Part Metadata Review and Verification
2:35
Organizing project tasks.
Analyzing the schematic.
Analyzing the PCB layout.
Looking for "device description and features" in bq25773.pdf
Looking for "absolute maximum ratings" in bq25773.pdf
Looking for "recommended operating conditions" in bq25773.pdf
Looking for "electrical characteristics" in bq25773.pdf
Looking for "pin functions and descriptions" in bq25773.pdf
Looking for "package information mechanical dimensions" in bq25773.pdf
Looking for "package option addendum REE VQFN dimensions thermal pad" in bq25773.pdf
Looking for "pin configuration REE 37 VQFN" in bq25773.pdf
Looking for "Table 5-1 pin functions MODE PSYS PROCHOT SCL SDA CMPOUT BATDRV VSYS SW2 HIDRV2 BTST2 LODRV2 REGN_B LODRV1_B BTST1_B HIDRV1_B SW1_B Bottom Pad" in bq25773.pdf
Looking for "pin functions MODE 16 PSYS 17 PROCHOT 18 SCL 20 SDA 19 CMPOUT 21 BATDRV 26 VSYS 27 SW2 28 HIDRV2 29 BTST2 30 LODRV2 31 REGN_B 32 LODRV1_B 33 BTST1_B 34 HIDRV1_B 35 SW1_B 36 Bottom Pad PGND" in bq25773.pdf
Looking for "Figure 5-1 top view pin configuration names around pins 26 to 36 and bottom pad PGND" in bq25773.pdf
Looking for "layout guidelines exposed pad thermal pad PGND multiple vias" in bq25773.pdf
Looking for "recommended land pattern REE0036A footprint dimensions" in bq25773.pdf
Confirming symbol consistency.
Reviewing pin configurations.
Clarifying terminology and linking.
Linking components correctly.
Considering thermal pad dimensions.
Identifying potential mismatches.
Organizing project details.
1. Part review
Symbol/footprint structure found in the part project
4. Symbol and footprint cross-check
Bottom line
Available part metadata
| Field | Value |
|---|---|
| MPN | BQ25773REER |
| Manufacturer | Texas Instruments |
| Description | Battery Management IC, 2-cell to 5-cell NVDC dual-phase buck-boost battery charge controller with system power monitor |
| Datasheet | |
| Project package property | TO |
| Datasheet package | REE (WQFN, 36) |
| Datasheet body size | 4.00 mm x 5.00 mm |
| Datasheet max height | 0.8 mm |
| Symbol terminal count in project | 37 |
| Footprint pad count in project | 37 |
| 3D model | Present |
- The symbol contains 37 terminals: 36 numbered pins + 1 exposed pad.
- The footprint contains 37 pads: 36 perimeter pads + 1 large center pad.
- The center pad is assigned to PGND, which matches the datasheet’s Bottom pad (PGND) requirement.
- A datasheet URL is already set on the part.
- Because it already exists, no web search or property update was needed.
Device summary
| Category | Summary |
|---|---|
| Device type | Synchronous NVDC buck-boost battery charge controller |
| Battery support | 2-cell to 5-cell |
| Input source support | USB adapter, USB-C PD SPR, USB-C PD EPR, traditional adapters |
| Input operating range | 3.5 V to 40 V |
| Charge current | Up to 16.3 A / 30 A based on 5 mOhm / 2 mOhm sense resistor |
| Input current limit | Up to 8.2 A / 16.4 A based on 10 mOhm / 5 mOhm sense resistor |
| OTG | 3 V to 5 V, up to 3 A based on 10 mOhm sense resistor |
| Switching frequency | 600 kHz / 800 kHz programmable |
| Interface | I2C |
| ADC | Integrated 16-bit ADC |
| Accuracy | ±0.5% charge voltage regulation, ±2% charge current regulation, ±2% input current regulation, ±2% input/charge current monitor |
Special features
| Feature | Notes |
|---|---|
| NVDC architecture | System stays regulated and can keep operating even if battery is discharged or removed |
| Quasi dual phase buck-boost | Seamless transition between buck, buck-boost, and boost |
| Pass Through Mode | Claimed >99% efficiency |
| DRSS | Dual random spread spectrum for EMI performance |
| ICO | Input Current Optimizer |
| FRS | Integrated Fast Role Swap for USB-PD |
| Intel platform support | IMVP8 / IMVP9 features including VAP and PROCHOT behavior |
| PSYS | System power monitor output |
| Protection | Thermal regulation, thermal shutdown, input/system/battery OVP, MOSFET and inductor OCP |
Absolute maximum ratings
| Parameter | Range |
|---|---|
| ACN_A, ACP_A, ACN_B, ACP_B, VBUS, VSYS | -0.3 V to 45 V |
| SW1_A, SW1_B, SW2 | -2 V to 45 V |
| SRN, SRP | -0.3 V to 30 V |
| BATDRV | -0.3 V to 35 V |
| BTST1_A, BTST1_B, HIDRV1_A, HIDRV1_B | -0.3 V to 50 V |
| BTST2, HIDRV2 | -0.3 V to 50 V |
| LODRV1_A, LODRV1_B, LODRV2 (25 ns) | -4 V to 5.5 V |
| HIDRV1_A, HIDRV1_B (25 ns) | -4 V to 50 V |
| HIDRV2 (25 ns) | -4 V to 50 V |
| SW1_A, SW1_B (25 ns) | -4 V to 45 V |
| SW2 (25 ns) | -4 V to 45 V |
| SDA, SCL, REGN_A, REGN_B, CHRG_OK, CELL_BATPRES, ILIM_HIZ, LODRV1_A, LODRV1_B, LODRV2, CMPIN_TR, CMPOUT, MODE, EN_OTG | -0.3 V to 5.5 V |
| /PROCHOT | -0.3 V to 5.5 V |
| IADPT, IBAT, PSYS | -0.3 V to 3.6 V |
| BTST1_A-SW1_A, BTST1_B-SW1_B, BTST2-SW2, HIDRV1_A-SW1_A, HIDRV1_B-SW1_B, HIDRV2-SW2, BATDRV-SRP | -0.3 V to 5.5 V |
| SRP-SRN, ACP_A-ACN_A, ACP_B-ACN_B | -0.3 V to 0.3 V |
| Junction temperature | -40 C to 150 C |
| Storage temperature | -55 C to 150 C |
Recommended operating conditions
| Parameter | Range |
|---|---|
| ACP_A, ACN_A, ACP_B, ACN_B, VBUS | 0 V to 40 V |
| VSYS | 0 V to 23 V |
| SRP, SRN | 0 V to 23 V |
| SW1_A, SW1_B | -2 V to 40 V |
| SW2 | -2 V to 23 V |
| BTST1_A, BTST1_B, HIDRV1_A, HIDRV1_B | 0 V to 45 V |
| BTST2, HIDRV2, BATDRV | 0 V to 28 V |
| SDA, SCL, REGN_A, REGN_B, CHRG_OK, CELL_BATPRES, ILIM_HIZ, LODRV1_A, LODRV1_B, LODRV2, CMPIN_TR, CMPOUT, MODE, EN_OTG | 0 V to 5.3 V |
| /PROCHOT | 0 V to 5 V |
| IADPT, IBAT, PSYS | 0 V to 3.3 V |
| Differential: BTSTx-SWx, HIDRVx-SWx, BATDRV-SRP | 0 V to 5 V |
| Differential: SRP-SRN, ACP_A-ACN_A, ACP_B-ACN_B | -0.2 V to 0.2 V |
| Junction temperature | -40 C to 125 C |
Selected electrical characteristics extracted
| Parameter | Value |
|---|---|
| Input voltage operating range | 3.5 V to 40.00 V |
| System voltage regulation range | 5.16 V to 23.16 V |
| Charge current regulation accuracy | -1.5% to 1.5% |
| REGN overvoltage falling threshold | 5.10 V / 5.30 V / 5.50 V min/typ/max |
| HIZ battery-powered current | 1000 uA / 1150 uA typ/max |
| PSYS gain accuracy | -3.5% to 2% |
| PSYS clamp voltage | 3.1 V / 3.3 V |
| System OVP rising threshold, 2s | 11.85 V / 12.15 V / 12.35 V |
| System OVP rising threshold, 3s | 16.8 V / 17.15 V / 17.4 V |
| System OVP rising threshold, 4s | 21.90 V / 22.3 V / 22.60 V |
| Comparator threshold | 1.18 V / 1.2 V / 1.23 V |
| EN_OTG low input | 0.8 V |
| EN_OTG high input | 1.35 V |
| I2C low input threshold | 0.42 V |
Package metadata
| Field | Value |
|---|---|
| Orderable part | BQ25773REER |
| Status | Active Production |
| Package | WQFN (REE) |
| Pin count | 36 pins |
| Body size | 4.00 mm x 5.00 mm |
| Height | 0.8 mm max |
| Lead finish | NIPDAU |
| MSL | Level-1-260C-UNLIM |
| Operating temperature | -40 C to 125 C |
| Part marking | BQ25773 |
Package dimensions extracted
| Dimension | Value |
|---|---|
| Body A | 3.9 mm to 4.1 mm |
| Body B | 4.9 mm to 5.1 mm |
| Max height | 0.8 mm |
| Lead width | 0.15 mm to 0.25 mm |
| Lead length | 0.3 mm to 0.5 mm |
| Pin pitch | 0.4 mm |
| Thermal pad | 2.6 mm to 2.8 mm |
| Datasheet land-pattern exposed pad | 3.6 mm x 2.8 mm |
Pin descriptions
| Pin | Project terminal | Datasheet description |
|---|---|---|
| 1 | LODRV1_A | Buck phase A low-side MOSFET driver output |
| 2 | REGN_A | 5 V LDO output for gate drive; requires 2.2 uF or 3.3 uF ceramic capacitor to power ground |
| 3 | BTST1_A | Bootstrap supply for phase A high-side driver; connect 0.1 uF between SW1_A and BTST1_A |
| 4 | HIDRV1_A | Buck phase A high-side MOSFET driver |
| 5 | SW1_A | Buck phase A switching node |
| 6 | VBUS | Charger input voltage; recommends 1 ohm + 0.47 uF min input low-pass filter |
| 7 | ACN_B | Phase B input current-sense negative input; RC filter required |
| 8 | ACP_B | Phase B input current-sense positive input; RC filter required |
| 9 | ACN_A | Phase A input current-sense negative input; RC filter required |
| 10 | ACP_A | Phase A input current-sense positive input; RC filter required |
| 11 | CHRG_OK | Open-drain status output; use 10 kOhm pullup |
| 12 | EN_OTG | Active-high OTG / VAP / FRS enable input |
| 13 | ILIM_HIZ | Input current-limit programming pin via resistor divider |
| 14 | IADPT | Adapter current monitor output |
| 15 | IBAT | Battery current monitor output |
| 16 | MODE | Operation mode pin; pull-down resistor required |
| 17 | PSYS | System power monitor output; resistor to ground generates voltage; clamp near 3.2 V |
| 18 | ~PROCHOT | Active-low open-drain processor hot output |
| 19 | SDA | I2C data, open-drain; use 10 kOhm pullup |
| 20 | SCL | I2C clock input; use 10 kOhm pullup |
| 21 | CMPOUT | Open-drain comparator output |
| 22 | CMPIN_TR | Comparator input / temperature regulation input; tie to ground if unused |
| 23 | CELL_BATPRES | Cell-count and battery-present pin via resistor divider; no external capacitor allowed |
| 24 | SRN | Battery current-sense negative input and battery voltage sense; use 0.1 uF filter cap across sense resistor and 10 ohm contact resistor |
| 25 | SRP | Battery current-sense positive input; use 0.1 uF filter cap across sense resistor |
| 26 | BATDRV | BATFET gate driver output |
| 27 | VSYS | Charger system voltage sense |
| 28 | SW2 | Boost switching node |
| 29 | HIDRV2 | Boost high-side MOSFET driver |
| 30 | BTST2 | Bootstrap supply for boost high-side driver; connect 0.1 uF between SW2 and BTST2 |
| 31 | LODRV2 | Boost low-side MOSFET driver |
| 32 | REGN_B | 5 V LDO output; internally connected to REGN_A; requires 2.2 uF or 3.3 uF capacitor |
| 33 | LODRV1_B | Buck phase B low-side MOSFET driver |
| 34 | BTST1_B | Bootstrap supply for phase B high-side driver; connect 0.1 uF between SW1_B and BTST1_B |
| 35 | HIDRV1_B | Buck phase B high-side MOSFET driver |
| 36 | SW1_B | Buck phase B switching node |
| Exposed pad | PGND | Common power ground thermal pad; must be soldered and tied into PGND with multiple vias |
What matches
| Check | Result |
|---|---|
| Pin naming | Looks consistent between symbol and footprint |
| Pin numbering | Looks consistent for the pins sampled against the datasheet |
| Total connection count | Looks consistent: 36 pins + exposed pad |
| Exposed pad function | Looks consistent: center pad is mapped to PGND |
| Package family / size | Looks broadly consistent with a 4 mm x 5 mm WQFN with exposed pad |
Mismatches / risks
| Severity | Issue | Why it matters |
|---|---|---|
| High | The project property Package or Case Code = TO does not match the datasheet package REE (WQFN, 36) | This can cause incorrect ordering metadata, bad library search matches, or confusion during manufacturing handoff |
| Medium | The footprint uses a center pad around 2.8 mm x 3.8 mm, while the datasheet extracts indicate thermal-pad related dimensions of 2.6 mm to 2.8 mm for package pad and 3.6 mm x 2.8 mm for land pattern | This should be manually verified because exposed-pad geometry directly affects soldering, thermal performance, and assembly yield |
| Medium | The footprint asset naming implies a generic 37-pad QFN pattern rather than explicitly the TI REE0036A package code | It may still be correct, but it increases the chance of an almost-right footprint being used for the wrong package revision |
| Medium | The datasheet explicitly requires the exposed pad to be soldered and tied into PGND with multiple vias | If the final footprint or recommended layout omits via-ready thermal strategy, the device may suffer thermal and mechanical reliability issues |
- Symbol: no obvious pin-name or pin-count problem found.
- Footprint: mostly plausible, but the package metadata is definitely wrong and the exposed-pad / land-pattern dimensions should be verified against TI REE0036A before release.
If you want, I can next turn this into a concise fix list for the part project, ordered by manufacturing risk.
Make a fix list
Check exposed pad
Review symbol pins
26 days
Ready.
Reviews
- Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portaljharwinbarrozo43.0M
- Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #powerjharwinbarrozo11.4M
- A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibraryjharwinbarrozo15.7k
- An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.Terminal
- 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlinkjharwinbarrozo1.2M
- 10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcanjharwinbarrozo1.2M
- Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlinkjharwinbarrozo1.1M
BQ25773REER
Battery Management IC 2-cell to 5-cell NVDC dual-phase buck-boost battery charge controller with system power monitor #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-charger
Properties
BQ25773REER
Texas Instruments
Integrated Circuits
IC
TO
Pricing & Availability
See prices from popular manufacturers for your project.
Controls
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.