Schematic Symbol for LM7812ACT: LM78XXA Series 12 V Fixed Output 1...

Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project

Write a project description

Find schematic issues

Create a test plan

Operating conditions

Verify Part Details

Part Specifications

Recommend similar parts

Ready.

GND

explain this project.

andi77

@copilot explain this project.

copilot

This project seems to be a simple setup involving a 12V voltage regulator from the LM78XXA series. Here's a breakdown:

Component: The main component here is the LM78XXA Series 12V fixed output, 1A, 3-terminal LDO (Low Dropout) voltage regulator encapsulated in a TO-220 package. This is a common voltage regulator used to provide a stable 12V output from a higher voltage input.
Designators:
- $VI$: Represents the input voltage pin where you would connect the supply voltage, which should be higher than 12V to ensure proper regulation.
- $VO$: Represents the output voltage pin, which in this case will provide a regulated 12V supply.
- $GND$: Represents the ground pin, which is used to complete the circuit. Both the input and output share this common ground.
No connections made yet: This project currently hasn't established any connections between the components. Essentially, the voltage regulator is ready to be connected to input and output terminals.

Typical Connection Setup:

Connect $VI$:Pin 1 to your higher input voltage source.
Connect $VO$:Pin 3 to the device or circuit requiring a 12V supply.
Connect $GND$:Pin 2 to the common ground of your system.

This kind of setup is typically used when you need a stable voltage supply for circuits that require 12V. The regulator ensures the output maintains a consistent voltage, even if the input voltage varies slightly.

Feel free to ask if you need more details or recommendations on how to proceed with this schematic!

andi77

uin15v uout12v

copilot

To convert an input voltage $U_{in}$ of 15V to an output voltage $U_{out}$ of 12V, the LM78XXA series voltage regulator is appropriate. Here's how you can connect it:

Connections:

Input Voltage (15V):
- Connect the 15V input voltage to VI:Pin 1.
Output Voltage (12V):
- Connect the load or the circuit requiring the 12V regulated output to VO:Pin 3.
Ground:
- Connect the ground of your input voltage source and the load to GND:Pin 2.

Additional Notes:

Input Capacitor: You may want to add a decoupling capacitor (e.g., 0.33 µF ceramic capacitor) between VI and GND to stabilize the input voltage.
Output Capacitor: Similarly, consider adding a capacitor (e.g., 0.1 µF ceramic capacitor) between VO and GND for output stability.

This configuration will ensure that your device receives a steady 12V output from a 15V input, with the LM78XXA managing the regulation. Let me know if you need more help with the wiring or have any questions about additional components!

andi77

do this in the schematic

copilot

To represent the connections in the schematic, you can follow these steps to wire the components appropriately in Flux:

Steps to Complete the Schematic:

Import Components:
- Make sure you have the LM78XXA voltage regulator ready in the Flux workspace.
- Also, have two capacitors for input and output decoupling. Let's assume the designators for these are C1 and C2.
Connections:
- Input Voltage (15V):
  - Connect VI:Pin 1 to your 15V power source.
  - Connect C1:1 to VI:Pin 1.
  - Connect C1:2 to GND:Pin 2.
- Ground:
  - Connect the ground terminal of your input voltage source, C1:2, and your load to GND:Pin 2.
- Output Voltage (12V):
  - Connect VO:Pin 3 to your load or the circuit requiring 12V.
  - Connect C2:1 to VO:Pin 3.
  - Connect C2:2 to GND:Pin 2.

Schematic Overview:

Here's a simple text representation of the connections:

Input Capacitor C1:
- Connect C1:1 to VI:Pin 1.
- Connect C1:2 to GND:Pin 2.
Output Capacitor C2:
- Connect C2:1 to VO:Pin 3.
- Connect C2:2 to GND:Pin 2.

Feel free to set this up in Flux and let me know if you encounter any issues or need further assistance!

Someone is typing...

Reviews

Electrical Rule Checks

Missing Footprints

Reports parts that have no footprint.

Design Rule Checks

Overlapping Copper

Reports copper elements that are shorting.

Invalid Layer

Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.

Component Overrides

Reports components that have been modified using the "!important" flag.

Airwires

Reports missing routed traces between pads in a net.

Deprecated Rules

Reports nodes that are using rules that are not supported anymore.

Layers with Multiple Fills

Reports layers that have multiple copper fills of different nets. Make sure the Connected Layers rule value of nets with fills is valid.

Floating Copper

Detect any via, trace or copper fill island that is not connected to any net.

Protected Intrusions

Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.

Manufacturing

Manufacturer Part Number

Reports parts that have no manufacturer part number.

Parts Available

Beta

Checks that all parts have a part number and are available from distributors.

System Checks

Auto-Layout

Beta

Reports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.

Passive Components

Resistor Power Rating

Beta

Checks that the power traveling across a given resistor is under its rating with 50% headroom.

Learn more

Pull Up/Pull Down Presence

Beta

Checks that IC pins that require pull up or pull down resistors have them.

Learn more

Capacitor Voltage Rating

Beta

Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.1k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M