Part Specification Review

flux

I reviewed the current part project for IMLT65R015M2HXTMA1.
  • A datasheet URL is already set in the project properties, so no web search or property update was needed.
  • The symbol pin mapping is mostly consistent with the datasheet.
  • The main issue I found is a likely footprint mismatch: the datasheet indicates a separate central drain tab land in addition to pins 9-16, but the current footprint appears to contain only 16 pads.
Part information found Project vs datasheet summary

Table

FieldIn projectFrom datasheetStatus
MPNIMLT65R015M2HXTMA1IMLT65R015M2HXTMA1OK
ManufacturerInfineonInfineon TechnologiesOK
DescriptionN-Channel 650 V 142 A 600 W Surface Mount PG-HDSOP-16-6SiC MOSFET, single N-channel, 650 V, 142 A, CoolSiC G2, PG-HDSOP-16Mostly OK
MountSurface MountSurface MountOK
Package namingNot a dedicated package property in current metadataPG-HDSOP-16 / HDSOPMinor cleanup opportunity
Pin countImplied by symbol/footprint16 leadsOK
Key specs from the datasheet

Table

ParameterValue
Device typeSilicon carbide MOSFET, single N-channel
SeriesCoolSiC G2
VDS650 V
Continuous drain current142 A at TC = 25 C
Continuous drain current101 A at TC = 100 C
Pulsed drain current398 A
RDS(on), typ14.5 mOhm at VGS = 18 V, 25 C
Power dissipation600 W at TC = 25 C
Total gate charge Qg79 nC typ
PackagePG-HDSOP-16
Notable noteDrain is pins 9-16 plus tab
Symbol cross-check Datasheet pin functions

Table

Datasheet pinsFunctionCurrent symbol terminals
1-6Power SourcePOWER_SOURCE_1, POWER_SOURCE_2, POWER_SOURCE_3, POWER_SOURCE_4, POWER_SOURCE_5, POWER_SOURCE_6
7Driver SourceDRIVER_SOURCE
8GateGATE
9-16DrainDRAIN_1, DRAIN_2, DRAIN_3, DRAIN_4, DRAIN_5, DRAIN_6, DRAIN_7, DRAIN_8
Symbol findings
  • Pin count and numbering match the datasheet's 16-lead assignment.
  • Functional naming matches the datasheet well:
    • pins 1-6 as Power Source
    • pin 7 as Driver Source
    • pin 8 as Gate
    • pins 9-16 as Drain
  • The symbol is electrically organized correctly for a Kelvin-source MOSFET.
Symbol issues / incompleteness
  • All current terminals have Pin Type = Unspecified. That is not a datasheet mismatch, but it is incomplete metadata.
  • I do not see datasheet-style per-pin descriptions stored as properties on the terminals. The names are good, but the descriptive metadata is sparse.
Footprint cross-check Current footprint
  • The layout contains:
    • a Footprint node
    • 16 pad nodes corresponding to the 16 symbol terminals
Datasheet expectation
  • The datasheet package information says:
    • Drain = pins 9-16, Tab
  • The footprint / land pattern notes describe:
    • 16 outer pads
    • plus a large central rectangular copper area under the package
  • That means the package expects a separate drain tab land in the PCB footprint.
Footprint finding
  • Likely mismatch: the current footprint appears to have only the 16 named pads, with no separate central drain tab pad visible.
  • If that is correct, the footprint is incomplete relative to the datasheet land pattern.
Mismatches and flags

Table

AreaFindingSeverity
MPNMatches datasheetOK
ManufacturerMatches datasheetOK
Symbol pin count16 matches datasheetOK
Symbol pin namingMatches datasheet functional groupingOK
Terminal metadataPin types are all UnspecifiedMinor
Pin descriptionsNot fully populated from datasheetMinor
FootprintMissing explicit central drain tab pad compared with datasheet land patternMajor
Package naming consistencyProject description says PG-HDSOP-16-6, datasheet extraction says PG-HDSOP-16Minor
Recommended next steps
  1. Fix the footprint first
    • Add the central drain tab pad if it is truly missing.
    • Ensure it is electrically tied to the Drain.
  2. Improve terminal metadata
  3. Normalize package metadata
    • Add or align the package field to the exact datasheet naming you want to use consistently.
If you want, I can next do a pin-by-pin sync checklist for all terminals and give you the exact metadata that should be added to each one.
Fix footprint mismatch
Add pin metadata
Normalize package naming
Sign up to send

No files yet

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    IMLT65R015M2HXTMA1

    IMLT65R015M2HXTMA1 Symbol.svgDefault

    IMLT65R015M2HXTMA1.kicad_mod

    FP_IMLT65R015M2HXTMA1Footprint
    IMLT65R015M2HXTMA1.stp

    IMLT65R015M2HXTMA1.stp

    3D_IMLT65R015M2HXTMA13D Model
    IMLT65R015M2HXTMA1-thumb.png

    IMLT65R015M2HXTMA1-thumb.png

    IMLT65R015M2HXTMA1-thumbThumbnail

    IMLT65R015M2HXTMA1

    IMLT65R015M2HXTMA1 thumbnail
    N-Channel 650 V 142A (Tc) 600W (Tc) Surface Mount PG-HDSOP-16-6 #CommonPartsLibrary #Transistor #FET #Mosfet #CoolSiC™ Gen 2

    Properties

    IMLT65R015M2HXTMA1

    Infineon

    Transistor

    g.componentsearchengine.com/ga/123456456789Aa

    Q

    Surface Mount

    creativecommons.org/licenses/by/4.0/

    Pricing & Availability

    DPN

    Stock

    Qty 1

    2

    0

    $9.227–$14.0226

    1

    0

    $8.0235

    1

    12

    $19.6534

    1

    1.1K

    $18.27

    Controls