Part Information Review and Update

Thought for 1 min 44 sec

I reviewed the current part project against the datasheet workflow: use the datasheet as the source of truth, match the pin count exactly, and flag any missing or incorrect metadata rather than guessing

Result

Datasheet URL already exists, so no web search/update was needed.
The part project is mostly structurally consistent for a 10-pin dual-row connector.
The main issues are missing metadata/detail, not obvious numbering errors:
- No package/case code property
- No pin descriptions
- All terminals still have Pin Type = Unspecified
- Project description is present but could be more specific

Current project metadata vs datasheet Summary

Table

Field	In project	From datasheet / source	Status
Manufacturer	Sullins	Sullins	OK
MPN	GRPB052VWVN-RC	GRPB052VWVN-RC	OK
Part Type	Connectors	Connector / dual-row male header	OK
Designator Prefix	J	Connector-style prefix is appropriate	OK
Mount	PCB	Through-hole PCB header	OK
Datasheet URL	Set	Set	OK
Package / Case Code	Not present	Straight dual-row 0.050 in / 1.27 mm male header, through-hole	Missing
Description	`CONN HEADER .050" 10PS DL PCB AU`	Dual-row male header, straight, 10 positions, gold finish	Acceptable but terse

Key specs from the datasheet Datasheet-derived specs

Table

Spec	Value
Function	Straight dual-row male header
Positions	10
Rows	2
Pitch	0.050 in / 1.27 mm
Row spacing	0.050 in / 1.27 mm
Mounting	Through-hole
Contact finish	Gold flash overall
Current rating	1 A
Withstand voltage	500 VAC dielectric
Operating temperature	-40°C to +105°C
Pin style	0.016 in / 0.40 mm square pins
Recommended hole size	0.028 ± 0.002 in / 0.70 ± 0.05 mm

Symbol / pin audit What exists now

The schematic contains exactly 10 terminal components, numbered 1 through 10.
The symbol arrangement appears to be:
- Left side: 1, 3, 5, 7, 9
- Right side: 2, 4, 6, 8, 10

That matches the standard dual-row numbering described in the datasheet for the 10-position version.

Symbol audit

Table

Check	Result
Pin count matches datasheet	Yes
Odd/even row arrangement matches datasheet convention	Yes
Pin numbers present	Yes
Pin names/descriptions populated	No
Pin types populated	No

Notes

For this connector, the lack of named signals is not necessarily wrong, because the datasheet does not assign functional names beyond contact numbers.
However, the terminals should still ideally have short descriptions like Contact 1, Contact 2, etc., or similar concise labels per the recommended part-project audit workflow
Pin Type = Unspecified is not ideal. For a connector, Passive is usually more appropriate than Unspecified when there is no directional behavior.

Footprint audit What exists now

The PCB footprint contains 10 pads, designators 1 through 10.
So the footprint pad count matches the symbol terminal count.

Footprint audit

Table

Check	Result
Pad count = 10	Yes
Pad numbering 1-10 present	Yes
Symbol-to-footprint count consistency	Yes
Mechanical dimensions visible in current project data	Limited
Can confirm exact drill/pad geometry from project data alone	No

Datasheet mechanical expectations

For the 10-position version, the footprint should reflect:

2 x 5 through-hole grid
1.27 mm pitch along each row
1.27 mm row spacing
0.70 mm finished hole target from the recommended layout
Straight vertical male header form factor

From the project data I can confirm the 10-pad structure, but I cannot fully verify exact drill diameter, pad size, and courtyard/body outline dimensions from the currently returned layout fields.

Mismatches / issues found Flags

Table

Item	Status	Details
Datasheet URL	OK	Already set
MPN	OK	Matches
Manufacturer	OK	Matches
Part type	OK	Reasonable
Pin count	OK	10 in symbol and footprint
Pin numbering pattern	OK	Odd/even dual-row pattern is consistent
Pin descriptions	Issue	Missing on all terminals
Pin types	Issue	All set to `Unspecified`
Package / case metadata	Issue	Missing or not explicit
Full mechanical footprint verification	Partial	Need exact pad/drill geometry output to confirm completely

Recommended cleanup

Based on the part-project sync guidance, the next improvements would be: exact metadata alignment, terminal property completion, and verifying every pin property against the datasheet rather than leaving them unspecified

Recommended updates

Table

Property / field	Recommended value
Description	`Straight dual-row male header, 10 positions, 1.27 mm pitch, through-hole, gold flash`
Package or Case Code	Something explicit like `TH_HEADER_2X05_1.27MM_STRAIGHT`
Terminal Pin Type	`Passive` for pins 1-10
Terminal Pin Description	`Contact 1` ... `Contact 10`

Bottom line

No hard mismatch found in the basic part structure.
The part appears to be a 10-pin dual-row through-hole header with correct 1-10 terminal/pad count and a reasonable odd/even numbering layout.
The main problems are incompleteness, not wrong geometry:
- missing package metadata
- missing pin descriptions
- terminals left as Unspecified

If you want, I can do the next pass and fill in the missing terminal properties and tighten the project metadata.

Fix pin metadata

Verify footprint geometry

Tighten part description

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.2k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k