertion; multiple keying/height options; right angle and vertical options available in family.
- The drawing (cmdt420x01501.pdf) contains the mechanical outline and recommended PCB land pattern for this exact MPN.
- Automated text extraction from the drawing did not return numeric dimensions. Please refer to the drawing PDF directly for:
- Pad sizes and spacing
- Connector outline and seating plane
- Mounting features/peg geometry and locations
- Board edge-to-connector body relationships (if shown)
- Connector manufacturers typically do not define interface signal names in the product drawing; pin functions are governed by the PCI-SIG M.2 specification for the M-key variant.
- The series datasheets reviewed do not include a full pin function table. Use the M.2 (M-key) specification for functional pin mapping when assigning signals.
- Cross-check: schematic symbol and footprint vs. datasheet
- Pin count: The symbol instantiates numbered terminals P1–P75, consistent with “75 positions” in the series documentation. Examples:
- SIGNAL/GND_1 has Pin Number 1 (top row end)
- SIGNAL/GND_2 has Pin Number 2 (bottom row end)
- SIGNAL_1 has Pin Number 5
- SIGNAL/GND_39 has Pin Number 75
- Mechanical pins: MP1 and MP2 are present in the symbol with Pin Numbers 76 and 77, respectively. Good.
- Naming: Many terminals are generically named “SIGNAL_x”, “GND_x”, or “SIGNAL/GND_x”. This is acceptable for a generic connector, but for system clarity you may later want to rename nets per the M.2 M-key spec (not required for footprint correctness).
- Pad inventory: The footprint contains a Pads container with entries corresponding to the symbol terminals and includes MP1 and MP2 mechanical pads. This aligns with the expected contact/peg set for a 75-position M.2 connector.
- Pad pitch: Expected per datasheet is 0.50 mm. The current PCB data does not expose numeric pad-to-pad pitch here; verification against the drawing is recommended.
- Land pattern dimensions: Not machine-extracted from the drawing; manual check against the drawing PDF is required to confirm pad sizes, solder mask/solder paste apertures, and exact pad-to-body relationships.
- Keying/board keepouts: For host connectors, the module’s notch provides keying; the housing geometry is defined by the connector body. No contrary features are indicated in the layout snapshot; verify any keepout or mechanical outlines provided in the drawing.
- PASS: Pin/position count alignment with series spec (75 positions) and presence of mechanical pegs (MP1, MP2).
- UNKNOWN: Pad pitch and all land pattern detailed dimensions were not text-extractable. Please cross-check the footprint against the drawing (cmdt420x01501.pdf) for:
- 0.50 mm contact pitch
- Individual pad sizes and gaps
- Mounting peg pad/hole dimensions/locations (if applicable to this specific housing variant)
- Recommended mask/paste apertures and any stated tolerances
- NOTE: Electrical ratings show differing continuous current per contact between two series documents (0.75 A vs 0.5 A). Confirm which series rev applies to MDT420M01501 when finalizing current budgets.
- OPTIONAL: Consider renaming connector pins/nets in the schematic to match M.2 M-key functional naming for easier system integration.
- Extract exact land-pattern and outline dimensions by manually referencing the drawing PDF into structured notes, and
- Annotate the footprint checks (pitch, pad sizes, peg geometry) item-by-item once those numbers are captured.
Ready.
Reviews
- Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portaljharwinbarrozo43.0M
- Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #powerjharwinbarrozo11.4M
- A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #genericsjharwinbarrozo15.6k
- An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.Terminal
- 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlinkjharwinbarrozo1.2M
- 10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcanjharwinbarrozo1.2M
- Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlinkjharwinbarrozo1.1M
Pricing & Availability
See prices from popular manufacturers for your project.
Assets
MDT420M01501
MDT420M01501.kicad_modFootprint
MDT420M01501
MDT420M01501 Symbol.svgDefault
MDT420M01501-thumb.png
MDT420M01501-thumbThumbnailMDT420M01501
MDT420M01501.stp3D ModelControls
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.